远场来流对过冷熔体中球状晶体生长的影响

利用渐近分析方法研究了远场来流引起的对流对过冷熔体中球状晶体的生长形态的影响.结果表明,由远场来流导致的对流使得正在生长的球状晶体的界面在向着来流的前部朝来流方向相反的方向生长, 并且提高了朝来流的相反方向的生长速度, 在背风方向衰减；正在衰减的球状晶体的界面在向着来流的前部加速衰减, 在背风方向减缓衰减. 关键词： 球状晶体 远场来流 对流 界画形态     

铸铁材料在边界润滑条件下形成薄片状磨屑的塑性流动机制

本文在铸铁材料油润滑线接触滑动磨损状态研究的基础上,对边界润滑区典型的薄片状磨屑之形成过程进行了考察。通过对磨损表面的几何形貌、磨屑的形态和内部显微组织变化的分析,提出了薄片状磨屑的塑性流动形成机制。作者认为,薄片状磨屑的形成是磨损表面材料在局部应力和摩擦热的作用下以3种方式发生塑性流动的结果:当摩擦方向垂直于磨削加工条纹时为单侧塑性流动;当摩擦方向平行于磨削加工条纹时为双侧塑性流动;而在峰顶平台(磨削加工粗糙条纹磨合后形成的微平台)较大且载荷较高时,则为平台上的材料沿着摩擦方向向前挤压流动。     

格栅-空腔自激振荡流场扰动形成机理研究

格栅-空腔流动会引发流场自激振荡现象,产生结构振动及噪声问题.研究此类现象的形成机理对相关设备的减振降噪设计具有重要意义.目前已知这种现象是在流场正逆向两种扰动的耦合作用下形成的,但上述两种扰动的形成机理尚未明确.针对该问题,建立了格栅-空腔流动数值模型,并进行非稳态数值模拟.通过分析压力振荡数据及流场结构演化过程,对...     

非定常瞬态流动过程中的Lagrangian拟序结构与物质输运作用

从Lagrangian角度数值分析了圆柱瞬时起动过程中的非定常瞬态流动现象,如分离泡产生、破裂和涡脱落等及其产生的非定常效应,揭示了所列现象诱导的物质输运和迁移效应,首先采用双时间步长的特征线算子分裂算法数值模拟了圆柱起动过程中的瞬时流场,然后采用数值方法从流场中提取出Lagrangian拟序结构(LCSs),并根据非线性动力学理论研究了流动分离和旋涡演化过程中的物质输运作用,结果表明,圆柱瞬时起动后所产生的非定常阻力与相应瞬态现象中的物质输运有密切的关系:对称分离泡产生及其在流向方向的生长,能够使分离泡内压力升高且分布均匀,从而减小阻力;对称分离泡的失稳增强了分离泡与主流之间的物质输运作用,最终导致涡的脱落,并有利于推迟流动分离和减小分离区域,非定常流动中LCSs所描述的物质输运和迁移作用对流动控制的机理研究具有一定指导意义。     

多孔介质BISQ模型中的慢纵波

着重研究了多孔介质BISQ模型中慢纵波的基本特性.给出了BISQ模型下慢纵波速度 和衰减的低频近似公式.与Biot理论对比，BISQ模型中慢纵波的衰减随频率降低急剧增大， 且随喷射流长度的减小而增加；相速度随喷射流长度的减小而增加，其低频极限值不是零； 孔隙流体位移与固相骨架位移之比的幅值随喷射流长度的增加而减小，其相位特点与Biot模 型预测的不同；在流体与孔隙介质的边界上可产生更大的渗流.为对比，同时也给出快纵波 的行为.依据BISQ模型可推断：非黏滞流体饱和孔隙介质中不存在喷射流机理；BISQ模型中 关键词： 多孔介质 喷射流 慢纵波 动力协调     

A Split-Flow Enzyme Thermistor

Abstract

The split-flow system is comprised of two identical micro-columns, one of which contains an immobilized enzyme preparation, the other an inert support material.

The heat produced in each column on introduction of a sample is measured with thermistors placed in these columns. The use of a reference column virtually eliminates the influence on the measurements of artifactual signals as unspecific heat, i.e., heat not produced by the enzymic reaction. The performance of the split-flow enzyme thermistor at a variety of pH's, ionic strengths or viscosities associated with the sample has been investigated and compared with previously described alternative enzyme thermistor arrangements. In this comparative study glucose at a concentration of 5 · 10^?4 M was used throughout. On passage through the imnobilized glucose oxidase preparation this solution gave rise to a heat change At of about 0.01°C. The insensitivity of the system described herein towards such variations makes it particularly suitable for the analysis of metabolities present in crude solutions such as urine and skim-milk.     

Surface tension and viscosity measurements of liquids with the survismeter: a single instrumental unit

Surface tension (γ) and viscosity (η) data of aqueous solutions of the deoxyadenosine (DOA) and the deoxyribose (DOR) sugars have been measured with the survismeter, a new instrument, along with tetrahydrofuran (THF), dimethylformamide (DMF), acetonitrile and dimethylsulphoxide (DMSO) solvents. The same properties have also been measured with a stalagmometer and a viscosimeter, respectively, which afford the same information, albeit at the expense of a larger amount of chemicals and solvents. We obtain comparatively better accuracy in both kinds of measurements than with conventional methods. Therefore, the survismeter lends itself as a simple and reliable instrument.     

Melting heat transfer in the stagnation‐point flow of an upper‐convected Maxwell (UCM) fluid past a stretching sheet

The steady laminar boundary layer flow and heat transfer past a stretching sheet arre considered. Upper‐convected Maxwell (UCM) fluid is treated as a rheological model. The resulting nonlinear differential system is solved by homotopy analysis method (HAM). The influence of melting parameter (M), Prandtl number (Pr), Deborah number (β) and stretching ratio (A = a/c) on the velocity and temperature profiles is thoroughly examined. It is noticed that fields are effected appreciably with the variation of parameters. Furthermore, it is seen that the local Nusselt number is a decreasing function of melting parameter. Copyright © 2011 John Wiley & Sons, Ltd.     

An anti‐diffusive volume of fluid method for interfacial fluid flows

A volume of fluid (VOF) method is developed combining a first‐order limited downwind scheme with higher order accurate schemes. The method is characterized by retaining a sharp fluid interface and a reduction in numerical diffusion near the interface, but avoids complicated geometrical reconstruction as occurs in most volume tracing algorithms. To demonstrate the accuracy and robustness of the method, a selection of numerical experiments are presented involving a pure advection problem, a water wave impact caused by a dam breaking and liquid sloshing in a partially filled tank. Copyright © 2011 John Wiley & Sons, Ltd.     

Mixed convection unsteady stagnation point flow over a stretching sheet with heat transfer in the presence of variable free stream

An analysis is performed for the unsteady mixed convection flow of an incompressible viscous fluid about a stagnation point on a stretching sheet in the presence of a variable free stream. The equations of motion and energy are transformed into the ordinary differential equations by using similarity transformations. Homotopy analysis method is used for the solution of the governing problem. The results have been discussed by plots. The present values of the function are shown very close to the previous limiting solutions. Copyright © 2011 John Wiley & Sons, Ltd.