固液相变的分子动力学研究Ⅰ─—(KI)_(108)离子簇的熔化和凝固(英)

通过分子动力学模拟，考查并分析了（KI）108离子簇的结构、能量和相变的动力学行为．在加热和冷却过程中，离子簇再现了熔化和凝固现象，而且熔化起始于立方体的其一顶点，熔化的离子簇不是球形的，说明了离子簇的非湿特征．根据结晶的成核速率，讨论了电子衍射实验中观察KI凝固的可能性     

Optical CO(2) sensor of the combination of colorimetric change of alpha-naphtholphthalein in poly(isobutyl methacrylate) and fluorescent porphyrin in polystyrene

An optical CO₂ sensor based on the overlay of the CO₂ induced absorbance change of pH indicator dye α-naphtholphthalein in poly(isobutyl methacrylate) (polyIBM) layer with the fluorescence of tetraphenylporphyrin (TPP) in polystyrene layer is developed. The observed luminescence intensity from TPP at 655 nm increased with increasing the CO₂ concentration. The ratio I₁₀₀/I₀ value of the sensing film consisting of α-naphtholphthalein in polyIBM and TPP in polystyrene layer, where I₀ and I₁₀₀ represent the detected luminescence intensities from a layer exposed to argon and CO₂ saturated conditions, respectively, that the sensitivity of the sensor, is estimated to be 192. The response and recovery times of the sensing film are less than 6.0 s for switching from argon to CO₂, and for switching from CO₂ to argon. The signal changes are fully reversible and no hysterisis is observed during the measurements. The highly sensitive optical CO₂ sensor based on fluorescence intensity changes of TPP due to the absorption change of α-naphtholphthalein in polyIBM layer with CO₂ is achieved.     

1─芳氧基乙酰基─4─苯甲酰氨基硫脲衍生物的合成及其生物活性研究

１─芳氧基乙酰基─４─苯甲酰氨基硫脲衍生物的合成及其生物活性研究魏太保，陈继畴（西北师范大学化学系，兰州，７３００７０）杨素铀，王秀春（西北师范大学生物系，兰州，７３００７０）关键词：１—芳氧基乙酰基—４—苯甲酰基氨基硫脲，相转移催化，合成，生物活性...     

Volume and heat capacity of model non-aqueous self-assembly systems

Blends of immiscible polymers are often stabilized by block copolymers which can form non-aqueous micelles and microemulsions in the liquid polymers. The phase diagrans, apparent volumes and apparent heat capacities of model non-aqueous binary and ternary systems were studied in order to investigate the conditions under which such self-assembly systems could form. 1,2-Hexanediol, which can cosolubilize hexane and ethyleneglycol, forms inverse micelles in hexane and weak microaggregates in ethyleneglycol. Genapol X-060, a commercial alcoholic surfactant containing on the average an aliphatic chain of 13 carbons and 6 oxyethylenes (C₁₃E₆), forms microaggregates in poly(ethyleneglycol) 400. These self-assembly systems are strengthen in the presence of a third component which has an affinity for the inner phase.Presented at the Symposium, 76^th CSC Congress, Sherbrooke, Quebec, May 30–June 3, 1993, honoring Professor Donald Patterson on the occasion of his 65^th birthday.     

Fluorocarbons in the global environment: a review of the important interactions with atmospheric chemistry and physics

Fluorocarbon impact on ozone depletion is reviewed together with the efficacy of the Montreal Protocol in acting to correct the imbalance between stratospheric ozone production and destruction. The Protocol is also helping to reduce global warming: CFCs are shown to be currently the largest fluorocarbon contributors to climate change. Relative contributions to climate change from CFCs and their HFC substitutes are discussed, together with the consequences of control of minor greenhouse gases on an environmental impact which is dominated by carbon dioxide emissions. Both the potencies of the materials for environmental change and their concentrations in the atmosphere are important and are considered here.Trifluoroacetic acid, a minor product of atmospheric decomposition of some HCFCs and HFCs and of the pyrolysis of fluoropolymers, has been shown to be uniformly distributed in seawater to a depth of over 4000 m and so is natural, although the actual source has yet to be identified.The Montreal Protocol is only one example of action to reduce undesirable impact from fluorocarbons. Other, less universal, actions include abatement of fluoroform greenhouse gas emissions from HCFC manufacturing, process changes to eliminate trifluoromethylsulfur pentafluoride emissions from electrochemical fluorination and ceasing manufacture of perfluorooctanyl sulfonate compounds due to their persistence in human tissue.     

Determination of complex formation constants by phase sensitive alternating current polarography: Cadmium-polymethacrylic acid and cadmium-polygalacturonic acid

The use of phase sensitive alternating current polarography (ACP) for the evaluation of complex formation constants of systems where electrodic adsorption is present has been proposed. The applicability of the technique implies the previous selection of the phase angle where contribution of capacitive current is minimized. This is made using Multivariate Curve Resolution by Alternating Least Squares (MCR-ALS) in the analysis of ACP measurements at different phase angles. The method is checked by the study of the complexation of Cd by polymethacrylic (PMA) and polygalacturonic (PGA) acids, and the optimal phase angles have been ca. −10° for Cd-PMA and ca. −15° for Cd-PGA systems. The goodness of phase sensitive ACP has been demonstrated comparing the determined complex formation constants with those obtained by reverse pulse polarography, a technique that minimizes the electrode adsorption effects on the measured currents.     

A free energy calculation study of the effect of H-->F substitution on binding affinity in ligand-antibody interactions

Changes in binding affinity to catalytic antibody 6D9 of chloramphenicol phosphonate derivatives (CPDs) containing H or F were investigated by performing free energy calculations based on molecular dynamics simulations. We calculated the binding free energy, enthalpy, and entropy changes (DeltaDeltaG, DeltaDeltaH, and -TDeltaDeltaS) attributable to H-->F substitution by comparing results for CPDs containing a trifluoroacetylamino group (CPD-F) or an acetylamino group (CPD-H). The calculated DeltaDeltaG, DeltaDeltaH, and -TDeltaDeltaS values were -2.9, -6.3, and 3.5 kcal mol(-1) and close to experimental values observed for a series of similar ligands, chloramphenicol phosphonates with F and H (-1.4, -3.5, and 2.1 kcal mol(-1)). Therefore, CPD-F binds more strongly to 6D9 than does CPD-H. To clarify the origin of the large difference in DeltaDeltaG, we apportioned the calculated values of DeltaDeltaG and DeltaG for the associated and dissociated states into contributions from various atomic interactions. We found that the H-->F substitution increased the binding affinity mainly by decreasing the hydration free energy and not by increasing favorable interactions with the antibody. The decreased hydration free energy of the ligand was mainly due to unfavorable coulombic interactions between the trifluoroacetylamino group and solvent waters, which increased the free energy of the dissociated state (by about 3.7 kcal mol(-1)). Also, the trifluoroacetylamino group slightly increased the free energy level of the associated state (about 0.8 kcal mol(-1)) because favorable van der Waals interactions compensated for unfavorable coulombic interactions with antibody atoms. In addition, the enthalpy and entropy changes, DeltaDeltaH and -TDeltaDeltaS (computationally -6.3 and 3.5 kcal mol(-1)), originated mainly from a decrease in hydration free energy in the dissociated state. The CPD-F and CPD-H ligands had substantially different structures in the dissociated and complexed states.     

Phase separation behavior of epoxy resin modified with crosslinked rubber

Low molecular weight liquid rubber (ATBN = amine terminated butadiene acrylonitrile copolymer or CTBN = carboxyl terminated butadiene acrylonitrile copolymer)–DGEBA (diglycidyl ether of bisphenol A) blends indicated upper critical solution temperature (UCST) behavior. The phase separation behavior of the neat and crosslinked rubber (ATBN, CTBN)–epoxy blends was analyzed by a laser light scattering experiment. Lauryl peroxide (LPO) was employed to crosslink the rubber during the initial annealing stage. The onset point of the phase separation in the crosslinked ATBN–epoxy system occurred later than in the case of the neat ATBN–epoxy system. However, the onset point of the phase separation process started earlier in the case of the crosslinked CTBN–epoxy system. The domain correlation length of the crosslinked rubber-added system was smaller than that of the neat rubber-added system.     

高折光指数光学树脂的合成——相转移法合成不饱和硫醇酯单体的条件控制

采用正常的低温相转移催化（ＰＴＣ）和反滴碱溶液ＰＴＣ法分别合成了含硫双烯ＭＥＳＤＭＡ和单烯ＭＥＰＳＭＡ．１Ｈ ＮＭＲ分析证明ＭＥＳ中的杂质主要是由原料ＴＤＧ引入的．对含单个巯基的ＭＥＰＳ的正常ＰＴＣ酯化接枝双键，因存在巯基和不饱和双键的加成反应而导致失败．作者最终得到了折光指数在１６２５以上的ＭＥＳＤＭＡ／ＭＥＰＳＭＡ共聚物．     

分子手性的温度效应：D-丙氨酸的变温X衍射和中子衍射研究

利用X衍射（300, 270, 250 K）和中子衍射（300, 260, 250, 240 K）研究D-氨酸单晶在静态的和动力学的变温过程中的结构特征以及考证Salam预言的由D到L构型转变的可能性. 实验发现丙氨酸晶体的空间群P212121对称性没有改变. 实验结果否定了构型相变的可能，但是发现在~250 K有一个微小的、连续的对称性破缺发生. 晶体分子振动产生的环电流模型可以用来解释D-和L-丙氨酸单晶直流磁化率和天然旋光角相反的现象， 与之相关的中子衍射数据进一步揭示了变温过程中αC－H(2), N－H(1), N－H(4), N－H(6) 键长的不同变化. 中子衍射还显示了质子移动所导致的动力学无序，来源于分子内氨基和羧基形成的氢键和分子间αC－H和氨基形成的氢键，从而产生的晶格扭曲和NH³⁺的扭转. 实验结果表明Salam预言相变不是传统意义的结构相变，而是由于温度效应导致了在相变点附近分子的宇称破缺能差（PVED）增大，然后通过氨基酸分子的隧道效应扩大了宇称破缺能差的影响，这一研究为生命现象中快速的均一手性形成提供了非线性机理的合理解释.