Influence of multiwall carbon nanotubes on morphological and structural changes during UV irradiation of syndiotactic polypropylene films

The effect of UV irradiation on the morphology and structure of syndiotactic polypropylene (sPP) is investigated both for pure films and those filled with multiwall carbon nanotubes (MWCNTs). UV treatment causes a structural reorganization of pure sPP films. It seems that the incorporation of MWCNTs has a strong stabilizing effect, with nanotubes acting as a limiter of the UV‐induced chain breakage, especially when a good dispersion of carbon nanotubes in the polymer is achieved. The incorporation of MWCNTs introduces a high concentration of defects in the crystal structure of sPP, which limits the UV‐induced growth of crystallites, and prevents the development and propagation of cracks caused by UV irradiation. © 2012 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys, 2012     

Shear modulus determination in model hydrogels by means of elongated magnetic nanoprobes

The mechanical characterization of complex soft matter by quasi-static magnetometry using nanoscopic magnetic probes is demonstrated for model hydrogels doped with two types of elongated magnetic nanoparticles. Chemically crosslinked poly(acrylamide) (PAAm) hydrogels serve as the matrix in which nickel nanorods or weakly magnetized hematite (α-Fe₂O₃) ellipsoids are embedded as local probes. We investigated the swelling behavior of the ferrogels in order to verify that their equilibrium swelling degree in water is not influenced by the probes, shows a good correlation with the Frenkel–Flory–Rehner model. The proposed magnetomechanical method relies on a correlation between the shear modulus of the PAAm hydrogel matrix and the coercive fields of the corresponding isotropic ferrogels. By extending the Stoner–Wohlfarth model for single-domain blocked magnetic particles by a term for particle rotation in an elastic matrix, information on the shear modulus of the matrix can be obtained. Comparison of the results with the expected relation from rubber elasticity theory illustrates both the general potential as well as the limits of the approach. © 2012 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys, 2012     

Fabrication of 3D electrospun structures from poly(lactide‐co‐glycolide acid)–nano‐hydroxyapatite composites

The fabrication of three‐dimensional (3D) electrospun composite scaffolds was presented in this study. Layers of electrospun meshes made from composites of poly(lactide‐co‐glycolide acid) (PLGA) and hydroxyapatite (HA) were stacked and sintered using pressurized gas. Three HA concentrations of 5, 10, and 20 wt % were tested, and the addition of the HA nanoparticles decreased the tensile mechanical properties of the meshes with 20 wt % HA. However, after the gas absorption process, the fibers within the mesh sintered, which improved the mechanical properties more than twofold. The fabrication of 3D, porous, electrospun scaffolds was also demonstrated. The resulting 3D scaffolds had open porosity of up to 70% and modulus of ～20 MPa. This technique improves on the current electrospinning technology by overcoming the challenges of depositing a thick, 3D structure. © 2011 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys, 2011     

Does a Photocatalytic Synergy in an Anatase–Rutile TiO2 Composite Thin‐Film Exist?

It has often been suggested that anatase–rutile mixtures/composites synergistically enhance photocatalysis. However, in the case of dense thin‐films containing an intimate mix of both anatase and rutile phases, such an effect has not been observed. In synthesising combinatorial films with graded film thickness and phase, and applying established photocatalytic mapping methods, we were able to assess how dense thin‐films of intimately mixed anatase–rutile mixtures affect photocatalytic performance. We found that no photocatalytic synergy between anatase–rutile composites (29≤rutile %≤83) within such dense thin‐film systems exists. In fact, an increased presence of rutile caused the photocatalytic activity to fall. This was explained by the unfavourable energetics in the multiple electron transfers required between several neighbouring rutile and anatase sites for the photo‐generated electron to reach the material’s surface; encouraging the trapping of electrons within the bulk and increasing the likelihood of charge recombination. The decrease in photocatalytic activity was found to vary linearly with rutile component.     

Morphological,thermal, and biodegradation properties of LLDPE/treated date palm waste composite buried in a soil environment

In this study, date palm waste that was naturally treated as a filler in a linear-low density polyethylene (LLDPE) matrix was recycled to prepare green composites. Two types of LLDPE, based on basic additives, were used. UV stabilizer and the slip and anti-block were added as basic additives. The objective of this study was to examine the effect of these basic additives and the treated filler on the biodegradation, morphological, and thermal properties of the prepared samples by a soil burial test. The samples were characterized by Fourier-transform infrared (FT-IR) spectroscopy and X-ray diffraction (XRD). Weight loss was calculated to investigate the biodegradation of the sample, and SEM and thermogravimetric analyses were performed to reveal the morphology and thermal properties before and after burial, respectively. Results showed that the presence of the bio-filler accelerated the biodegradation of the composites. The UV stabilizer had a positive impact on biodegradation factors whereas anti-block additives appeared resistant to biodegradable factors. The morphology and thermal stability of all the prepared samples changed after burial due to the effects of biodegradation during the burial.     

Electrical Impedance Spectroscopic Study of CNT/Ethylene-alt-CO/Propylene-alt-CO Polyketones Nanocomposite

Impedance spectroscopy was utilized to investigate the dielectric properties, ac conductivity and charge transport mechanisms in propylene-alt-CO/ethylene-alt-CO (EPEC) random terpolymer filled with multi-walled carbon nanotubes (MWCNT) as a function of nanofiller content, frequency, and temperature. Equivalent resistor-capacitor (RC) circuit models were proposed to describe the impedance characteristics of the unfilled terpolymer and the nanocomposite at different temperatures. For the nanocomposites, the ac conductivity tended to be frequency independent at low frequencies. At high frequencies, the ac conductivity increased with frequency. The dc conductivity (i.e., plateau of the ac conductivity at low frequencies) at room temperature increased from 10^?9 (Ω·m)^?1 for the unfilled polymer to l0^?3 (Ω·m)^?1 for the 6 wt% MWCNT/EPEC nanocomposite. At low temperatures, the equivalent RC model for EPEC-0 and EPEC-2 was found to consist of a parallel RC circuit. However, for 6 wt% MWCNT/EPEC nanocomposite, an RC model consisting of an R/constant phase element (CPE) circuit and a resistor in series was required to describe the impedance behavior of the nanocomposite.     

Determination of tensile strength of UHMWPE fiber-reinforced polymer composites

Quasi-static tensile test of UHMWPE fiber-reinforced composite laminate is challenging to perform due to low interlaminar shear strength and low coefficient of friction. Tensile tests proposed in the literature were conducted and limitations associated with each method led to the evolution of a new method. Tensile test of single-ply was realized as the best representative of tensile strength of a composite than tensile test of UHMWPE laminate. A fixture was developed for single-ply tests which increased friction and provided the mechanical constraint to slipping. The fixture is easy to fabricate and has provided repeatable results for eight grades of UHMWPE fiber-based (0/90) fabrics. Reported tensile strengths are in quite high range of 900–1500 MPa.     

Nickel Oxide/Graphene Composites: Synthesis and Applications

Nickel oxide (NiO) has emerged as one of the most promising transition-metal oxides (TMOs) for electrochemical capacitors, batteries, catalysis, and electrochromic films, owing to its cost-effectiveness, abundance, and well-defined electrochemical properties. Recent studies have identified that mixing NiO with graphene or graphene derivatives results in novel composites with synergistic effects and superior electrochemical performance. This review summarizes the latest advances in composites of NiO with graphene or graphene derivatives. The synthetic strategies, morphologies, and electrochemical performance of these composites are introduced, as well as their electrochemical applications in supercapacitors, batteries, sensors, catalysis, and so forth. Finally, tentative conclusions and assessments regarding the opportunities and challenges for the future development of these composites and other TMOs/graphene or graphene-derived composites are presented.