Multi-phase transformation kinetics of HSLA steels during continuous cooling: experiments and cellular automaton (CA) simulation

ABSTRACT

Kinetics of multiply ferrite/bainite phase transformation of HSLA steels is investigated by experiments and cellular automaton (CA) simulation. Peak-differentiation method to elucidate the sequential ferrite and bainite phase transformation individually, which is verified by the CA simulation. Such CA modelling executed using classic JMAK theory, but also gives an insight of microstructure evolution of the multi-phase transformation routine on different cooling rate. From that, it enables classic JMAK modelling to capture the detached phase transformation with different growth models and interface-migration mechanisms. Also, we find that the final phase constitution is sensitive to the cooling rate. With increasing the cooling rate, bainite sheaves nucleated at prior austenite boundaries and ferrite/austenite interfaces are significantly facilitated, which seriously inhibits the growth of prior ferrites. The scenario can be interpreted by the CA simulation and the influence of the cooling rate on sequential multi-phase transformation can be also obtained.     

Long-exposure far-field properties of the array of mutually-injected fiber lasers

In this paper, the long-exposure far-field properties of the array of mutually-injected fiber lasers are studied to understand the effect of the multiple phase-locked states on coherent beam combining of the array. It is found that the long-exposure far-field will degenerate into the superposition of the intensities of the elementary lasers when all the phase-locked states of the array are exported with the same probability. It means that the interference pattern will be greatly weakened in the long-exposure far-field because of the export of multiple phase-locked states of the array. This result implies that the multiple phase-locked states of the array go against coherent beam combining of the array, and only some of these phase-locked states should be exported. Then, the effects of the high-order phase-locked states on the far-field are discussed. The result suggests that only the in-phase state should be exported (i.e., all the other phase-locked states should be suppressed) in order to realize high-efficiency (> 80%) coherent beam combining when the number of the elementary lasers of the array is smaller than 19.     

Oxygen relaxation and phase transition in GdBaCo2O5 + δ oxide

Electrical conductivity, internal friction techniques and dilatometer have been used to investigate the oxygen relaxation, phase transition and thermal expansion behavior of GdBaCo₂O_5 + δ. The main electronic charge carriers in GdBaCo₂O_5 + δ are electronic holes, which could be assigned to the formation of Co⁴⁺. The oxygen exchange kinetics intensely depends on oxygen partial pressure and is also closely related to temperature. Both electrical conductivity and internal friction give rise to an abnormal at about 75 °C, which are related to the insulator-metal transition occurring in GdBaCo₂O_5 + δ. One large relaxation internal friction peak, due to the motion of oxygen within Gd-O plane, is also found in the oxide. The average thermal expansion coefficient (TEC) of GdBaCo₂O_5 + δ is about 21.4 × 10⁻⁶ K⁻¹ between 500 °C and 900 °C.     

Thermal stability of the cubic phase in Ba0.5Sr0.5Co0.8Fe0.2O3 - δ (BSCF)1

Ba_0.5Sr_0.5Co_0.8Fe_0.2O_3 - δ (BSCF) is a material with excellent oxygen ionic and electronic transport properties reported by many research groups. In its cubic phase, this mixed ionic-electronic conducting (MIEC) perovskite is a promising candidate for oxygen permeation membranes. For this application, its long-term stability under operating conditions (especially temperature and oxygen partial pressure) is of crucial importance.The present work is focused on the thermal stability of the BSCF cubic phase in the targeted temperature range for applications (700…900 °C) in light of previous studies in literature reporting a reversible transition to a hexagonal phase somewhere below 900 °C.To this end, single phase cubic BSCF powders were annealed at different temperatures over varying periods of time. Phase composition was subsequently analysed by X-ray diffractometry (XRD) in order to determine both the temperature limit and the time-scale for the formation of the hexagonal phase. Additionally, the long-term behaviour of the electrical conductivity was examined on bulk samples at 700 °C, 800 °C and 900 °C over several hundreds of hours, showing a prolonged decrease at 800 °C. The decrease in electrical conductivity at this temperature was also examined on bulk samples with different grain sizes, showing a more pronounced decrease the smaller the average grain size.Coexistence of both phases (cubic and hexagonal) could also be shown for 700 °C, however with a different phase equilibrium than at 800 °C.     

Characterization of the Landau expansion equation for SrTiO3 under pressure

This work focuses on the characterization of the expansion of Landau's main equation for Pm3?m structures, which are transformed with symmetry subgroups, associated with M+3 and R+4 special points of the Brillouin zone, under hydrostatic pressure. This solution has been adapted to include the general influence of hydrostatic pressure and the evolution of the order parameter. We present a simple scheme in order to search systematically the ground state of all perovskite structures derivable from octahedral rotations under high pressure. We have applied this adaptation to SrTiO₃ perovskite. Results of the characterization of Landau′s equation for the cubic-tetragonal phase transition under pressure are discussed here.     

Determining the micro-optical element surfaces profiles using transmission deflectometry with liquids

We propose a method for simultaneously measuring the front and back surface profiles of transparent optical components. The proposed method combines dual wavelength transmission deflectometry with liquids to record distorted phases at different wavelengths, and then numerically reconstructs the three-dimensional phase information to image the front and back surfaces of the lens. We propose a theoretical model to determine the surface information, and the imaging of achromatic lenses is experimentally demonstrated. Unlike conventional transmission deflectometry, our proposed method supports direct observation of the front and back surface profiles of the optical elements. Compared with other techniques such as interferometry, the proposed setup is simpler to align, has lower cost, and does not require coherent illumination. The proposed method can be applied to normal transmission deflectometry for determining the three-dimensional surface profiles of optical components.     

Addendum to “Switching effect and the metal–insulator transition in electric field” by A.L. Pergament et al. [J. Phys. Chem. Solids 71 (2010) 874]

In the paper mentioned above we reported on the switching mechanism in vanadium dioxide which was shown to be based on the electronically-induced Mott insulator-to-metal transition occurring in conditions of the non-equilibrium carrier density excess in the applied electric field, and the proposed model involved the dependence of the carrier density n on electric field (the Poole–Frenkel effect), as well as the dependence of the critical electric field on n. The data on the n(T) dependence were obtained on the assumption of a temperature-independent carrier mobility μ, and the problem of n reduction at lower temperatures was not fully understood. In this Letter we revisit this problem in the light of some recent data on the μ(T) dependence for VO₂. It is shown that the adjusted values of n, taking into account this μ(T), correspond to the Mott critical density within an order of magnitude.     

Deposition and properties of high-carbon iron films

Thin high-carbon iron films were deposited by pulsed laser deposition onto grids for transmission electron microscopy using pre-combined carbon/iron targets with equal area ratio. The deposited films of about 20 nm in thickness were directly characterized by transmission electron microscopy. The films showed a variety of phases, surprisingly also including the NaCl-type FeC phase, which was theoretically predicted in the literature. For comparison, thin high-carbon stainless-steel films were deposited onto oxidized Si wafers with different carbon ratios in the targets (10, 20, 40 and 50 at.%). These films were characterized by means of Mössbauer Spectroscopy, the magneto-optical Kerr-effect, grazing incidence X-ray diffraction and Rutherford backscattering spectrometry. With these methods clearly defined multilayer-structures were observed which could lead to interesting magneto-resistance phenomena if the thickness of the multilayers can be controlled by the processing parameters.     

Temperature dependence of thermal property for lead nitrate crystal

Thermal property was measured in a lead nitrate crystal, Pb(NO₃)₂, at temperatures from 90 to 340 K by use of ac calorimetry technique. The heat capacity derived from the measurements showed temperature dependence with thermal hysteresis, in the temperature region from 240 to 300 K. The anomaly of the heat capacity was found in the vicinity of 275.22 K. The broad temperature variation in the heat capacity was observed in the region from 235 to 260 K.     

Fields,particles and universality in two dimensions

We discuss the use of field theory for the exact determination of universal properties in two-dimensional statistical mechanics. After a compact derivation of critical exponents of main universality classes, we turn to the off-critical case, considering systems both on the whole plane and in presence of boundaries. The topics we discuss include magnetism, percolation, phase separation, interfaces, wetting.