Thermally stimulated current and DSC studies of the broadened glass transition in liquid crystalline polymers

The high sensitivity of the thermally stimulated current, thermal sampling (TS) method is emphasized in a study of the breadth of the glass transition in several liquid-crystalline polymers (LCPs). Differential scanning calorimetry (DSC) was performed on all samples to further quantify the glass transition regions. For “random” copolyester LCPs with widely varying degrees of crystallinity, including highly amorphous samples, very broad glass tran-sition regions were observed. One semicrystalline alternating copolyester and a series of semicrystalline azomethine LCPs were studied as examples of structurally regular polymers. These exhibited relatively sharp glass transitions more comparable to ordinary isotropic amorphous or semicrystalline polymers. The broad glass transitions in the random copolyesters are attributed to structural heterogeneity of the chains. In one example of a moderate-crystallinity random copolyester LCP (Vectra), glass transitions ranging up to ca. 150°C in breadth were determined by the thermal sampling (TS) method and DSC. In other lower crystallinity copolyester LCPs, the main glass transition temperature as determined by DSC was comparable to that determined by TSC although cooperative relaxations of a minor fraction of the overall relaxing species were detected well below the main T_g, by the TS method and not by DSC. Rapid quenches from the isotropic melt to an isotropic glass were possible with one LCP. The anisotropic and isotropic glassy states for this LCP were found to have the same breadth of the glass transition as was determined by the TS method, although TSC and DSC show that T_g is shifted downward by ca. 15°C in the anisotropic glass as compared to the isotropic glass. © 1993 John Wiley & Sons, Inc.     

Density functional theory investigation of CN on Cu(1 1 1), Ni(1 1 1) and Ni(1 0 0)

The adsorption of CN on Cu(1 1 1), Ni(1 1 1) and Ni(1 0 0) has been investigated using density functional theory (DFT). While experimental studies of CN on Cu(1 1 1) show the molecular axis to be essentially parallel to the surface, the normally-preferred DFT approach using the generalised gradient approximation (GGA) yields a lowest energy configuration with the C-N axis perpendicular to the surface, although calculations using the local density approximation (LDA) do indicate that the experimental geometry is energetically favoured. The same conclusions are found for CN on Ni(1 1 1); on both surfaces bonding through the N atom is always unfavourable, in contrast to some earlier published results of ab initio calculations for Ni(1 1 1)/CN and Ni(1 0 0)/CN. The different predictions of the GGA and LDA approaches may lie in subtly different relative energies of the CN 5σ and 1π orbitals, a situation somewhat similar to that for CO adsorbed on Pt(1 1 1) which has proved challenging for DFT calculations. On Ni(1 0 0) GGA calculations favour a lying-down species in a hollow site in a geometry rather similar to that found experimentally and in GGA calculations for CN on Ni(1 1 0).     

MOCVD生长的GaN单晶膜透射光谱研究

采用MOCVD技术在Al2O3(0001)衬底上生长了GaN薄膜，使用透射光谱、光致发光光谱和X射线双晶衍射三种技术测试了五类GaN薄膜样品，实验结果表明：GaN薄膜透射谱反映出的GaN质量与X射线双晶衍射测量的结果一致，即透射率越大，半高宽越小，结晶质量越好；而X射线双晶衍射峰半高宽最小的样品，其PL谱的带边峰却很弱，这说明PL谱反映样品的光学性能与X射线双晶衍射获得的结晶质量不存在简单的对应关系，同时还报导了一种特殊工艺生长的高阻GaN样品的RBS／沟道结果。     

Liquid crystal lens with focus movable in focal plane

A liquid crystal lens with focus movable in the focal plane is reported. There are three electrodes in the cell. One electrode with a hole in the center is divided into four subelectrodes. The potential of each subelectrode is adjusted to produce a desired asymmetrical phase transformation resulting in off-axis movement of the focus. The potential of another electrode is adjusted to maintain the focus in the focal plane. Movements of the focus in three directions in the focal plane are demonstrated experimentally, and off-axis movement as large as approximately 800 μm is realized.     

Electro-optical performance of polymer stabilized cholesteric texture cell: The influence of chiral dopant and monomer concentration

Reverse-mode polymer stabilized cholesteric texture (PSCT) cells with various chiral dopant and monomer concentrations were fabricated. Experimental results indicate that the chiral dopant concentration and the monomer concentration significantly influence the threshold voltage and hysteresis of the cells. The chiral dopant and monomer deform the hysteresis loop. Increasing the monomer concentration reduces the width of the hysteresis loop of the reverse-mode PSCT cell.     

In‐line monitoring of UV photopolymerization with a quartz crystal resonator

An in‐line monitoring device using a quartz crystal resonator for thin film polymerization was proposed, and its performance has been evaluated by implementing in the UV polymerization of 2‐hydroxyethyl methacrylate with a photoinitiator of 1‐chloroanthraquinone. Because the variation of resonant resistance of the resonator is proportional to the square root of viscosity change that is closely related to the polymerization degree, the resistance can be used as a measure of the polymerization degree. The resistance measurements were compared with the outcome of instrumental analyses of polymerization degree using an FTIR spectrometer and a gel permeation chromatograph. The experimental results showed that the resistance measurements were consistent with the experimental outcome of the instrumental analyses, and this indicates the effectiveness of the proposed device. Owing to the simplicity and availability of the resonator system, its wide utilization in the monitoring of a variety of film polymerization processes, including photoresistor application, is expected. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 2428–2439, 2006     

Crystal structure and morphology of phenyl‐capped tetraaniline in the leucoemeraldine oxidation state

A series of crystals of phenyl‐capped tetraaniline in the leucoemeraldine oxidation state were obtained at different isothermal temperatures and were observed directly under transmission electron microscope. The crystals obtained at higher temperatures exhibit more perfect structures than those obtained at lower temperatures. Both the lamella thickness and the crystal size increase with crystallization temperature. The tetraaniline is apt to form larger scale crystals under lower degree of supercooling. However, their crystal structures keep steady with the crystallization temperature. The tetramer was found to adopt a monoclinic lattice with unit cell parameter of a = 13.93 Å, b = 8.82 Å, c = 23.20 Å, and β = 95.03°, as determined using electron diffraction tilting method combined with wide‐angle X‐ray diffraction experiment. © 2006 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 44: 764–769, 2006     

应力对La0.83Sr0.17MnO3薄膜输运性能的影响

采用溶胶-凝胶方法在Si(111)上制备了LSMO(x=0.17)薄膜.研究了块体材料和不同厚度薄膜R -T曲线、红外光谱和X射线衍射.结果表明，LSMO薄膜属于正交晶体结构，薄膜取向与膜厚度 有关，当膜厚度为450nm或680nm时，主要取向〈200〉，而膜厚度为900nm时取向为〈020〉 ：根据离子对相互作用能和谐振子模型，得到了红外吸收与Mn—O—Mn键长和键角关系式，6 00cm^-1附近红外吸收与晶格常数b的变化有关；块体与薄膜的金属—绝缘体转变 温度(T_MI)存在较大差别，薄膜转变温度显著低于块体，并与厚度有一定关系. 认为是LSMO薄膜中的应力诱导了晶格常数变化，引起键角改变及JT效应是转变温度变化的主 要原因. 关键词： 单晶硅 晶格常数 金属—绝缘体转变温度 应力诱导     

热效应对光折变晶体两波耦合的特性影响的理论分析

用一种模型对两波耦合进行了分析，导出了强度相位的解析式，对影响两波耦合的参数进行了理论分析。分析了对ＢａＴｉＯ３光折变晶体的两波耦合的测量结果。     

Synthesis and Structural Characterization of Adduct [La(NO_3)_3·4H_2O]·2(BQEB)

Differentkindsofopenchaincrownethershavebeensynthesizedasthemodelcompoundsofionophoresandtheirinteractionswithsodium,potassiumandrareearthionshavealsobeenstudiedl'z.PanshowedCe(III)yieldedalf1complexwithl,8-bis(8'-quinolyloxy)-3,6-dioxaandtheCe(IIl)ioncoordinatedbothtoetheroxygenandquinolinenitrogenatoms3.TUmInleridentifiedtwolanthanidenitratecomplexeshavingastoichiometryof3:2(3RE:2L)'.InordertostUdythefunctionsofbothquinolineandbenzenering,introducedintothepolyetherchain,a1inearpolyether…