木麻黄质膜离子泵在酸雨条件下对镧的响应

研究镧对酸雨(pH为4.5)胁迫下木麻黄幼苗早期生长和质膜离子泵ATP酶活性的影响。结果表明:较低浓度La3+浸种能使幼苗株高、根长、鲜重以及质膜质子泵活性明显增强,在200mg·L-1La3+处理时达到最高增强值,而高浓度的La3+浸种使之表现出抑制效应;幼苗质膜钙泵的活性受La3+抑制。质子泵活性与细胞的伸长生长呈显著正相关关系,镧对质子泵的活化作用有助于促进植物的生长,且适量的镧具有缓解酸雨胁迫下生长的植物细胞质酸化,维持细胞内环境稳定的间接作用。为抗酸雨和促生长,木麻黄经镧浸种8h的最适宜La3+浓度为50～200mg·L-1。     

SPATIAL AND SEASONAL DISTRIBUTIONS OF ATMOSPHERIC CARBONACEOUS AEROSOLS IN PEARL RIVER DELTA REGION, CHINA

Concentrations and spatial distributions of organic carbon (OC) and elemental carbon (EC) in atmospheric particles were measured at 8 sites in four cities (Hong Kong, Guangzhou, Shenzhen and Zhuhai) of Pearl River Delta Region (PRDR), China during 2001 winter period and 2002 summer period. PM2.5 (particie diameter smaller than 2.5 um) and PM10 (particie diameter smaller than 10 um) samples were collected on pre-fired quartz filters with mini-volume samplers and analyzed using thermal optical reflectance (TOR) method. The average PM2.5and PM10 Ievel were 60.1 and 93.1 μg·m-3, respectively, with PM2.5 constituting 65.3% of the PM10 mass. The average OC and EC concentrations in PM2.5 were 12.0 and 5.1 μg·m-3, respectively, while those in PM10 were 16.0 and 6.5 μg·m-3, respectively. The carbo-naceous aerosol accounted for 37.2% of the PM2.5 and 32.8% of the PM10. The highest concentrations of OC and EC were observed at Guangzhou city in both vvinter and summer seasons. The average OC/EC ratios were 2.     

C70O2可能异构体的结构和电子光谱的理论研究＊

用AM1、 PM3及INDO系列方法研究了C     

Effect of H impurity on misfit dislocation in Ni-based single-crystal superalloy： molecular dynamic simulations

The effect of H impurity on the misfit dislocation in Ni-based single-crystal superalloy is investigated using the molecular dynamic simulation.It includes the site preferences of H impurity in single crystals Ni and Ni 3 Al,the interaction between H impurity and the misfit dislocation and the effect of H impurity on the moving misfit dislocation.The calculated energies and simulation results show that the misfit dislocation attracts H impurity which is located at the γ/γˊinterface and Ni₃ Al and H impurity on the glide plane can obstruct the glide of misfit dislocation,which is beneficial to improving the mechanical properties of Ni based superalloys.     

In situ deposition behavior of silica-based layers and its effect on thermal degradation of IN713 turbine blades during operation of a micro-gas turbine

This study examined the in situ deposition behavior of silica-based layers on IN713 turbine blades during the operation of a 13 kgf-class gas turbine at a rotation speed of 20,000/min as well as its effect on the degradation of the metallic substrate. Tetraethylorthosilicate (TEOS) was mixed with the fuel (liquid petroleum gas, LPG) and burned to generate silica-based coating precursors for deposition from the flame. Two deposition conditions were adopted. For condition 1 (C1), the silicon-to-carbon ratio in the mixed fuel was set at 0.1 mol% for the first 5 min and at zero mol% for the final 95 min in a 100-min operation. For condition 2 (C2), the ratio was set at 0.005 mol% during the entire 100 min operation. The total TEOS feed was the same under both conditions. C1 resulted in a rather uniform and thicker (5-10 μm on the pressure side) porous silica-based coating on the blade than C2. The in situ deposited layer of C1 was well preserved on the blade and protected the underlying metallic substrate from oxidation during the entire 100 min operation. The layer on the C2 blades was ∼5 μm thick at the region near to root, but was too thin in the other areas on the blade to be protective. The early build-up of a porous layer to an effective thickness on the blades produced a thermal barrier toward the substrate as well as a diffusion barrier toward the oxidizing elements during operation.     

Formation of Intermediate Layers for Immobilization of Biomacromolecules by Self‐Assembling and Reduction of Phenyldiazonium Salts. A Comparative Study

Two types of biomolecules were tested in the comparison of usefulness of two ways of formation of the intermediate layers at electrodes: a 20‐nucleotide DNA sequence and glucose oxidase. Chronocoulometric, amperometric, electrochemical impedance and PM‐IRRAS experiments proved that the layers obtained by electroreduction of diazonium salts are much more stable and more efficient in the accumulation of biomolecules compared to layers obtained by self‐assembling of appropriate thiols.     

Chemical composition of PM_(2.5) during winter in Tianjin,China

PM2.5 samples for 24 h were collected during winter in Tianjin,China. The ambient mass concentration and chemical composition of the PM2.5 were determined. Ionic species were analyzed by ion chromatog-raphy,while carbonaceous species were determined with the IMPROVE thermal optical reectance(TOR) method,and inorganic elements were measured by inductively coupled plasma-atomic emission spec-trometer. The daily PM2.5 mass concentrations ranged from 48.2 to 319.2 g/m3 with an arithmetic average of 144.6 g/m3. ...     

Phosphorus as sintering activator in powder metallurgical steels: characterization of the distribution and its technological impact

Powder metallurgy is a highly developed method of manufacturing reliable ferrous parts. The main processing steps in a powder metallurgical line are pressing and sintering. Sintering can be strongly enhanced by the formation of a liquid phase during the sintering process when using phosphorus as sintering activator. In this work the distribution (effect) of phosphorus was investigated by means of secondary ion mass spectrometry (SIMS) supported by Auger electron spectroscopy (AES) and electron probe micro analysis (EPMA). To verify the influence of the process conditions (phosphorus content, sintering atmosphere, time) on the mechanical properties, additional measurements of the microstructure (pore shape) and of impact energy were performed. Analysis of fracture surfaces was performed by means of scanning electron microscopy (SEM). The concentration of phosphorus differs in the samples from 0 to 1% (w/w). Samples with higher phosphorus concentrations (1% (w/w) and above) are also measurable by EPMA, whereas the distributions of P at technically relevant concentrations and the distribution of possible impurities are only detectable (visible) by means of SIMS. The influence of the sintering time on the phosphorus distribution will be demonstrated. In addition the grain boundary segregation of P was measured by AES at the surface of in-situ broken samples. It will be shown that the distribution of phosphorus depends also on the concentration of carbon in the samples.