Investigation of the performance of bipolar transverse plate ESP in the sintering flue control

In order to improve the particle collection efficiency of the electrostatic precipitator (ESP), a transverse plate ESP with bipolar discharge electrodes is proposed. The simulations of the velocity distribution have shown that when the inlet velocity is 1 m/s, within the range of 40 mm from electrode plate, the average velocities of windward side and leeward side are less than 0.7 m/s and 0.3 m/s respectively. It is clear that the velocity near the collection electrode plate of this bipolar ESP is much lower than that of the ordinary ESP at the same inlet velocity. This low velocity can lead to higher efficiency for fine dust collection due to the less dust re-entrainment in ESP. It is also found that the average velocities are getting lower when the distance between plates electrodes are greater than 150 mm in accordance with the simulations. The voltage current characteristics of the bipolar ESP are superior to the ordinary ESP. The pressure drop of the bipolar ESP is about 30% higher than that of the ordinary one. The dust penetration of the bipolar ESP is about 54% less than that of the ordinary ESP when the sintering dust with 25.405 μm mass median diameter is used as the test particulate under the condition of the electric field from 2.1 kV/cm to 3.2 kV/cm and the velocity from 1.0 m/s to 1.5 m/s.     

一种车用单刀双掷开关的质检仪器研发

介绍了一种车用单刀双掷开关质量检测仪器的研发,包括检测系统的硬件设计、检测原理以及算法软件开发。首先,根据单刀双掷开关的工作原理及质量检测要求,开发了检测手指触觉压力的机械装置,以及控制开关通道切换的继电器控制电路;在此基础上,开发了相应的检测算法,可实现对开关切换状态、电压差以及手指触觉压力进行自动化的数据采集、分析、检测和判断,从而挑选出合格的开关;最后,设计了触屏人机交互界面,可实时显示产品检测的参数。该检测设备在某自动化生产线上经过近一年时间的检测验证,证明系统运行平稳,检测效果良好、误检率低,可以完全取代传统的人工检测方式,提高了开关的检测效率,降低了检测人员的工作量。     

环氧灌浆材料在莞惠城际轨道工程GZH-5标渗漏水治理中的应用

针对当前聚氨酯灌浆材料在渗漏水治理中存在的问题,提出了依靠堵水环氧灌浆材料和高渗透环氧灌浆材料进行渗漏水治理的新思路。环氧类灌浆材料既能够对混凝土裂缝等缺陷进行修复,也能够封堵渗漏水,希望修复后的缺陷能够保持和恢复混凝土结构的耐久性。     

Charge Transfer and Metastable Ion Dissociation of Multiply Charged Molecular Cations Observed by Using Reflectron Time-of-Flight Mass Spectrometry

A multiply charged molecule expands the range of a mass window and is utilized as a precursor to provide rich sequence coverage; however, reflectron time-of-flight mass spectrometer has not been well applied to the product ion analysis of multiply charged precursor ions. Here, we demonstrate that the range of the mass-to-charge ratio of measurable product ions is limited in the cases of multiply charged precursor ions. We choose C₆F₆ as a model molecule to investigate the reactions of multiply charged molecular cations formed in intense femtosecond laser fields. Measurements of the time-of-flight spectrum of C₆F₆ by changing the potential applied to the reflectron, combined with simulation of the ion trajectory, can identify the species detected behind the reflectron as the neutral species and/or ions formed by the collisional charge transfer. Moreover, the metastable ion dissociations of doubly and triply charged C₆F₆ are identified. The detection of product ions in this manner can diminish interference by the precursor ion. Moreover, it does not need precursor ion separation before product ion analysis. These advantages would expand the capability of mass spectrometry to obtain information about metastable ion dissociation of multiply charged species.     

Experimental investigation on the distribution uniformity and pressure drop of perforated plate distributors for the innovative spray-type packed bed thermal storage

As an innovative thermal energy technology, the spray-type packed bed has advantages of high efficiency and low cost. A liquid distributor is the key component for the spray-type packed bed for scattering heat-transfer liquid drops evenly. In this study, the distribution performance and pressure drop of the perforated plate distributors of different orifice diameters were studied experimentally. The experimental results indicate that orifice diameter has a greater effect on the distribution performance compared to flow rate. With an increase in flow rate, the flow pattern through the distributor changes from the uncovered drop to the covered drop and then to the jet flow. The covered drop pattern shows the best performance with a good distribution and a small pressure drop simultaneously, which is the design and optimization principle of the distributor for a spray-type packed bed.     

Pressure Effects on Thermodynamics of Phase Behavior in Polystyrene/Methylcyclohexane Solutions

The calculations presented in this paper are based on the Sanchez-Lacombe(SL)lattice fluid theory.The interaction energy parameter,g12/k,required in this approach was obtained by fitting the cloud points of polystyrene(PS)/methylcyclohexane(MCH)polymer solutions under pressure.The SL lattice fluid theory was used to calculate the spinodals,the binodals,and the Flory-Huggins(FH)interaction parameter of the solutions.The calculated results show that the SL lattice fluid theory can describe the dependences of thermodynamics of PS/MCH solutions on temperature and pressure very well.However,the calculated enthalpy and the excess volume changes indicate that the Clausius-Clapeyron equation cannot be suitable to describe pressure effect on PS/MCH solutions.Further analysis on the thermodynamics of this system under pressure shows that the role of entropy is more important than the excess volume in the present case.     

PIV水下流场测试系统试验研究

基于粒子图像测速技术,设计研制了一套适用于水洞洞体内高速、封闭试验条件的流场测量与显示设备.该系统由光源、成像、图像处理与分析、控制和粒子投放等分系统组成,具有复杂环境下全流场的无接触、无扰动、高准确度测量和显示能力,流场测试误差小于2%,可为水下航行器外形设计及其改进提供相关的实测数据.     

大范围光纤Bragg光栅压力传感器增敏实验研究

鉴于钛合金材料具有低弹性模量、受温度影响小等特性,设计制作了一种以钛合金管作为光纤Bragg光栅应变增敏衬底元件的高压压力传感器件.通过与电阻应变计实时监控的对比,从实验上研究了光纤Bragg光栅的中心波长偏移对调谐压强的响应.结果表明:这种增敏设计,具有良好的线性响应和可重复性,且与理论推导结果吻合较好.增敏后对压力的响应灵敏度可达0.034 nm/MPa,测压量程可达0~40 MPa,甚至更宽.     

基于风洞试验的不同坡度多跨锯齿屋面风压特性研究

多跨锯齿屋面因其具有跨度大、结构轻盈的特点成为典型的风灾易损结构.目前国内规范对锯齿屋盖的风荷载规定较为粗略,简单给定了统一的风压系数参考值,在实际工程应用中具有一定的局限性.本文以某4跨锯齿房屋为研究对象,通过风洞试验测试了15°、21°、26°、30°和40°等5种不同屋面坡度对锯齿屋盖风压特性的影响.试验结果表明...     

波纹板式空冷器阻力与传热特性实验研究

在可改变风量和热水流量的实验条件下,对波纹板式空冷器的阻力与传热特性进行实验研究。得到了空气侧的阻力降关联式以及两侧的对流换热系数关联式,其适用于热水雷诺数在2000-8000之间、空气雷诺数在2000-10000之间。在相同工况下,比较了波纹板式、光管式和翅片管式空冷器的性能指标,结果表明:迎面风速在2.45-4.1 m/s之间,波纹板式空冷器传热系数达到100-160 W/m2/℃;约比光管式提高70%,但只有以管束外表面为基准的翅片管式传热系数的六分之一;板式空冷器单位体积换热量约是翅片管式空冷器的1.5倍,是光管式的15倍;板式空冷器单位功耗换热量约是光管式空冷器的5.5倍,而翅片管式空冷器与光管式空冷器则相差不大。