On the accumulation of eigenvalues of operator pencils connected with the problem of vibrations in a viscoelastic rod

In this paper, we study the problem of the boundary accumulation of a discrete spectrum, which is essential for a boundary-value problem of fourth order arising in the theory of small transverse vibrations in an inhomogeneous viscoelastic rod (a Kelvin—Voigt body). We establish conditions for such an accumulation and its asymptotics, which are expressed in terms of the coefficients defining the problem posed by the differential expression. The results obtained are illustrated by numerical computation data.     

非线性E-V回归模型中参数估计的渐近性质

本文讨论了非线性E-V回归模型中参数的估计问题,构造了未知参数β0的最小二乘估计β和误差方差σ2的估计σ2,证明了β具有渐近正态性,同时也证明了σ2依概率收敛于σ2的速度可达到n-1/2.     

板的非线性热弹耦合振动（Ⅰ）：近似解析解

本文以文[2,3,4]为基础,导出了板的热弹耦合非线性振动控制方程,在采用Galerkin法离散化以后,按各个变量性质分别用多尺度法或正则摄动法求得近似解析解。籍此可揭示系统各参数对非线性热弹耦合振动影响的机理和作出必要的近似计算,对工程实际具有较大的参考价值。     

Action of a Periodic Load on an Elastic Floating Plate

The problem of the behavior of an elastic floating plate in the form of a strip under the action of a periodic surface load is solved using the Wiener-Hopf technique. The shortwave approximation is found in explicit form. The effect of the frequency and nature of the acting load on the vibration amplitudes of the fluid and the plate is investigated numerically. It is found that for certain loads no waves propagate in the fluid and the vibrations of the plate are localized in the neighborhood of the acting load. Conditions under which local vibration can be realized are found.__________Translated from Izvestiya Rossiiskoi Academii Nauk, Mekhanika Zhidkosti i Gaza, No. 2, 2005, pp. 132–146.Original Russian Text Copyright © 2005 by Tkacheva.     

Resonant flexural vibrations and dissipative heating of a piezoceramic ring plate with nonuniformly electroded surfaces

The forced flexural vibrations and dissipative heating of a bimorph ring plate are studied. The plate is made of viscoelastic piezoceramics and is polarized across the thickness. The outer surfaces of the plate are nonuniformly electroded, and harmonic electric excitation is applied to the electrodes. The viscoelastic behavior of the material is described using the concept of temperature-dependent complex moduli. The coupled nonlinear problem of thermoviscoelasticity is solved by time iteration using, at each iteration, the discrete-orthogonalization method to integrate the mechanics equations and the explicit finite-difference method to solve the heat-conduction equation with a nonlinear heat source. Numerical calculations demonstrate that by changing the size of the ring electrode we can influence the natural frequency, stress and displacement distributions, dissipative-heating temperature, and amplitude-and temperature-frequency characteristics. With certain boundary conditions, there is an optimal electrode configuration that produces deflections of maximum amplitudes when an electric excitation is applied __________ Translated from Prikladnaya Mekhanika, Vol. 42, No. 3, pp. 102–109, March 2006.     

Convective Instability of the Flow of a Binary Mixture under Conditions of Vibration and Thermal Diffusion

Stability of a plane-parallel flow of a nonuniformly heated binary mixture filling a vertical layer located in a field of gravity and in a high-frequency vibrational field is studied. The axis of vibrations is directed along the layer. The case of rigid and isothermal boundaries of the layer impermeable for the mixture is considered. The influence of thermal diffusion on the evolution of the admixture and the thresholds of flow stability is taken into account. The study is performed on the basis of equations for averaged fields. An asymptotic method with the use of the perturbation wavenumber as a small parameter is applied in the long-wave limit. For arbitrary values of the wavenumber, the limit of stability was determined by numerical integration. Charts of stability of gaseous and liquid binary mixtures are plotted. __________ Translated from Prikladnaya Mekhanika i Tekhnicheskaya Fizika, Vol. 47, No. 2, pp. 77–84, March–April, 2006.     

Application of an Itô-based approximation method to random vibration of a pinching hysteretic system

In this paper, an extension of the Cumulant-Neglect closure scheme is utilized for the random vibration analysis of a single degree of freedom system with a general pinching hysteresis restoring force. The hysteresis element used in the system model can simulate commonly observed forms of stiffness, strength and pinching degradations. The second order statistics of the system response to a stationary Gaussian white noise input are derived using an Itô-based approximation technique. The validity of these response statistics are then verified by comparing them to Monte Carlo simulation results. The numerical studies performed for different combinations of degradation parameters and excitation levels show that the response estimates obtained by this solution method are in good agreement with Monte Carlo simulation. These studies also indicate the applicability of this technique for response analysis of complicated forms of non-linearities.     

Nonlinear Longitudinal Vibrations of Transversally Polarized Piezoceramics: Experiments and Modeling

Nonlinear behavior of piezoceramics at strong electric fields is a well-known phenomenon and is described by various hysteresis curves. On the other hand, nonlinear vibration behavior of piezoceramics at weak electric fields has recently been attracting considerable attention. Ultrasonic motors (USM) utilize the piezoceramics at relatively weak electric fields near the resonance. The consistent efforts to improve the performance of these motors has led to a detailed investigation of their nonlinear behavior. Typical nonlinear dynamic effects can be observed, even if only the stator is experimentally investigated. At weak electric fields, the vibration behavior of piezoceramics is usually described by constitutive relations linearized around an operating point. However, in experiments at weak electric fields with longitudinal vibrations of piezoceramic rods, a typical nonlinear vibration behavior similar to that of the USM-stator is observed at near-resonance frequency excitations. The observed behavior is that of a softening Duffing-oscillator, including jump phenomena and multiple stable amplitude responses at the same excitation frequency and voltage. Other observed phenomena are the decrease of normalized amplitude responses with increasing excitation voltage and the presence of superharmonics in spectra. In this paper, we have attempted to model the nonlinear behavior using higher order (quadratic and cubic) conservative and dissipative terms in the constitutive equations. Hamilton's principle and the Ritz method is used to obtain the equation of motion that is solved using perturbation techniques. Using this solution, nonlinear parameters can be fitted from the experimental data. As an alternative approach, the partial differential equation is directly solved using perturbation techniques. The results of these two different approaches are compared.     

“Frictionless” and “frictional” ThermoElastic Dynamic Instability (TEDI) of sliding contacts

Recently, we found that a new form of coupled instability, named ThermoElastic Dynamic Instability (TEDI), can occur by interaction between frictional heating and the natural dynamic modes of sliding bodies. This is distinct from the classical dynamic instabilities (DI) which is produced by an interaction between the frictional forces at the sliding interface and the natural modes of vibration of the bodies if the friction coefficient is sufficiently high, and also from ThermoElastic Instability (TEI), which is due to the interaction of frictional heating and thermal expansion, leading for example to low pitched brake noise above some critical speed. This result was relative to an highly idealized system, comprising an elastic layer sliding over a rigid plane including both dynamic and thermoelastic effects, but neglecting shear waves at the interface due to frictional tractions (from which the denomination “frictionless TEDI”). We demonstrate here that including these shear waves destabilizes both the shear and dilatational vibration modes of the system at arbitrarily small friction coefficients and speeds, where DI and TEI are predicted to be stable. A detailed study of the new modes and transient simulations show that for low pressures and high speed, the system tends towards the results of the previous model (“frictionless TEDI”), i.e. the tendency to a state in which the layer bounces over the plane, with alternating periods of sliding contact and separation. In the case of low speeds and high pressures, viceversa, the system is dominated by the modes near the resonance of the shear and dilatational modes, with a resulting complex behaviour, but generally leading to stick-slip regimes, reducing the jumping mode of “frictionless TEDI”, because stick reduces or stops frictional heating production.