矩形截面毛细管电泳和二维分离

在石英单晶表面制成矩矩截面毛细管柱中进行电泳实验。由于矩形柱比圆形柱有更大散热侧面积且石英单晶的导热性能远无于熔融石英，所以可施加较高的场强，不仅提高了柱效，而且缩矩了分离时间。两相交的通道之间形成自然连接，可实现二维分离，并消除死体积。     

Inside the Solvency 2 Black Box: Net Asset Values and Solvency Capital Requirements with a least-squares Monte-Carlo approach

The calculation of Net Asset Values and Solvency Capital Requirements in a Solvency 2 context–and the derivation of sensitivity analyses with respect to the main financial and actuarial risk drivers–is a complex procedure at the level of a real company, where it is illusory to be able to rely on closed-form formulas. The most general approach to performing these computations is that of nested simulations. However, this method is also hardly realistic because of its huge computation resources demand. The least-squares Monte Carlo method has recently been suggested as a way to overcome these difficulties. The present paper confirms that using this method is indeed relevant for Solvency 2 computations at the level of a company.     

A new coding scheme of QC-LDPC codes for optical transmission systems

Based on Galois Field (GF(q)) multiplicative group, a new coding scheme for Quasi-Cyclic Low-Density Parity-Check (QC-LDPC) codes is proposed, and the new coding scheme has some advantages such as the simpler construction, the easier implementation encoding, the lower complexity of the encoding and decoding, the more flexible adjustment of the code length as well as the code rate and so forth. Under the condition of considering the characteristics of optical transmission systems, an irregular QC-LDPC (3843,3603) code to be suitable for optical transmission systems is constructed by applying the proposed new coding scheme. The simulation result shows that the net coding gain (NCG) of the irregular QC-LDPC (3843,3603) code is respectively improved 2.14 dB, 1.19 dB, 0.24 dB and 0.14 dB more than those of the classic RS (255,239) code in ITU-T G.975, the LDPC (32640,30592) code in ITU-T G.975.1, the regular SCG-LDPC (3969,3720) code constructed by the Systematically Constructed Gallager (SCG) coding scheme and the regular QC-LDPC (4221,3956) code at the bit error rate (BER) of 10-8. Furthermore, all the five codes have the same code rate of 93.7%. Therefore, the irregular QC-LDPC (3843,3603) code constructed by the proposed new coding scheme has the more excellent error-correction performance and can be better suitable for optical transmission systems.     

An even earlier (1717) usage of the expression “golden section”

In a previous article in this journal, Roger Herz-Fischler has pointed out an early usage of the expression “golden section” from 1789. In this note an even earlier usage from 1717 is discussed.     

On the use of surfaces of section in the N-body ring problem

In the N-body ring problem, we investigate the motion of a massless body interacting with N bodies of equal masses at the vertices of a regular polygon that rotates around a central mass. In this paper, we analyze the use of different surfaces of section in the numerical exploration of the escape in the N-body ring problem in order to get some conclusions about the geometry of the basins of escape in the corresponding configuration spaces.     

Structural response of high solidity net cage models in uniform flow

Hydrodynamic loads acting on a fish farm may be affected by the growth of different biofouling organisms, mainly due to increased solidity of the nets. In this paper, the hydrodynamic loads acting on high solidity net cage models subjected to high uniform flow velocities and the corresponding deformation of the net cages are studied. Model tests of net cylinders with various solidities were performed in a flume tank with a simulated current. Standard Morison-type numerical analyses were performed based on the model tests, and their capability of simulating the occurring loads and the observed net cage deformations for different flow velocities was evaluated.Large deformations of the net cage models were observed, and at high velocities the deformations were close to what is physically possible. Net cage deformation appeared to be less dependent on solidity than on flow velocity and weights. Drag forces increased with increasing flow velocity and were dependent on both bottom weights and netting solidity. For the lowest solidity net, drag forces were close to proportional to flow velocity. For the three high solidity nets, the measured drag forces were of similar magnitude, and drag increased less with increasing flow velocity above approximately 0.5 m/s than at lower velocities.This study shows that a basic reduced velocity model is not sufficient to model the interaction between the fluid flow and net (hydroelasticity) for high solidity net cages subjected to high flow velocities.The standard numerical analysis was in general able to make good predictions of the net shape, and was capable of making an acceptable estimate of hydrodynamic loads acting on the lowest solidity net model (Sn=0.19). For high solidities and large deformations, numerical tools should account for changes in water flow and the global drag coefficient of the net.     

重度子痫前期产妇剖宫产布比卡因蛛网膜下腔阻滞麻醉适合剂量的临床研究

目的 探讨重度子痫前期产妇剖宫产重比重布比卡因蛛网膜下腔阻滞麻醉（腰麻）的适合剂量。方法 选取200例重度子痫前期产妇,ASAⅠ级或Ⅱ级,按随机数字表法分为4组,每组各50 例,相应各组鞘内注入布比卡因剂量分别为10、8、6 及4mg,并混合2.5μg 舒芬太尼。选择L3~4行腰硬联合穿刺,注药10min 后记录麻醉平面。根据结果进行Probit 回归分析,计算布比卡因腰麻的ED50和ED95。观察各组利多卡因及去氧肾上腺素的用量、肌松效果及患者麻醉满意度,观察各组术中并发症以及新生儿的Apgar 评分和脐动脉pH。结果 重度子痫前期患者腰麻剖宫产布比卡因ED50 和ED95分别为：6.51（95%CI：5.81～7.01）和8.68（95%CI：7.96～10.26）。4 组患者10min 后麻醉平面的差异均有统计学意义（均P＜0.05）。4mg 组利多卡因用量高于其他3组,差异有统计学意义（P＜0.05）。8mg 组、10mg 组去氧肾上腺素的用量高于其他两组,差异均有统计学意义（均P＜0.05）。低血压的发生率8mg 组、10mg 组高于其他两组,差异均有统计学意义（均P＜0.05）。４ 组间其他不良反应恶心、呕吐、寒战以及心动过缓发生率的差异无统计学意义（P＞0.05）。4 组胎儿娩出后1、5min Apgar 评分及脐动脉血气分析的结果差异均无统计学意义（均P＞0.05）。结论 重度子痫前期产妇剖宫产鞘内注入6mg 布比卡因混合2.5μg舒芬太尼,必要时辅以硬膜外麻醉,麻醉效果确切,血流动力学稳定,适合该类患者手术麻醉。     

基于改进极根学习机的回转窑煅烧带温度预测方法

针对传统算法预测回转窑煅烧带温度存在精度低、速度慢的问题,提出了基于改进极限学习机(ELM)的回转窑煅烧带温度预测方法。对ELM输入权值矩阵定义了变换系数,采用黄金分割法在给定区间内搜寻变换系数的最佳值,改进了ELM网络参数的确定方式,弥补了随机确定输入权值并且不作调整的缺陷,在保证ELM训练速度的前提下提高预测精度、减小模型随机性。实验结果表明,改进的ELM预测精度高、训练速度快、模型性能优,可满足工况恶劣的回转窑的生产需要。     

Evaluation of ion mobility in capillary electrophoresis coupled to mass spectrometry for the identification in metabolomics

Currently, feature annotation remains one of the main challenges in untargeted metabolomics. In this context, the information provided by high-resolution mass spectrometry (HRMS) in addition to accurate mass can improve the quality of metabolite annotation, and MS/MS fragmentation patterns are widely used. Accurate mass and a separation index, such as retention time or effective mobility (μ_eff), in chromatographic and electrophoretic approaches, respectively, must be used for unequivocal metabolite identification. The possibility of measuring collision cross-section (CCS) values by using ion mobility (IM) is becoming increasingly popular in metabolomic studies thanks to the new generation of IM mass spectrometers. Based on their similar separation mechanisms involving electric field and the size of the compounds, the complementarity of ^DTCCS_N2 and μ_eff needs to be evaluated. In this study, a comparison of ^DTCCS_N2 and μ_eff was achieved in the context of feature identification ability in untargeted metabolomics by capillary zone electrophoresis (CZE) coupled with HRMS. This study confirms the high correlation of ^DTCCS_N2 with the mass of the studied metabolites as well as the orthogonality between accurate mass and μ_eff, making this combination particularly interesting for the identification of several endogenous metabolites. The use of IM-MS remains of great interest for facilitating the annotation of neutral metabolites present in the electroosmotic flow (EOF) that are poorly or not separated by CZE.     

高压直流断路器测控装置的设计与试验分析

直流输(配)电是目前电网发展的趋势,而高压直流断路器的研发是影响其发展的关键技术之一。测量与控制装置的研究是高压直流断路器的研发要点。采用高压电力电子器件,DSP+FPGA相结合的控制方式,对其测控装置进行研究分析,提出了区间阈值的控制方法及相应的控制时序,从高压直流输电、能源多样化的发展需求入手,将机械开关和固态开光相结合,设计了一套混合式高压直流断路器样机。通过对样机进行合分闸试验及故障分闸试验,证明了所研制的高压直流断路器样机具有分闸动作快,限弧能力强,动作一致性好等优点。