HL-1装置脱离等离子体及边界等离子体杂质辐射的观测

首次用三道光纤探测器,伸入HL-1装置内真空室,采集活动石墨孔栏处等离子体光信号,用22m石英长光纤传输光信号至控制室进行观测。通过边界等离子体H_α和杂质辐射的时空分布,初步探讨了HL-1装置的脱离等离子体。     

基于CMOS图像传感器的成像系统设计

以OV 5 116CMOS图像传感器为例 ,讨论了基于CMOS图像传感器的成像系统的电路设计方法及系统设计中应注意的问题 ;并通过对CMOS图像传感器外围电路的优化设计实现了成像系统的微型化和轻量化。     

光纤微位移法测量固体线膨胀系数

本文绘出了一种金属固体线膨胀系数的测量方法,即采用光纤位移传感器的方法（光纤微位移法）来测量固体的线膨胀系数．测量了黄铜的线胀系数,分别用逐差法和线性回归法处理了实验数据,并与标准值进行了比较．     

Increase in the Intracellular Bulk Water Content in the Early Phase of Cell Death of Keratinocytes,Corneoptosis, as Revealed by 65 GHz Near-Field CMOS Dielectric Sensor

While bulk water and hydration water coexist in cells to support the expression of biological macromolecules, how the dynamics of water molecules, which have long been only a minor role in molecular biology research, relate to changes in cellular states such as cell death has hardly been explored so far due to the lack of evaluation techniques. In this study, we developed a high-precision measurement system that can discriminate bulk water content changes of ±0.02% (0.2 mg/cm³) with single-cell-level spatial resolution based on a near-field CMOS dielectric sensor operating at 65 GHz. We applied this system to evaluate the temporal changes in the bulk water content during the cell death process of keratinocytes, called corneoptosis, using isolated SG1 (first layer of stratum granulosum) cells in vitro. A significant irreversible increase in the bulk water content was observed approximately 1 h before membrane disruption during corneoptosis, which starts with cytoplasmic high Ca²⁺ signal. These findings suggest that the calcium flux may have a role in triggering the increase in the bulk water content in SG1 cells. Thus, our near-field CMOS dielectric sensor provides a valuable tool to dissect the involvement of water molecules in the various events that occur in the cell.     

High sensitivity dual core photonic crystal fiber sensor for simultaneous detection of two samples

The optical control ability of photonic crystal fiber (PCF) is a distinctive property suitable for improving sensing and plasma performance. This article proposes a dual-core D-channel PCF sensor that can detect two samples simultaneously, which effectively solves the problems of coating difficulty and low wavelength sensitivity. The PCF has four layers of air holes, which dramatically reduces the optical fiber loss and is more conducive to the application of sensors in actual production. In addition, by introducing dual cores on the upper and lower sides of the central air hole, reducing the spacing between the core and the gold nanolayer, a stronger evanescent field can be generated in the cladding air hole. The optical fiber sensor can detect the refractive index of two samples simultaneously with a maximum sensitivity of 21300 nm/RIU. To the best of our knowledge, the sensitivity achieved in this work is the highest sensitivity with the dual sample synchronous detection sensors. The detection range of the refraction index is 1.35-1.41, and the resolution of the sensor is 4.695×10^-6. Overall, the sensor will be suitable for medical detection, organic chemical sensing, analyte detection, and other fields.     

Sensitivity improvement of aluminum-based far-ultraviolet nearly guided-wave surface plasmon resonance sensor

An aluminum (Al) based nearly guided-wave surface plasmon resonance (NGWSPR) sensor is investigated in the far-ultraviolet (FUV) region. By simultaneously optimizing the thickness of Al and dielectric films, the sensitivity of the optimized Al-based FUV-NGWSPR sensor increases from 183°/RIU to 309°/RIU, and its figure of merit rises from 26.47 RIU^-1 to 32.59 RIU^-1 when the refractive index of dielectric increases from 2 to 5. Compared with a traditional FUV-SPR sensor without dielectric, the optimized FUV-NGWSPR sensor can realize simultaneous improvement of sensitivity and figure of merit. In addition, the FUV-NGWSPR sensor with realistic materials (diamond, Ta₂O₅, and GaN) is also investigated, and 137.84%, 52.70%, and 41.89% sensitivity improvements are achieved respectively. This work proposes a method for performance improvement of FUV-SPR sensors by exciting nearly guided-wave, and could be helpful for the high-performance SPR sensor in the short-wavelength region.     

Tunable and highly sensitive temperature sensor based on graphene photonic crystal fiber

Optical fiber temperature sensors have been widely employed in enormous areas ranging from electric power industry, medical treatment, ocean dynamics to aerospace. Recently, graphene optical fiber temperature sensors attract tremendous attention for their merits of simple structure and direct power detecting ability. However, these sensors based on transfer techniques still have limitations in the relatively low sensitivity or distortion of the transmission characteristics, due to the unsuitable Fermi level of graphene and the destruction of fiber structure, respectively. Here, we propose a tunable and highly sensitive temperature sensor based on graphene photonic crystal fiber (Gr-PCF) with the non-destructive integration of graphene into the holes of PCF. This hybrid structure promises the intact fiber structure and transmission mode, which efficiently enhances the temperature detection ability of graphene. From our simulation, we find that the temperature sensitivity can be electrically tuned over four orders of magnitude and achieve up to ～ 3.34×10^-3 dB/(cm·℃) when the graphene Fermi level is ～ 35 meV higher than half the incident photon energy. Additionally, this sensitivity can be further improved by ～ 10 times through optimizing the PCF structure (such as the fiber hole diameter) to enhance the light-matter interaction. Our results provide a new way for the design of the highly sensitive temperature sensors and broaden applications in all-fiber optoelectronic devices.     

磁致伸缩材料弱磁场响应特性的实验研究

针对磁致伸缩材料在弱磁场传感器领域的应用需要,采用迈克耳逊干涉原理实验测量了零应力条件下Tb-Dy-Fe材料和Fe-Ga合金的磁场响应灵敏度,以及不同应力下Fe-Ga合金的磁场响应特性和温度响应特性.实验结果表明：在零应力,外加磁场16 mT条件下,Fe-Ga合金的磁场响应灵敏度远高于Tb-Dy-Fe材料,更合适作为弱磁场传感器敏感材料;同时,在1.2 MPa预应力和26 mT偏置磁场下,Fe-Ga合金材料具有较好的磁场响应灵敏度和较大的饱和磁致伸缩系数,因而处在最佳工作状态.所得到的材料的磁场和温度响应曲线可作为弱磁场传感器参量设计的参考依据.     

干涉型光纤传感器相位生成载波解调方法改进与研究

提出了基于干涉型光纤传感器的相位生成载波解调方法（PGC）的改进方法,通过算法上的改进和增加抗混叠滤波器,有效地改善了解调结果,并大大降低了系统的采样频率,结论对设计干涉型光纤传感器解调系统有重要的参考意义