准分子激光等离子体开关控制脉宽研究

 利用准分子激光等离子体技术,在紫外预电离XeCl准分子激光器上获得了最短1.58 ns的短脉冲激光输出。实验中分析了聚焦到薄膜表面的光束能量密度对所产生的等离子体密度的影响,并对不同等离子体密度及维持时间情况下脉冲压缩效果进行了讨论,给出了激光器谐振腔在稳定腔及非稳腔两种工作方式下的实验结果。激光器在稳定腔工作时,脉宽可压缩至2.87 ns;采用非稳腔结构时,在脉冲能量不变情况下减小聚焦光斑面积,提高入射到薄膜表面的能量密度,得到了最短1.58 ns的短脉冲激光输出。该技术适用于任何其它准分子器件。     

Complete and Nondestructive Atomic Bell‐State Analysis Assisted by Inverse Engineering

A protocol for complete and nondestructive atomic Bell‐state analysis by using inverse engineering is presented. The setups for the Bell‐state analysis contain four atoms trapped in four separated cavities, respectively. The laser pulses designed by inverse engineering help in the manipulation of the transitions of atoms in a robust manner. By using the protocol, the information for distinguishing four Bell states of two information‐carrying atoms is encoded on two auxiliary atoms. Therefore, the four Bell states can be distinguished without being destroyed by detecting the states of the two auxiliary atoms. Moreover, as shown by the numerical simulations, the protocol has high successful probabilities to distinguish four Bell states when decoherence is considered. Thus, the protocol may provide some helpful perspectives for the quantum information tasks based on Bell states.     

Forced convection heat transfer from porous heat sinks placed in partially open cavity: Some case studies

In this present study, the forced convection heat transfer from aluminum foam heat sinks with 10, 20, 40 PPI pore density placed in a discrete form in a partially open cavity were experimentally investigated. Air was used as working fluid. The uniform heat flux was applied to 3 × 3 array of foam heat sinks horizontally mounted in the cavity. The experimental studies were performed for the 3363–9743 range of Reynolds number and the 2.7 x 10⁶ and 7.5 x 10⁶ range of modified Grashof number. The effects of the Reynolds number, the modified Grashof number and the pore density of foam heat sink on the heat transfer were investigated. The results obtained were compared with the results obtained without foam heat sink cases. In addition, the most heated elements within the cavity were identified and solution proposals were presented. In addition, the most heated elements within the cavity were identified and solution proposals were presented.     

利用法布里-珀罗腔抑制电光相位调制中的剩余幅度调制

激光经电光相位调制后,由于剩余幅度调制的存在造成调制边带幅度不相等。利用法布里-珀罗腔的透射特性和Pound-Drever-Hall技术对通过法布里-珀罗腔的调制光正、负一级边带的幅度产生不同的衰减,使得调制边带的幅度相等,从而实现对电光相位调制中剩余幅度调制的抑制。采用该方法,理论上计算了调制光经法布里-珀罗腔后的光外差光谱信号,获得锁定法布里-珀罗腔后调制边带幅度的不对称度较腔锁定前减小四个数量级。实验研究了调制光经法布里-珀罗腔透射的光外差光谱,结果表明将法布里-珀罗腔锁定于该透射光外差光谱中心零位时,对剩余幅度调制的抑制程度可达45 dB。     

光子晶体垂直腔面发射850nm波长激光器研究

文章报道了国内首次研制成功的光子晶体垂直腔面发射850nm波长激光器, 实现了连续电注入激射.发现器件能否激射直接依赖于光子晶体结构参数,而激光器的阈值、输出功率、输出模式等与光子晶体的晶格常数、占空比、腔的大小等因素有关.     

J-C模型和原子-腔光力学系统中的纠缠交换

基于Jaynes-Cummings模型和原子-腔光力学系统,研究了该系统中原子与机械模之间的纠缠交换机制,讨论了两个原子的相干角和腔场与机械模之间的耦合系数对原子与机械模之间纠缠的影响。一个原子与机械模之间的最大纠缠随着该原子相干角的增大而减小,另一个原子与机械模之间的纠缠存在突然产生和突然死亡现象,并且最大纠缠随该原子相干角的增大而增大。根据这一结果可以制备原子与机械模之间的最大纠缠态,这为纠缠调控提供了一种新的方式。     

一个传送原子纠缠态的新方案

本文提出一个通过原子和腔场相互作用传送未知原子纠缠态的新方案,并且成功概率为100%.在这个方案里,我们主要利用两个原子用来接受被传送的原子纠缠态以及一个双模腔作为量子通道.由于腔场的两个模具有不同的频率和正交极化,因此这两个模能够被区分,并且处于腔场的不同区域.原子和腔场通过J-C哈密顿量发生共振相互作用,当原子和其中一个模相互作用时,另外一个模不受影响.该方案既不需要贝尔态测量,也不需要任何操作重构纠缠初态.这个方案也可以推广到传送N个原子的纠缠态.     

Analysis of superconducting cavity quench events at SSRF

Quench is important and dangerous to superconducting RF cavities. This paper illustrates the mechanism of quench and how a quench detector works, and analyzes the quench events happening during beam operations and cavity conditioning. We find that the quench protection is mostly triggered by some reasons such as fluctuation of cavity voltage, multipacting or arc, rather than a real cavity thermal breakdown. The results will be beneficial to optimize the operation parameters of superconducting cavities, to discover the real reasons for beam trip by quench interlock, and to improve the operation stability of superconducting RF systems.     

V型原子与光场拉曼相互作用传送未知原子态

未知量子态从一个地方到另一个地方的隐形传送在量子信息领域中有非常重要的作用,提出了一种利用简并V型三能级原子与振幅很大的单模相干态腔场的拉曼相互作用来传送未知原子态的方案。     

微微秒叶绿素染料激光器的研究

本文报道用一台对撞脉冲锁模Nd:YAG激光器的三倍频光作为泵浦光源,采用超短腔结构,获得叶绿素的红色ps脉冲激光输出的装置和实验结果。研究了叶绿素a和b在各种聚合状态下输出激光波长随染料浓度的变化关系,当叶绿素a-乙醇溶液浓度为2×10~(-3)M,激光腔长<36μm时可获得单模调谐ps系列脉冲输出,激光束的发散角≈60mrad。