Hardness and slip systems of orthorhombic hen egg-white lysozyme crystals

Hardness and slip systems by an indentation method were investigated on different habit planes of orthorhombic hen egg-white lysozyme (O-HEWL) crystals containing water. A dependence of the hardness on the water-evaporation time exhibits three stages as incubation, transition and saturated ones, as tetragonal (T)-HEWL crystals reported previously. The hardness values of (1 1 0), (0 1 0) and (0 1 1) habit planes of O-HEWL in the incubation stage or wet condition exhibits 6, 8 and 10 MPa, respectively. The hardness depends on indented planes but it is independent of the air-humidity and crystal volumes. These values correspond to the intrinsic hardness for O-HEWL crystals containing water. In the incubation stage, the slip traces are clearly observed around the indentation mark and the corresponding six kinds of slip systems are identified to be {0 1 1}<1 0 0>, {1 1 0}<1 1 0>, {0 1 1}<0 1 1>, {1 1 0}<0 0 1>, {1 0 0}<0 0 1> and {0 1 0}<0 0 1>.     

Kr/Xe气体在塑料闪烁体表面的吸附与扩散行为研究

采用基于Compass力场的分子动力学(MD)方法,研究了惰性气体氙(Xe)和氪(Kr)在塑料闪烁体(聚乙烯基对甲苯)的平整和粗糙表面的吸附和扩散行为.由惰性气体吸附曲线的均方根位移(MSD),得到了Xe/Kr气体在聚乙烯基对甲苯表面的扩散系数.研究结果表明,Kr/Xe气体均被稳定地吸附在塑料闪烁体表面,其稳定性随着温度的升高而增加,Xe分子的吸附性强于Kr分子. Kr/Xe气体在聚乙烯基对甲苯表面具有较强的扩散性能,扩散深度随着温度与厚度的增加而增加,最大为22.865?,Kr分子扩散能力强于Xe分子.基底粗糙表面增加了两种惰性气体分子的吸附和扩散.     

高聚物PMMA的受力变形行为与粘弹－塑性本构理论模型

对高聚物ＰＭＭＡ实验测定了不同（Ｔ，ε）的单轴加卸载循环的应力－应变曲线。讨论了应力促进热激活塑性变形的活化粘壶理论和塑性变形的发展规律。提出由ＳＬＳ或ＭＳ与活化粘壶作串联耦合的粘弹－塑性本构理论模型，给出了微分和积分形式的本构方程组，用于拟合求解加卸载循环的应力－应变曲线，获得良好吻合的结果。详细讨论了ＰＭＭＡ在加载过程中的受力变形行为，包括起始加载的粘弹性变形，ε＿ｖ和ε＿ｐ的互相挤占，屈服点，以及屈服后应变软化和硬化的抗衡过程。对应变软化－硬化效应提出一种新的起因于粘弹变形内禀滞后效应的理论解释，并定名为粘弹软化－强化效应。对所包含的粘弹变形成分，从Ｅ＿ｖ的移位因子和归一化应力－应变主曲线两方面，讨论了可能存在的率温等效关系。     

Estimation on the optic loss for acrylic polymers by theoretical modification

Various fluorinated/chlorinated polymers were synthesized and characterized by FT-IR and NMR. Also, theoretical optic loss of the POF were investigated and proposed for the purpose of finding a definite rule of the optic loss.From the computation of the results, the modified equation was theoretically deduced, and the optic loss of each prepared polymer was measured and compared with the calculated optical loss of polymers. Also, it was found that the optic loss from the modified equation fitted well with the experimental data.     

激光烧蚀-电感耦合等离子体质谱法测定塑料中的Pb、Cd、Cr和Hg

采用激光烧蚀固体进样技术的电感耦合等离子体质谱法(LA-ICP-MS)测定了塑料中的Pb、Cd、Cr和Hg。选择了线扫描激光烧蚀方式,并从灵敏度和稳定性角度优化了工作参数。根据计算分馏因子考察了分馏效应,结果表明,所测元素分馏效应小。塑料中Hg的记忆效应严重,认为主要来自样品表面吸附,减小样品的表面积可减小Hg的记忆效应。以聚丙烯标准物质及其空白片作校准曲线,应用于ABS、PPS、PA66+30%GF、PVC、PTFE等实际塑料样品的测定,测定结果与ICP-OES(XRF)法测定值基本吻合。Pb、Cd、Cr和Hg的检测下限分别为0.002、0.001、0.08和1.5 mg/kg。     

Surface structure monitoring with plastic optical fiber

A sensor was designed using a plastic optical fiber to study the potential of detecting structural deformities and corrosion of metallic surfaces, in particular for applications in constricted areas such as pipes. The principle of the sensor is based on the collection of scattered light reflected by the surface imperfections. Several types of metallic materials in various surface profiles and stages of corrosion have been studied. The sensor was able to determine the position of ridges on the surface and corroded regions in all cases evaluated in the study. A sensitivity of 100 mV/mm was detectable for proximity and a vertical resolution of 1 mm has been measured.     

Calculation of the frequency response in step-index plastic optical fibers using the time-dependent power flow equation

The time-dependent power flow equation, which is reduced to its time-independent counterpart is employed to calculate frequency response and bandwidth in addition to mode coupling and mode-dependent attenuation in a step-index plastic optical fiber. The frequency response is specified as a function of distance from the input fiber end. This is compared to reported measurements. Mode-dependent attenuation and mode dispersion and coupling are known to be strong in plastic optical fibers, leading to major implications for their frequency response in data transmission systems.     

Toughness and failure of heat resistant steel before and after hydrogenation

Fracture toughness of heat-resistant steel can be increased by a preliminary thermomechanical loading called warm pre-stressing (WPS). The procedure creates a plastic deformed area around the crack tip and hence allows larger service loads to be tolerated by the cracked specimen. It is shown that a hydrogenation in the preloading stage decreases the fracture toughness of material.Investigations are also presented of the applicability of physical and mechanical approaches for the prediction of cleavage stress of materials after preliminary plastic deformation (PPD) effects and hydrogenation. Different schemes of the plastic deformation and influence of hydrogenation are considered in the preloading stage to provide different levels cleavage stress of steel 15Kh2MFA.