The backward phase flow and FBI-transform-based Eulerian Gaussian beams for the Schrödinger equation

We propose the backward phase flow method to implement the Fourier–Bros–Iagolnitzer (FBI)-transform-based Eulerian Gaussian beam method for solving the Schrödinger equation in the semi-classical regime. The idea of Eulerian Gaussian beams has been first proposed in [12]. In this paper we aim at two crucial computational issues of the Eulerian Gaussian beam method: how to carry out long-time beam propagation and how to compute beam ingredients rapidly in phase space. By virtue of the FBI transform, we address the first issue by introducing the reinitialization strategy into the Eulerian Gaussian beam framework. Essentially we reinitialize beam propagation by applying the FBI transform to wavefields at intermediate time steps when the beams become too wide. To address the second issue, inspired by the original phase flow method, we propose the backward phase flow method which allows us to compute beam ingredients rapidly. Numerical examples demonstrate the efficiency and accuracy of the proposed algorithms.     

Anisotropic flow at RHIC

STAR’s measurement of directed flow for pions,kaons(K 0 S ),protons and anti-protons,for Au+Au collisions at 200 GeV obtained in Run7 are presented,as well as elliptic flow for identified particles measured in Au+Au(Run7) and Cu+Cu(Run5) collisions.It is found that the slope of proton v 1 (y) at midrapidity is extremely small.Elliptic flow results are compared to Hydro calculation and the discrepancy is discussed.     

Research on the optical fiber gas flowmeters based on intermodal interference

In this work, a self-heating type optical fiber flowmeter with high sensitivity was proposed. The core-offset fiber structures were employed to couple a part of signal light into the fiber cladding layer, and the other part of light still propagated in the core layer. The intermodal interference between the two parts of light happened when the cladding modes were coupled back into core layer. Meanwhile, the high power laser was also introduced into fiber to heat the silver film coated on the surface of the cladding layer. When the cool gas flow passed, the temperature of the sensor probe decreased due to the heat transfer process. Because of the thermo-optic effect in the fiber, interference spectrum could be shifted when the temperature was changed. The experimental results showed the resolution of the proposed sensor was 2×10⁻² m/s in the region of 0–8 m/s. The highest sensitivity could achieve 1537 pm/(m/s).     

低温气液两相流数值计算

低温工质两相流动在很多场合都存在,研究深冷剂在两相流动时参数的分布有着很重要的作用.文中采用一维均相流模型对液氮循环流动过程进行稳态数值模拟,得到了循环流动过程中液氮含汽率、压力和温度沿管程方向的分布情况,并对由于不同回路条件引起的不同结果进行了分析.     

低温液体流动沸腾数值计算中的相间传热模型

采用双流体模型预测了液氮在垂直管内的流动沸腾过程,着重考察和评价了五个常用的相间传热模型对数值计算结果的影响,找出了最优的相间传热模型;同时,研究还发现相间传热模型对流动压降的预测并无明显影响.     

分压与限流线路特性分析

在电学实验的创新设计类问题中,常常涉及到滑线变阻器的分压线路和限流线路。本文对滑线变阻器的分压线路和限流线路的特性作一较系统的分析,对涉及到此类问题的实际工作具有指导意义。     

基于滑移网格与RNG湍流模型计算泵内的动静干扰

本文利用三维Navier-Stockes方程和RNG湍流模型,在转动与静止部件间采用滑移网格技术建立交互界面,对泵内动静干扰引起的三维非定常湍流进行了计算,得到了旋转叶轮与固定导叶间流体的湍流特征。从计算结果可知,静叶与动叶间各点的压力脉动频率成分一致,且幅值沿周向呈正弦变化规律。这说明利用滑移网格技术及RNG湍流模型,可以模拟三维非定常动静干扰流动问题。     

自然循环加热段内对流传热特性的实验研究

本文以常压去离子水为工质,对自然循环工况下上升加热段内单相水的对流传热特性进行了实验研究。实验结果表明,自然循环工况下上升加热段内工质的物性变化及由浮升力引起的自由流动对对流传热特性有重要影响。通过分析,提出了计算自然循环工况下上升加热段内单相水的对流换热系数的经验关系式。     

多普勒漂移对超音速燃气流光辐射特性计算的影响

分析了超音速射流由于高速相对运动产生多普勒谱线漂移效应对光辐射特性计算的影响。通过采用逐线计算法对不同环境压力、气流温度、气流速度条件下超音速燃气射流在不同的红外光谱区(2.7微米谱带和4.3微米谱带)光辐射谱带积分强度的计算结果比较表明:多普勒漂移效应受环境总压影响最大,压力越大多普勒漂移的影响越小;随着温度升高多普勒漂移效应的影响降低;随着相对速度的增加,多普勒漂移效应的影响多数情况下是增加的。     

基于分时原理的多相流体比例分配方法

提出了从“时间”上对多相流进行分配的新思路,分析了分时分配的基本原理,并设计了具体的实现方式。在空气-水实验回路上对分时分配装置进行了实验研究和验证。分时分配的基本原理就是通过“分时”的方法,使整个分配器“空间”内的多相流都能按照给定的时间份额周期性地交替流向对应的支路,从而保证各支路内的多相流具有高度一致的相含量和确定的流量比例。实验研究证明,分时分配法具有切实的可行性,分流比等于分时比且与流量和流体的物性无关,仅取决于分配器的几何参数。