The potential of serially coupled alkyl-bonded silica monolithic columns for high resolution separations of pharmaceutical compounds in biological fluids

Summary In this paper we investigate the potential of alkyl-bonded silica monolithic columns for the isolation and identification of drug-related components in biological fluids. Up to 6 columns have been connected in series to produce a chromatographic system with up to 40,000 plates. This high-resolution chromatography system has been coupled to both MS and NMR to enable efficient detection and characterisation of drug-related components in biological fluids. The use of six coupled columns has been shown to give enhanced resolution over a high quality silica particulate column packed with 3 μm material which exhibits the same back pressure. The effect of volume and mass load on the performance of monolithic columns for semi-preparative chromatography of biological fluids has also been investigated. In these studies it was possible to inject up to 100 mL of neat urine with no loss of chromatographic performance. Furthermore, upon re-testing, the columns showed similar chromatographic performance. Again several columns were serially connected, producing enhanced resolution in the semi-preparative mode.     

Thermal conductivity measurements on ferrofluids

The thermal conductivity of a number of ferrofluids consisting of colloidally dispersed Fe₃O₄ particles in diester, hydrocarbon, water and fluorcarbon carriers have been measured at 38°C. The variation in thermal conductivity with particle concentration is well described by Tareef's equation (1940). This has enabled the ratio of the physical to magnetic size to be determined and compared with estimates of the ratio obtained from electron micrographs and magnetic measurements.The fit between theory and experiment is particularly good for hydrocarbon carrier fluids giving the ratio of solid to magnetic radiusR _i/R _m=1.24±0.03 compared with the value obtained from magnetic data and electron micrographs of 1.19±0.07. The corresponding value from the fluids with a diester carrier ranges between 1.1<R _d/R _m<1.3 which is again consistent with microscopy and magnetic data.The application of a magnetic field of 0.1 T had no noticeable effect on the thermal conductivities of ferrofluids.     

Synthesis and characterisation of advanced UHMWPE/silver nanocomposites for biomedical applications

A supercritical fluid (SCF) route for facile and homogeneous introduction of silver nanoparticles into polymer hosts is described. Our focus is on ultra-high molecular weight polyethylene (UHMWPE). We demonstrate that the metallic nanoparticles have a substantial effect upon the wear and tribochemical properties of the polymer substrate.     

Field-induced structural ordering in electrorheological fluids

Structural relaxations of an electrorheological fluid (ERF) due to changes in the applied electrical field strength or shear rate are observed on time scales 1 s<t<40 000 s. Commercial ERFs consisting of mesoscopic polyurethane particles in a silicone oil matrix were studied by three different experimental techniques in order to obtain and compare the characteristic relaxation times. It is demonstrated that dielectric spectroscopy, viscosimetry and light transmission experiments represent the same results concerning the structural relaxation phenomena of ERFs when electrical fields are applied. The tendency of strong induced dipoles to align the particles in the direction of the field increases the effective dipole moment and therefore , the shear viscosity and the amount of light transmitted along the field direction in an ITO/glass sandwich cell. The optical experiment is capable of resolving fast processes within the first 1 ms if large electrical fields are applied. The effects of electrophoresis and shearing, which both counteract the field induced structures, are also addressed.     

Criticality and phase transitions in ionic fluids

Recent experimental investigations of criticality and phase separation in ionic fluids have revealed behavior of great theoretical interest. In seeking to understand the experiments, some of which appear to exhibit argonlike criticality and some of which exhibit classical (mean-field) criticality, a convenient starting point is the restricted primitive model (RPM) of symmetrically charged hard spheres, all of equal diameter , each sphere bearing a positive or negative charge of magnitudeq. There is overall charge neutrality, so that the expected number densities of the anions and cations are equal, ₊= _-. Studies of RPM charge-charge and density-density correlation functions indicate that the fluctuation-suppressing mechanism that yields mean-field critical behavior in nonionic systems with long-range interparticle potentials is not operative in the RPM. On the basis of plausible assumptions, Ising-like behavior is instead expected. The above work is summarized. New work of Zhang and the author is outlined, showing that when one loses the RPM symmetry (through, e.g., different valence, diameter, or dipole moment of anions and cations) a strong coupling between charge-charge and density-density correlation ensues. The way in which this can be expected to give rise to mean-field or mean-field-like behavior is noted. Other new observations concern the mean-field analogy found by Høye and the author between the parameter 2/(d–2) (d is the dimensionality) in that model and the monomer number in high polymers, with respect to the coexistence-curve shape dependence on those parameters.     

Synthesis of magnetic DDAB vesicles

The synthesis of magnetic vesicles is described. The vesicles are constituted by didodecyldimethylammonium bromide and have a diameter of about 1 m. An aqueous magnetic fluid, constituted by charged magnetic nanoparticles dispersed in water without surfactant, is encapsulated in the vesicle with a volume fraction in particles that may range up to 10%. The first step of the encapsulation is the synthesis of a multiple emulsion the intermediate oily phase being evaporated to obtain the DDAB bilayer. The magnetic vesicles thus synthesized align and change shape when a magnetic field is applied.     

Classical fluids of negative heat capacity

It is shown that new parametersX can be defined such that the heat capacity C_xT(S/T)_x is negative, even when the canonical ensemble [i.e., at fixed T=(U/S)_Y and YX] is stable. This implies an extension of the classical theory of polytropes from ideal gases to general fluids. As examples of negative heat capacity systems we treat blackbody radiation and general gas systems with nonsingular _T. For the case of a simple ideal gas we even exhibit an apparatus which enforces a constraint X(p, V)=const that makes C_x<0. We then show that it is possible to infer the statistical mechanics of canonicallyunstable systems-for which even the traditional heat capacities are negative-by imposing constraints that stabilize the associated noncanonical ensembles. Two explicit models are discussed.     

Physicochemical Principles of Extraction with Supercritical Gases

The present review considers some physicochemical properties of fluid mixtures that are of importance for fluid extraction and supercitical fluid chromatography (SFC). Firstly, the important types of phase diagrams are treated, the occurrence of solid phases also being considered in some simple cases. Specific examples are given of mixtures of a highly volatile component I (e.g. CO₂, C₂H₆) with a relatively involatile component II (e.g. squalane) of very different molecular size, shape, structure, and/or polarity, and it is shown how the rather complicated types of phase diagrams can be calculated and correlated. The importance of fluid mixtures extends far beyond the fields of science and technology reviewed.     

Surface chemistry of nanoscale Fe_3O_4 dispersed in magnetic fluids

The interaction between stabilizers and nanoparticles is one of the important factors to prepare stable magnetic fluids. The magnetic nano-size Fe3O4 core with single domain and the average grain size around 8-12 nm were prepared by chemical precipitation method. The O/Fe molar ratio of the particle surface was measured by X-ray photoelectron spectroscopy (XPS). The heat effects of stabilizers ad- sorption on nanoparticles were measured by solution calorimetry. The excess amount of oxygen was possibly the result of the hydroxygen formed on the surface of the nanoparticles. The heat effects showed that compounds containing carboxyl groups can be adsorbed chemically on magnetite by forming chemical bonds. The other stabilizers involving NH-groups, such as polyethylene-imine, can be adsorbed physically. The exothermic value is about half of the former case.     

Sample preparation for organic acids in biological fluids

A review of sample preparation methods for organic acids in biological fluids, in particular serum and urine, is presented. It covers techniques on organic acid determination without sample preparation, release of organic acids from binding locations, removal of proteins by protein precipitation and ultrafiltration, isolation of the organic acids by liquid-liquid and liquid-solid extraction, purification of the extract, derivatization and pre-fractionation. The various alternative sample preparation steps are compared and critically discussed. Examples of applications including profile analysis of organic acids by gas chromatography (GC), determination of particular organic acids by GC or liquid chromatography and determination of fatty acids as a distinct chemical class of acids demonstrate that the kind of sample preparation chosen depends strongly on the analytical aims.