相变气凝胶的设计合成及其微环境调控性能研究

人体微环境调控可以通过材料本身性能的调控实现穿着凉爽舒适,对提高生活品质、减少碳排放具有重要价值.然而传统材料仅能单向地实现致冷或保温,同一材料实现致冷、保温双向功能,依然是本领域重要挑战和值得及时探索的方向.本文采用冷冻-解冻制备水凝胶与冷冻干燥技术,设计合成系列以聚乙烯醇和相变微胶囊为骨架的相变气凝胶.此类相变气凝...     

热重分析技术及其在高分子表征中的应用

热重分析技术(TGA)是在程序控制温度和设定气氛下表征材料受热过程中的质量随温度或时间变化的高精度研究工具,具有重复性好、灵敏度高和热过程控制精准等优点.近年来,TGA技术在高分子材料领域得到了广泛应用,促进了高分子材料热稳定性、组成分析以及热分解机理等材料细观热响应特性的深入研究.本文分别从热重分析基本原理、仪器校准...     

基于混酸回流制备碳点的中和过程

Carbon dots (C dots) are relatively novel carbon nanomaterials that have attracted significant interest due to their unique photoluminescence, good biocompatibility, and stability. The preparation methods of C dots was usually summarized into "top-down" and "bottom-up", and mixed acid reflux is a top-down strategy that can be used to synthesize C dots, during which neutralization is a necessary step that can significantly influence the properties and potential applications of the final product. Previously, this research area mainly focused on tuning the properties of C dots by changing the starting materials and/or varying the reaction conditions; the influence of the reagents used during neutralization has been largely ignored. As the previously reported C dots prepared by mixed acid reflux were obtained from different starting materials under varied conditions, a meaningful comparison is difficult. Herein, yellow-emitting C dots were prepared by mixed acid-refluxing a carbon-rich material derived from fullerene carbon soot. For the same batch of as-prepared C dots, the influences of four reagents, i.e., NaOH, Na₂CO₃, K₂CO₃, and NH₃·H₂O, during neutralization on the structures and photoluminescence of the resulting C dots were investigated in detail. The results of thermogravimetric analysis, Fourier transform infrared spectroscopy, and X-ray photoelectron spectroscopy clearly showed that the reagent used during neutralization can affect the degree of dissociation of the acidic functional groups on the C dots. This is further supported by examination of the C dot/surfactant mixtures where subtle changes in the phase behavior were observed. Structural changes of the C dots cause variations in their surface states, ultimately altering the optical characteristics, including UV-vis absorption and fluorescence. Among the treated C dots, the sample prepared with Na₂CO₃ showed the strongest emission under the same excitation wavelength, while that prepared with NH₃·H₂O exhibited a distinct red shift (~8 nm) in the emission curve. The results presented herein provide clear evidence that neutralization reagent selection is important for optimizing the properties of the resulting C dots obtained by mixed acid reflux. In addition, the photoluminescence of the C dots can be influenced by their counterions, providing a novel method for tuning the properties of C dots while explaining their behavior in saline solutions. In short, the basicity of the neutralizing reagent and the type of counterions affect the structure of the C dots surface, which brings different performances. This work reminds researchers that it is necessary to use the type of neutralizing reagent as an experimental condition when preparing C dots in the future.     

Synthesis and characterization of fluorine functionalized graphene oxide dispersed quinoline-based polyimide composites having low-k and UV shielding properties

Polyimide nanocomposites having low-k and UV shielding properties have been developed using fluorine functionalized graphene oxide and bis(quinoline amine) based polyimide. The polyimide was synthesized using bis(quinoline amine) and pyromellitic dianhydride at appropriate experimental conditions, and its molecular structure was confirmed through various spectral analysis such as FTIR and NMR. The polyimide (PI) composites were prepared using bis(quinoline amine), pyromellitic dianhydride, and separately filled with 1, 5, 10 wt% of fluorinated graphene oxide (FGO) through in situ polymerization. The polymer composites were characterized using thermo gravimetric analysis (TGA), X-ray powder diffraction (XRD), and scanning electron microscopy (SEM). In addition, the water contact angle, dielectric behavior, and UV–Vis shielding behavior of FGO/PI composites were evaluated. The value of the water contact angle of the polyimide was increased with increment of FGO in the polyimide matrix. The highest water contact angle of polyimide composites observed 108° was obtained for 15 wt% FGO reinforced polyimide composite. The value of the dielectric constant for neat, 1, 5, and 15 wt% FGO reinforced polyimide composites was obtained as 4.5, 3.7, 2.6, and 2.0, respectively. It is also observed from by UV–Vis spectroscopy analysis that the FGO reinforced polyimide composites have good UV shielding behavior.     

Effect of hydration andpH on the thermal stability of proteinase K

The effect of hydration andpH on the thermal stability of proteinase K was studied in the temperature range 310–450 K by differential scanning calorimetry. The dependences of the denaturation temperatureT _d, the specific enthalpy of denaturation H _d and the maximum of excess apparent specific heat capacityC _ex ^max upon the degree of hydrationh and thepH of the buffers used are presented. The relation betweenT _d andh is of the Flory-Garrett's type. By means of Ooi's model, the two components of the denaturation enthalpy arising from hydration and conformational change, respectively, were estimated. The fact that the specific denaturation enthalpy of proteinase K is very low may be attributed to its very low enthalpy of conformational change per heavy atom.Dedicated to Prof. Menachem Steinberg on the occasion of his 65th birthdayThis major project was supported by the National Natural Science Foundation of China.     

Prediction of Complexation Properties of Crown Ethers Using Computational Neural Networks

A computational neural network method was used for the prediction of stability constants of simple crown ether complexes. The essence of the method lies in the ability of a computer neural network to recognize the structure-property relationships in these host-guest systems. Testing of the computational method has demonstrated that stability constants of alkali metal cation (Na+, K+, Cs+)-crown ether complexes in methanol at 25 °C can be predicted with an average error of ±0.3 log K units based on the chemical structure of the crown ethers alone. The computer model was then used for the preliminary analysis of trends in the stabilities of the above complexes.     

Influence of Temperature and Time on the Stability of Silver in Silica Sol-Gel Glasses

The darkening of silica sol-gel glasses doped with 0.05 mol% silver was studied. Six sols were prepared from TEOS and silver nitrate. Different additives were used, to influence the chemical and physical states of silver: oxidizing or reducing agents (H₂O₂, As₂O₅), colloid stabilizer (sodium citrate) and network modifiers (Li₂O, CaO). Sols were gelified at 60°C and densified at 600°C. The samples without additives and those prepared with H₂O₂ at room temperature even if they were protected from light. With increased temperature, the darkening became samples were heated above, 400°C, reversible bleaching took place. This darkening-bleaching is of thermal nature (“thermochromic effect”) and seems to be determined by a reversible aggregation-disaggregation of tiny silver particles. The presence of sodium citrate, as an additive delayed the darkening effect and the presence of CaO delayed it even further. Lithium oxide inhibited it totally.     

Critical evaluation of gas standards based on hydrogen

Summary Six commercial hydrogen standards containing helium, oxygen, nitrogen, methane and carbon dioxide at trace levels were analyzed by gas chromatography, for periods up to 105 days. The concentrations, in the range of 0–120 μmol mol⁻¹, were stable (with the exception of oxygen) but often significantly different from the certified values provided by the suppliers, especially for helium, oxygen and nitrogen. Concurrently, some experiments were carried out to verify the stability of gas mixtures based on hydrogen stored in cylinders submitted to different chemical and physical treatments. The causes that led to the deviations observed, as well as the decreases in oxygen, are discussed. Presented at the 21^st ISC held in Stuttgart, Germany, 15^th–20^th September, 1996.     

Intrinsic thermal stability and quenching recovery of thin-film superconductors with thermal boundary resistance

The stability behaviour of a thin-film superconductor under a localized release of thermal disturbance is investigated. Two-dimensional conjugate film/substrate conduction equation with anisotropic thermal conductivity of the film, and Joule heat are employed to investigate effects of substrate and thermal properties on the intrinsic stability and quenching recovery. To consider the thermal boundary resistance between film and substrate, an interfacial-layer model (ILM) with very low diffusivity and an acoustic mismatch model (AMM) are employed. Results show that the thermal boundary resistance influences strongly the intrinsic stability. Thermal boundary resistance increases intrinsic stability if the thermal conductivity of the substrate or the disturbance energy is large. Higher Biot numbers and thermal conductivity ratios of film to substrate in longitudinal direction influence stability favorably. We demonstrate also that operation of a film/substrate system, such as YBCO/MgO, is either intrinsically stable or irrecoverably unstable.The authors wish to express their sincere appreciation to Dr. R. C. Chen for his invaluable advice and suggestions during the course of this paper. This research was supported by the National Science Council of the R. O. C. through grant NSC 83-0401-E-009-006. The computations were performed on the IBM ES/9000 at the National Center For High-Performance Computing.     

Investigation of pyrolysis kinetics of carboxymethyl hydroxypropyl sesbania gum

The thermal pyrolysis of carboxymethyl hydroxypropyl sesbania gum and hydroxypropyl sesbania gum in air and nitrogen atmospheres were studied in order to establish the thermal stability of carboxymethyl hydroxypropyl sesbania gum. The results indicate that the stability of carboxymethyl hydroxypropyl sesbania gum against pyrolysis is higher than that of hydroxypropyl sesbania gum. The main state of carboxymethyl hydroxypropyl sesbania gum and hydroxypropyl sesbania gum can be assigned as random noncrystalline.We express our thanks to Dr. Yaxiong Xie for his help in this work.