Sample decomposition in an electrically heated cold-trap inlet system for high speed gas chromatography

Thermal decomposition of some hydrocarbon and chlorinated hydrocarbon compounds in metal capillary tubes used in an inlet system for high speed gas chromatography has been investigated. The metal tube is cooled to about ?75°C by a flow of cold nitrogen gas in order to focus a vapor sample cryogenically. A capacitive discharge power supply is then used to heat the metal tube resistively in order to revaporize the sample and introduce it to the separation column as a plug 5-10 ms wide. The effects of tube temperature, tube material, sample vapor residence time, and type of carrier gas on thermal cracking are described. Use of a copper-nickel alloy tube resulted in less cracking than either pure platinum or pure nickel. Cracking is more significant with hydrogen as carrier gas than with helium. Cracking also increases with increasing sample residence time in the hot tube. Quantitative sample injection with minimum decomposition can be obtained for a variety of aliphatic and aromatic hydrocarbons and chlorinated hydrocarbon compounds.     

High pressure studies on new chiral compounds exhibiting TGBA phase

Effects of high pressures on phase sequences of the two homologousn=16 andn=18 of the (3-fluoro-4 ((R) or (S)-methylheptyloxy) 4, (4-fluoro benzoyloxy) tolans) series have been studied. Both compounds exhibit the new twisted Smectic A phase called Twist Grain Boundary TGB_A phase. The high pressure experiments were performed by thermobarometric analysis. The order of the transitions (first or second) have been determined in respect to pressure and temperature. The pressure-temperature phase diagrams show that the TGB_A phase is stabilized by increasing pressure; an inducedN ^* phase appears under high pressure for n=18 leading to the observation of TGB_A-N ^*-I triple point.     

Nucleation of the β-modification of isotactic polypropylene

The effects of the organic pigments C.I.P. RED 177 and C.I.P. Yellow 83 as nucleating agents on the crystallization of polypropylene were studied by DSC. The anthraquinone pigment exerted a significant effect, resulting in structural modifications with lower melting point, and particularly the -modification. The DSC curves exhibit four transition regions, with the following temperature intervals: I. 415–417 K, II. 423–425 K, III. 430–432 K and IV. 438–439 K. For evaluation of the -nucleation effect of pigments, the ratio (H ₁+H ₂)/(H ₃+H ₄) was suggested.     

Synthesis and structure of <Emphasis Type="Italic">N</Emphasis>-(2-(1-adamantyl)-2-hydroxyethyl)cytisine diastereomers

Diastereomers of N-(2-(1-adamantyl)-2-hydroxyethyl)cytisine were synthesized by reduction of N-(2-(1-adamantyl)-2-oxoethyl)cytisine with NaBH₄. Their structures were established using x-ray structure analysis. __________ Translated from Khimiya Prirodnykh Soedinenii, No. 3, pp. 244–247, May–June, 2007.     

The Influence of Sulfate‐Doping on the Nature of V Sites in VOx/TiO2 Catalysts

EPR, UV/Vis and FTIR spectroscopy as well as thermal analysis (TA/MS) were applied to study the influence of sulfate species present in the anatase support on the specific nature of VO_x species in supported VO_x/TiO₂ catalysts. Those sulfate species modify the local structure of the supported vanadyl species and lead to the formation of two types of VO²⁺ sites instead of only one type being formed on sulfate‐free anatase. EPR and FTIR spectroscopic measurements revealed that a part of the VO²⁺ species are directly bound to the surface sulfate species. By TA/MS it was found that SO₂ is released at lower temperature from VO_x/TiO₂ in comparison to the vanadium‐free support. The direct bonding between sulfate and VO_x species stabilizes the latter on the surface of VO_x/TiO₂ resulting in three effects: 1) a higher V site dispersion in comparison to sulfate‐free TiO₂, 2) a better resistance of surface vanadyls against diffusion into the bulk of the support and 3) a much faster reoxidation of reduced V sites than observed on sulfate‐free TiO₂.     

Inclusion of nickel(<Emphasis Type="SmallCaps">II</Emphasis>) and copper(<Emphasis Type="SmallCaps">II</Emphasis>) complexes with aliphatic polyamines in cucurbit[8]uril

The inclusion compound of macrocyclic cavitand cucurbit[8]uril (CB[8]) with the nickel(II) complex containing the tetraazamacrocyclic ligand cyclam, {[Ni(cyclam)]@CB[8]}Cl₂··16H₂O (1), and the inclusion compounds of CB[8] with the copper(II) bis-ethylene-diamine complex, {trans-[Cu(en)₂(H₂O)₂]@CB[8]}Cl₂·{CB[8]}·42H₂O (2a) and {trans-[Cu(en)₂(H₂O)₂]@CB[8]}Cl₂·17H₂O (2b), were synthesized and characterized by X-ray diffraction analysis, IR and ESR spectroscopy, and electrospray mass spectrometry. Guest—host inclusion compounds can be directly synthesized starting from a metal complex and cucurbit[8]uril, as was exemplified by the preparation of compounds 2a and 2b.__________Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 11, pp. 2414–2419, November, 2004.     

Topical Problems in Elemental Analysis of Advanced Ceramic Materials

Selected prominent problems in the analysis of advanced ceramic materials are surveyed. The importance of reliability of results is discussed in the field of elemental trace- and microanalysis in view of its interaction with economy, power of detection, local resolution and speciation selectivity. Particular problems in the analysis of major constituents, trace components and microlocal distributions are based on the striking propertics of ceramics; they are exemplified. Analytical assistance must start from the beginning of the production processing, in the preparation of the powdered base materials. Determination of the stoichiometry requires high accuracy and differentiation of chemical species in bulk and surface analysis of ceramic base powders. Element trace determination by direct instrumental methods requires standard reference materials for calibration; these are currently inavailable in a sufficient variety. For optimum reliability and power of detection, element traces must be prepared in isolated form in a small excitation volume for analysis. A review on the state-of-the-art of wet-chemical combined procedures is presented. Decomposition position procedures are emphasized, due to their risk of contributing severe systematic error. Combustion in elementary fluorine is presented for decomposition of refractory materials. The performance of some direct procedures is discussed. Very efficient methods are available for element trace determinations in ceramic materials, offering high detection power. Several approaches for high-resolution local microanalysis in non-conductive ceramic materials are identified as the most promising development in the analysis of sintered compact ceramic products and devices.     

Measurement of lactate in whole human blood with near-infrared transmission spectroscopy

We have evaluated the potential of near-infrared spectroscopy (NIRS) as a technique for rapid analysis of lactate in whole blood. To test the NIRS technique, a comparison was made with a standard clinical method using whole blood samples taken from five exercising human subjects at three different stage of exercise. To expand lactate concentration within the physiological range, standard additions method was used to generate 45 unique data points. Spectra were collected over the 2050-2400 nm spectral range with a 1 mm optical path length quartz cell. Reference lactate concentrations in the samples were determined by enzymatic measurements. Estimates and calibration of the lactate concentration with NIRS was made using partial least squares (PLS) regression analysis and leave-N-out cross validation on second derivative spectra. Separate calibrations were determined from each of the subject samples and cumulative PRESS was used to determine the number of PLS factors in the final model. The results from the PLS model presented are generated from the five individual calibration coefficient vectors and provided a correlation coefficient of 0.978 and a standard error of cross validation of 0.65 mmol l⁻¹ between the enzymatic assay and the NIRS technique. To study the parameters that impact the spectra baseline and the correlation between the calculated model and the data, referenced measurements of lactate against baseline spectrum were made for each individual. A correlation coefficient of 0.992 and a standard error of cross validation of 0.21 mmol l⁻¹ were found. The results suggest that NIRS may provide a valuable tool to assess physiological status for both research and clinical needs.     

A theoretical investigation into the conformational changes of dibenzo-p-dioxin, thianthrene, and selenanthrene

Theoretical ab initio calculations using the HF and B3LYP methods have been carried out to investigate the conformational differences of three cyclic rings, dibenzo-p-dioxin (DPD), thianthrene (THT), and selenanthrene (SET). The physical origin for the conformational preference of each molecule has been studied using the natural bond orbital (NBO) analysis. The NBO results indicate that DPD exists in a planar form due to strong electron delocalization caused by the specific orbital interaction, around the X atom. On the other hand, THT and SET exist as puckered forms with high inversion barriers due to less effective electron delocalization. The NBO analysis also shows that the conformational stabilization in DPD is caused by a more effective overlap of the orbitals, compared with the overlap of the orbitals in THT.