Relativistic many-body theory with radioactive ion beams: Surface pion condensation

We critically review the present relativistic mean-field theory from the viewpoint of missing pions. We introduce the interesting experimental data on pionic states taken at RCNP. These data seem to suggest the occurrence of pion condensation in the nuclear surface. Qualitative discussion is made on the consequence of surface pion condensation on Gamow-Teller transitions and spin response functions and others. The radioactive ion beams are the tools of studying the unstable nuclei, which have extended nuclear surfaces. We shall start with radioactive ion beams the nuclear surface science, which includes the surface pion condensation as the important ingredient in addition to spin-orbit splitting and surface pairing. Received: 1 May 2001 / Accepted: 4 December 2001     

Ultrasound-assisted extraction and properties of polysaccharide from Ginkgo biloba leaves

Response surface methodology (RSM) was used to optimize the ultrasound-assisted extraction conditions of Ginkgo biloba leaves polysaccharide (GBLP). The optimum extraction conditions for the ultrasound-assisted extraction of GBLP were obtained as liquid to material ratio of 30 mL/g, ultrasonic power of 340 W, and extraction time of 50 min. Under these conditions, the yield of GBLP was 5.37 %. Two chemically modified polysaccharides, CM-GBLP and Ac-GBLP, were obtained by carboxymethylation and acetylation of GBLP. The physicochemical properties of these three polysaccharides were comparatively studied and their in vitro antioxidant activities were evaluated comprehensively. The results showed that the solubility of the chemically modified polysaccharides was significantly enhanced and the in vitro antioxidant activity was somewhat improved. This suggests that carboxymethylation and acetylation are effective methods to enhance polysaccharide properties, but the results exhibited some uncontrollability. At the same time, GBLP has also shown high potential for research and application.     

新型低共熔溶剂的制备、表征及物性研究

以氯化1-丁基-3-甲基咪唑鎓([Bmim]Cl)和二元羧酸为原料,由不同摩尔比混合制备了一类新型低共熔溶剂,采用红外光谱对[Bmim]Cl和二元羧酸之间的作用进行了分析。分别测定了其粘度、电导率、密度、折射率等物理性质,并研究了温度、二元羧酸结构和摩尔比对这些物理性质的影响。结果表明,新型低共熔溶剂的粘度随温度的升高而降低,电导率随温度的升高而增加。温度对两者的影响可以采用VTF方程进行精确地拟合。新型低共熔溶剂的密度随温度的升高而呈线性下降。对新型低共熔溶剂的过量摩尔体积进行计算的结果表明,过量摩尔体积均为正值,二元羧酸对过量摩尔体积的贡献远大于[BMIM]Cl,而结构特性的贡献多于物理作用。折射率和密度随二元羧酸碳数的变化趋势基本相似。     

呋喃基聚酯的结构与性能关系研究进展

呋喃基聚酯是指以2,5-呋喃二甲酸(FDCA)为主要单体合成的生物基或部分生物基高分子,其主链含有刚性的呋喃环,因而在结构、性能上与大规模使用的传统石油基芳香族聚酯(如PET、PBT)相似,有望在瓶、片、薄膜、化纤等领域部分替代后者。本文综述了呋喃基聚酯的分子结构、聚集态结构以及力学、气体阻隔、降解等性能方面的最新研究进展,讨论了结构与性能之间的关系。重点关注呋喃基聚酯突出的阻隔性能及其对应的影响因素,主要从分子结构(呋喃环的非对称性和极性)和聚集态结构(结晶等)两方面加以阐明。简介了呋喃基聚酯的发展现状及其在包装、纺织等领域的潜在应用,并展望其主要研究趋势。     

Microbial synthesis of gold nanoparticles: Current status and future prospects

Gold nanoparticles have been employed in biomedicine since the last decade because of their unique optical, electrical and photothermal properties. Present review discusses the microbial synthesis, properties and biomedical applications of gold nanoparticles. Different microbial synthesis strategies used so far for obtaining better yield and stability have been described. It also includes different methods used for the characterization and analysis of gold nanoparticles, viz. UV–visible spectroscopy, Fourier transform infrared spectroscopy, X ray diffraction spectroscopy, scanning electron microscopy, ransmission electron microscopy, atomic force microscopy, electron dispersive X ray, X ray photoelectron spectroscopy and cyclic voltametry. The different mechanisms involved in microbial synthesis of gold nanoparticles have been discussed. The information related to applications of microbially synthesized gold nanoparticles and patents on microbial synthesis of gold nanoparticles has been summarized.     

Preparation and characterization of modified graphite oxide/poly(propylene carbonate) composites by solution intercalation

Modified graphite oxide (MGO)/Poly (propylene carbonate) (PPC) composites with excellent thermal and mechanical properties have been prepared via a facile solution intercalation method. An intercalated structure of MGO/PPC composites was confirmed by X-ray diffraction and scanning electron microscope. The thermal and mechanical properties of MGO/PPC composites were investigated by thermal gravimetric analysis, differential scanning calorimetric, dynamic mechanical analysis, and electronic tensile tester. Due to the nanometer-sized dispersion of layered graphite in PPC matrix and the strong interfacial interaction between MGO and PPC, the prepared MGO/PPC composites exhibit improved thermal and mechanical properties in comparison with pure PPC. Compared with pure PPC, the MGO/PPC composites show the highest thermal stability and the T_g is 13.8 °C higher than that of pure PPC, while the tensile strength (29.51 MPa) shows about 2 times higher than that of pure PPC when only 3.0 wt.% MGO is incorporated. These results indicate that this approach is an efficient method to improve the properties of PPC.     

Effect of High Pressure on the Consumer Liking and Preference of Yoghurt

One hundred consumers evaluated three types of set yoghurt made from: 100% pressure treated milk (PTM; 600 MPa for 15 min), 100% heat treated milk (HTM; 85 °C for 20 min) and a mixture containing 10% PTM and 90% HTM. There was no significant difference between appearance liking or texture liking of the three yoghurt types, though the texture score of PTM yoghurt and mixed milk yoghurt were both higher than HTM yoghurt. Creaminess score for PTM yoghurt was significantly higher than for HTM yoghurt; mixed milk yoghurt was significantly different from HTM yoghurt but not from PTM yoghurt. Concerning taste liking, PTM yoghurt scored significantly less than mixed milk yoghurt, with HTM yoghurt between these two. 57% of consumers preferred the HTM to PTM yoghurt, giving taste as their main criteria; those preferring PTM yoghurt based their choice on texture. Rheological assessments showed differences in gel structure, which justify consumer texture and creaminess choices.     

Ti和Al共掺杂ZnS的电子结构和光学性质

基于密度泛函理论的第一性原理研究Ti和Al单掺杂和(Ti,Al)共掺杂ZnS的能带结构、电子态密度分布、介电函数、光学吸收系数,分析了掺杂后电子结构与光学性质的变化.计算结果表明:掺杂后禁带中引入了新的杂质能级,费米能级进入导带.掺杂改变了ZnS晶体的导电特性,使它表现出金属特性,导电性能增强;与纯净ZnS相比,Ti单掺杂和(Ti,Al)共掺杂ZnS的吸收边均出现明显的红移,且在1.79eV左右出现了一个新峰;而Al单掺杂ZnS的吸收边则发生明显的蓝移,且不产生新的吸收峰.     

MCSCF calculation of response properties of Argon

Summary Analytic equations of the multiconfigurational SCF (MCSCF) response theory are combined with the finite-field (FF) approach to compute static and frequency dependent electric and magnetic properties of the Argon atom. A complete active space (CAS SCF) function including the 3s, 3p, 3d, 4s and 4p orbitals in the active space and a large (17s 13p 7d 5f 3g) basis set are employed. This permits an accurate determination of various linear and non-linear response properties such as e.g. electric dipole polarisability and second hyperpolarisability, Verdet constant, magnetisability and second hyperpolarisability. The results, both for the static values and for the frequency dependence of these properties, compare well with other most recent experimental and theoretical data.Dedicated to Jan Linderberg on the occasion of his 60th birthday     

半导体激光系统的特殊设计

根据半导体激光器远场光束呈椭圆斑,输出功率、光谱特性、寿命、温度以及输出具有偏振性等光学特性,本文讨论了半导体激光系统的特殊设计问题。着重研讨半导体激光器输出功率的稳定,椭圆光束的准直和整圆等。