Nano‐Porous Light‐Emitting Silicon Chip as a Potential Biosensor Platform

Abstract

Nano‐porous silicon (PS) offers a potential platform for biosensors with benefits both in terms of light emission and the large functional surface area. A light emitting PS chip with a stable and functional surface was fabricated in our laboratory. When protein was deposited on it, the light emission was reduced in proportion to the protein concentration. Based on this property, we developed a rudimentary demonstration of a label‐free sensor to detect bovine serum albumin (BSA). A serial concentration of BSA was applied to the light chip and the reduction in light emission was measured. The reduction of the light intensity was linearly related to the concentration of the BSA at concentrations below 10^?5 M. The detection limit was 8×10^?9 M.     

纳米二氧化钒薄膜的电学与光学相变特性

采用双离子束溅射氧化钒薄膜附加热处理的方式制备了纳米二氧化钒薄膜。在热驱动方式下,分别利用四探针测试技术和傅里叶变换红外光谱技术对纳米二氧化钒薄膜的电学与光学半导体-金属相变特性进行了测试与分析。实验结果表明,电学相变特性与光学相变特性之间存在明显的偏差,电学相变温度为63 ℃,高于光学相变温度,60 ℃;电学相变持续的温度宽度较光学相变持续温度宽度宽;在红外光波段,随着波长的增加,纳米二氧化钒薄膜的光学相变温度逐渐增大,由半导体相向金属相转变的初始温度逐渐升高,相变持续的温度宽度变窄。在红外光波段,纳米二氧化钒薄膜的光学相变特性可以通过光波波长进行调控,电学相变特性更适合表征纳米VO₂薄膜的半导体-金属相变特性。     

无支持膜法TiO2纳米管透射电镜观察

用透射电镜观察纳米量级的样品,通常要承载在具有支持膜的铜风上观察,铜网上制膜虽然有多种方法,但者需要有一定的过程,经过实践,我们采取无支持膜法用铜网直接捞取TiO2纳米管样品,在诱射电镜下观察获得了比较满意的结果。     

化学镀镍-高磷合金的微观结构及晶化行为研究

分别以SnCl2.2H2O和SnCl2.5H2O为锡源,采用胶溶晶核法,经沉淀和胶溶过程,在液相中一步合成了金红石型TiO2。详细考察了各种胶溶条件对产物结构的影响,并通过两种锡源实验结果的比较对异相晶核法中两种锡源的成晶机理进行了分析,所合成的金红石型TiO2晶粒度为20－50nm,两种方法获得完全红金石型TiO2所需引入SnO2的最低物质的量的分数分别为10％和8％。     

Ce1—xM′xCa0.2O1.8—0.4x（M=Y,La和Gd）的水热合成及离子导电性质研究

采用水热法合成了系列双掺杂的萤石结构Ce1-xLnxCa0.2O1.8-0.4x固溶体,并研究了3种稀土离子对固溶体导电性的影响,发现掺杂离子半径接近Ce^4 时,体系电导率增大而活化能降低,同时发现水热合成的Ce1-xLnxCa0.2O1.8-0.4x样品的平均粒度按着掺入离子Y^3 ,Gd^3 ,La^3 的顺序逐渐减小,分别为32,20和15nm,这种变化是由于Y^3 半径比La^3 和G ^3 更接近Ce^4 ,因而在水热合成过程中, 掺Y^3 的体系更有利于晶粒的生长,得到的晶体粒度较大。     

片层硅酸盐用于热固性PU/PLS复合可能性探讨

高岭土(Kaolinite)和蒙脱土(Montromollite)等粘土,被广泛用作添加剂来改善聚合物的耐热性能。文章用各种先进技术对高岭土与蒙脱土的形态、组成和结构进行表征比较。电子透射电镜及电子探针(TEM/EDX)结果显示高岭土较蒙脱土有较大的粒径和较小的硅铝比,TEM还显示出这些粘土是由片层粒子堆积而成。热重分析(TGA)的结果表明蒙脱土由于失去吸附水从60 ℃升温至90 ℃失重明显(约7%),而高岭土在此温度下几乎不失水。高岭土脱除结构羟基官能团脱水失重的温度大约在510 ℃,低于蒙脱土的670 ℃。室温下光声傅里叶变换(PAS-FTIR)红外光谱显示蒙脱土在羟基吸收区有较强的吸附水的吸收,1 650 cm-1处孤立的弱吸收谱带可给予左证。变温红外和TGA的结果显示,片层硅酸盐表面的结构羟基从100～500 ℃非常稳定,它可以和异氰酸酯基团(NCO)封端的预聚物反应形成热固性PU/PLS复合聚合物。     

PMMA纳米球的制备及其银膜包覆技术

采用无皂乳液聚合法制备了单分散、直径为170 nm左右的聚甲基丙烯酸甲酯(PMMA)纳米球, 然后利用3-甲基丙烯酰氧基丙基三甲氧基硅烷(MATS)和3-巯丙基三甲氧基硅烷(MPTMS)对PMMA纳米球进行表面改性, 在其表面包覆一层均匀的巯基, 通过巯基与银离子之间的相互作用, 使银在PMMA纳米球表面成核长大, 从而合成PMMA/Ag纳米球壳粒子. 通过扫描电子显微镜、投射电子显微镜和紫外-可见吸收光谱测试技术对产物性能进行了表征, 研究结果表明, 制备的PMMA/Ag纳米球壳粒子的分散性好、包覆均匀.     

Nano- and micro-structure tin (IV) complexes bearing 4-pyridinecarbacylamidophosphate: Sonochemical synthesis,crystal structure,anti-cholinesterase activity,and docking studies

Two di- and triorganotin (IV) complexes, Sn (CH₃)₂Cl₂(4-PCAPh)₂ ( C ₁ ) and Sn(C₆H₅)₃Cl(4-PCAPh) ( C ₂ ); {4-PCAPh = 4-NC₅H₄C(O)NHP(O)(C₆H₁₂N)₂}, have been synthesized and characterized by elemental analysis, ¹H, ¹³C, ³¹P NMR and IR spectroscopy. The crystal structure of C ₁ has been confirmed by X-ray crystallography, which reveals an octahedral geometry surrounding Sn (IV). Both ligands function in an all-trans conformation, with an N-ligated mode for 4-PCAPh. Also, the complexes were prepared at nano- ( Ć ₁ ) and micro-size ( Ć ₂ ) by the sonochemical process. The role of reaction solvent and the concentration of initial reactants on the size and morphology of particles were studied and the products were characterized by X-ray powder diffraction (XRPD) and scanning electron microscopy (SEM). The activities and mechanism of complexes C ₁ , C ₂ , Ć ₁ , Ć ₂ and their corresponding ligand ( L ) on cholinesterase (ChE) were evaluated using a modified Ellman's method and Lineweaver-Burk plots. Nanosheet Ć ₁ showed the best activity against AChE and BChE with the IC₅₀ values being 73.08 ± 0.12 μM and 122.48 ± 0.69 μM, respectively, and the mixed-type mechanism. Molecular modeling simulation revealed the binding interaction template for Sn (CH₃)₂Cl₂(4-PCAPh)₂ with the ChE.     

Magnetically Recoverable Catalysts: Catalysis in Synthesis of Polyhydroquinolines

Molecules that contain polyhydroquinoline structural scaffolds are N-containing heterocycles which are of great interest to organic chemists and biologists. Polyhydroquinoline structural scaffolds which are known as calcium channel blockers have emerged as one of the most important class of drugs used for the treatment of cardiovascular and Alzheimer's diseases. Besides, recovery and reusability of catalysts are important issues to be discussed in modern catalysis research especially in organic synthesis. The concept of magnetically recoverable catalysts has been rapidly developed in recent times. Magnetic separation is an efficient strategy for the rapid separation of catalysts from the reaction medium. Also, an alternative to time-, solvent-, and energy-consuming separation techniques. In this review, we focused on the fabrication, surface-modification and characterization of nanomagnetic materials and their application, as magnetically recoverable catalysts, in the synthesis of polyhydroquinoline structural scaffolds.     

Convective MHD flow of hybrid-nanofluid within an elliptic porous enclosure

The essential aim of this modeling is to scrutinize the irreversibility and heat transfer of hybrid nanomaterial within a permeable medium. The inner elliptic surface experiences the uniform flux and outer wall maintains cold temperature. To scrutinize the impact of porous region, difference between the temperature of fluid and solid matrix was involved and stream function formulation was applied to simplify the equations. Outputs were obtained by means of CVFEM and its accuracy was check by comparing with previous article. Greater values for Ψ can be obtained with rise of Ra while opposite tendency appears for Ha. When Nhs* = 1, Ha = 1, growth of Ra provides 3.86 times lower values of Nu. Nu declines about 70.1% with growth of Ha when Ra* = 5, Nhs* = 0.01. Unfavorable effect of MHD on Nu declines with augment of Nhs*. Nu reduces about 72.5% with augment of Nhs when Ra* = 5, Ha = 1.