利用井中偶极弯曲波反演渗透率的影响因素及灵敏度分析

本文以各向同性饱和流体孔隙介质充液井孔中声场传播理论为基础,系统考察了影响偶极弯曲波特征的主要因素,分析了快慢地层条件下弯曲波衰减和速度对不同参数的敏感度,对比结果表明,弯曲波的速度基本不受地层渗透率的影响,其衰减对渗透率的敏感性要远高于速度。弯曲波中心频率会随着波的衰减而发生偏移,说明利用弯曲波衰减和频移特征联合反演地层渗透率是可行的。通过对比快慢地层下的弯曲波衰减和速度灵敏度曲线,发现在慢速地层中反演渗透率的结果要好于快速地层。同时,本文也指出在低孔低渗储层中,还可以考虑利用弯曲波衰减识别气层。     

线性规划联合算法的理论与应用

本在[1]的基础上．较系统的叙述了线性规划联合算法的步骤、相关理论及其应用，指出该算法具有避免人工变量、减少迭代次数、使用灵活、应用方便等特点。     

低加速度灵敏度水听器

本文介绍了一种用于拖曳线列阵声呐的压电陶瓷型水听器，我们在提高水听器工作稳定性与可靠性，并确保水听器有较高接收灵敏度的前提下，进行了水听器的结构方案优化设计，以降低水听器的加速度灵敏度，研制的水听器接收灵敏度为－１９３ｄＢ，在２０－１０００Ｈｚ频段内灵敏度起伏为１．２ｄＢ，加速度灵敏为－７０ｄＢ。     

用于位置灵敏型中子探测器的6LiF/ZnS（Ag）闪烁体性能研究

研究了掺杂6LiF的ZnS(Ag)闪烁体对中子、γ射线的发光特性和EJ426闪烁体样品的热中子探测效率、出射光产额和γ灵敏度。EJ426的热中子探测效率为32.4%,出射光产额为8.01×103光子/中子,70 mV阈值时的γ灵敏度小于10-7,表明EJ426是较理想的闪烁体型位置灵敏中子探测器材料。     

Au-Nanoparticle-Array/Aligned-Ag-Nanowire-Based Flexible Dual Plasmonic Substrate for Sensitive Surface-Enhanced Raman Scattering Detection

The fabrication of flexible surface-enhanced Raman scattering (SERS) substrates for sensitive detection on uneven or irregular surfaces is challenging. In this study, a flexible dual plasmonic SERS (FDPS) substrate rationally constructed using Au nanoparticle (AuNP) arrays/aligned Ag nanowires (AgNWs) and elastic polyurethane (PU) is demonstrated. It exhibits high sensitivity (detection limit of 10⁻⁸ m for melamine and 10⁻¹⁰ m for malachite green) and excellent reproducibility. The well-designed structure of AuNP arrays/aligned AgNWs fabricated using block copolymer self-assembly and oil–water–air interfacial self-assembly successfully enhances the electromagnetic field through plasmonic coupling. In addition, the FDPS substrate retains a high SERS sensitivity after exposure to air at room temperature for 30 days because of the high stability of AuNP arrays and antioxidation characteristic of the PU covered on the aligned AgNWs. Even after undergoing stretching, bending, and twisting for 100 cycles, the FDPS substrate maintains a stable SERS activity owing to the introduction of the elastic PU. This study demonstrates a potential application of SERS detection under practical conditions for irregular surfaces and may be helpful in the development of flexible sensors.     

燃料敏感性对内燃机部分预混燃烧(PPC)光谱特性的影响研究

在一台光学发动机上,利用火焰高速成像技术和自发光光谱分析法,研究了燃料敏感性(S)为0和6时对发动机缸内火焰发展和燃烧发光光谱的影响。试验过程中,通过改变喷油时刻(SOI=-25,-15和-5°CA ATDC)使燃烧模式从部分预混燃烧过渡到传统柴油燃烧模式。通过使用正庚烷、异辛烷、乙醇混合燃料来改变燃料敏感性。结果表明,在PPC模式下(-25°CA ATDC),火焰发展过程是从近壁面区域开始着火,而后向燃烧室中心发展,即存在类似火焰传播过程,同时在燃烧室下部未燃区域也形成新的着火自燃点。敏感性对燃烧相位影响较大,对缸内燃烧火焰发展历程影响较小;高敏感性燃料OH和CH带状光谱出现的时刻推迟,表明高敏感性燃料高温反应过程推迟,且光谱强度更低,表明碳烟辐射强度减弱。在PPC到CDC之间的过渡区域(-15°CA ATDC),燃烧火焰发光更亮,燃烧反应速率比-25°CA ATDC时刻的反应速率更快。高、低敏感性燃料对缸压放热率的影响规律与-25°CA ATDC相近,此时的燃烧反应更剧烈,放热率更高,碳烟出现时刻更早。该喷油时刻下的光谱强度高于PPC模式下的光谱强度,说明此时的CO氧化反应与碳烟辐...     

光寻址电位传感器的正交相位检波检测方法

光寻址电位传感器的幅度检测方法易受噪声干扰,灵敏度差,信噪比和精度低,且受调制光源的影响较大,影响检测结果的准确性.为此提出了一种基于正交相位检波的光寻址电位传感器检测方法.该方法是将光寻址电位传感器的输出光电流信号分别与两路正交信号相乘,通过低通滤波提取直流分量并相除,即可得到光寻址电位传感器的输出信号相位信息.与已有的光寻址电位传感器相位检测方法相比,该方法具有算法复杂度低、实时性高的优点.实验研究了调制光源光强对光寻址电位传感器幅度检测和相位检测的影响,对比分析了光寻址电位传感器的传统幅度检测方法与正交相位检波检测方法对pH检测的灵敏度、线性度及信噪比.结果表明,相比于幅度检测方法,调制光源光强对光寻址电位传感器的相位检测影响更小,在频率为10 kHz,pH的范围为1.68~10.01的情况下,相位检测方法比幅度检测方法测得的灵敏度增加了7 mV/pH,精度提高了14.9 mpH,非线性误差减小了0.003%,均方差减少了0.1051×10^-5,信噪比增加了8.2827 dB.该方法特别适用于弱光下的光寻址电位传感器检测.     

Effect of high gamma dose on the PADC properties

The effect of the properties of PADC nuclear track detectors after exposure to high doses of gamma absorbed doses up to 5×10⁵ Gray (50 Mrad) were studied. The gamma source was a 9.03 PBq (244 KCi), Co-60 source. Results indicate that each of the bulk etch rate (V_b), the tracks etch rate (V_t) and the sensitivity (V) of the detectors increases with the high gamma absorbed dose, but there is a drop in these parameters at the low gamma absorbed dose. Signs of surface roughness were observed by increasing the gamma absorbed doses and changes in color observed for doses larger than 2×10⁵ Gray. The temperature of detectors during irradiation time reached 41°C. The fission fragment tracks (from Cf-252 source) disappeared quickly within the etching time (minutes) for total absorbed doses greater than 3×10⁵ Gray due to their high bulk etch rate.     

Robust suboptimal control of nonlinear systems

In this paper, we consider a nonlinear dynamic system with uncertain parameters. Our goal is to choose a control function for this system that balances two competing objectives: (i) the system should operate efficiently; and (ii) the system’s performance should be robust with respect to changes in the uncertain parameters. With this in mind, we introduce an optimal control problem with a cost function penalizing both the system cost (a function of the final state reached by the system) and the system sensitivity (the derivative of the system cost with respect to the uncertain parameters). We then show that the system sensitivity can be computed by solving an auxiliary initial value problem. This result allows one to convert the optimal control problem into a standard Mayer problem, which can be solved directly using conventional techniques. We illustrate this approach by solving two example problems using the software MISER3.     

A Hydrocarbon-sensitized Argon Ionization Detector for the Detection of Inorganic Compunds

Noble gas ionization detectors make it possible to determine inorganie trace components in gases. Among the several modes of operation of these detectors the hydrocarbon-sensitized argon detector is a farourable compromise with regard to the relation of the expense to the attainable detection limit. The suitability of this detector for the determination of H₂, O₂, N₂, CH₄ and CO₂, in pure gases is shown.