Analysis of organic compounds in environmental samples by headspace solid phase microextraction

The analysis of samples contaminated by organic compounds is an important aspect of environmental monitoring. Because of the complex nature of these samples, isolating target organic compounds from their matrices is a major challenge. A new isolation technique, solid phase microextraction, or SPME, has recently been developed in our laboratory. This technique combines the extraction and concentration processes into one step; a fused silica fiber coated with a polymer is used to extract analytes and transfer them into a GC injector for thermal desorption and analysis. It is simple, rapid, inexpensive, completely solvent-free, and easily automated. To minimize matrix interferences in environmental samples, SPME can be used to extract analytes from the headspace above the sample. The combination of headspace sampling with SPME separates volatile and semi-volatile analytes from non-volatile compounds, thus greatly reducing the interferences from non-target compounds. This paper reports the use of headspace SPME to isolate volatile organic compounds from various matrices such as water, sand, clay, and sludge. By use of the technique, benzene, toluene, ethyl-benzene, and xylene isomers (commonly known as BTEX), and volatile chlorinated compounds can be efficiently isolated from various matrices with good precision and low limits of detection. This study has found that the sensitivity of the method can be greatly improved by the addition of salt to water samples, water to soil samples, or by heating. Headspace SPME can also be used to sample semi-volatile compounds, such as PAHs, from complex matrices.     

Curing of urea-formaldehyde resins on awood substrate

TG-DTA analysis method was used to study the curing behaviour of urea-formaldehyde (UF) adhesive resins in the presence of a wood substrate. The cure process was followed using a Setaram labsys^TM instrument in flowing nitrogen atmosphere by varying the ratio of resin and wood. Resin cure was catalysed with 2% of NH₄Cl. Curing tests were performed in the open standard platinum crucibles and in the sealed glass capsules. To characterise the reactivity of curing system, the peak temperatures in DTA curve and the mass loss values in TG curve were taken as the apparent indices. The main attention was paid to phenomena which actually take place in curing of UF resins during manufacturing of particleboards. Reactivity of the curing system depends mostly on methylol content of resin and can be adequetly evaluated by the maximum temperature of exothermic peak. The wood substrate has a substantial influence on the resin and water diffusion in system causing the changes in water/resin separation and water evaporation conditions. The water movement in curing adhesive joint was a confusing parameter in determining the peak positions. The rate of mass loss on a wood substrate is higher as compared to curing UF resin alone.     

The nonsymmetric pressure tensor in polyatomic fluids

Nonequilibrium molecular dynamics calculations are used to show that polyatomic fluids can support antisymmetric stress. In a homogeneous system where the time dependence of vorticity is a step function, it is shown that the rate at which intrinsic angular velocity approaches its steady-state value ( = 1/2 × u) is determined by the magnitude of the antisymmetric part of the pressure tensor.     

Scanning electron microscopic studies on different habits of gel grown doped manganese carbonate crystals

The effect of impurities on the growth of manganese carbonate crystals has been studied. Stereophotogrammetric analysis showed that all crystal faces have the same Miller indices and the peanut-shaped forms are twins with twin axis 0001.     

Stability theorems for infinitely constrained mathematical programs

The primary concern of this paper is to investigate stability conditions for the mathematical program: findx E ⁿ that maximizesf(x):g ^j(x)0 for somej J, wheref is a real scalarvalued function and eachg is a real vector-valued function of possibly infinite dimension. It should be noted that we allow, possibly infinitely many, disjunctive forms. In an earlier work, Evans and Gould established stability theorems wheng is a continuous finite-dimensional real-vector function andJ=1. It is pointed out that the results of this paper reduce to the Evans-Gould results under their assumptions. Furthermore, since we use a slightly more general definition of lower and upper semicontinuous point-to-set mappings, we can dispense with the continuity ofg (except in a few instances where it is implied by convexity assumptions).     

对全入射角负折射二维光子晶体结构和电磁参量的研究

利用二维光子晶体的等频线分析原理和平面波展开方法,得到了使二维光子晶体产生全入射角负折射(All-Angle Negative Refraction,AANR)现象时,入射电磁波的频率取值范围.同时,分析了AANR频率范围随着结构参量(晶格类型、介质棒半径与晶格周期的比值)和电磁参量(介质柱介电常量、本底介电常量、入射电磁波偏振方向)变化的行为.结果表明:固定组成光子晶体的一种介质的介电常量,另一介质的介电常量只有达到一定阈值,才有可能使光子晶体出现AANR现象.在给定两种介质介电常量的条件下,存在使AANR频率范围最大化的结构参量和电磁参量.     

能量选择中子成像技术及其应用

能量选择中子成像技术是利用特定范围波长(能量)的中子进行成像。在热/冷中子范围内(<25meV),能量选择中子成像技术主要基于布拉格边效应和衍射机制,相比常规中子成像技术不但可以显著提高图像对比度,而且能分析应变、应力、织构。在超热中子范围内(>1eV),能量选择中子成像技术主要基于中子共振吸收,中子截面随能量变化是同位素特有的,存在明显的共振吸收峰,因此可以进行同位素的“指纹”识别。能量选择中子成像技术在工程、材料、化学、物理、生物、考古等众多科研领域中有着非常广阔的应用前景。     

激光诱导击穿光谱(LIBS)技术在低碳钢铁冶金行业的应用

激光诱导击穿光谱技术(Laser induced breakdown spectroscopy,简称LIBS)是一种基于激光等离子体的发射光谱技术,具有样品制备简单,分析迅速,多元素同时分析,现场在线和远程分析等独特优势,已在钢铁冶金领域取得了越来越广泛的应用与发展。综述了近年来LIBS技术在钢铁冶金领域的应用研究进展,从冶金生产的全流程进行介绍,包括矿石、熔融钢水/铁水、钢铁产品及炉渣和废气分析。同时,还总结了LIBS技术在钢铁冶金领域应用的优点和缺点,并对该技术的应用前景及未来发展方向进行展望。     

地外样品研究中电子探针元素面扫描分析技术的应用

由于月壤等地外样品十分珍贵,在实验室研究中优先使用原位、微区、无损的元素分析方法。电子探针元素面扫描是地外样品研究中常用的分析方法之一。该方法可获取样品整体或者感兴趣区域的多种元素分布数据,应用于矿物相识别与含量估算,锆石等定年矿物的快速定位,矿物环带、出溶、反应边结构等特殊岩相和矿物接触关系等分析和研究。本研究中以嫦娥五号月壤、月球陨石、火星陨石研究为例,介绍了目前元素面扫描的应用方法。此外,本文还对比、分析了电子探针面扫描技术与其它面扫描技术的优缺点和适用范围。未来十年,我国将实施一系列月球、火星、小行星等天体采样返回任务。电子探针元素面扫描分析未来将在这些地外样品研究中广泛使用。同时,建议行星科学家围绕所关心的科学问题,合理搭配多种分析方法以实现各种技术优势互补和样品科学价值最大化,服务我国月球与深空探测任务科学产出和行星科学发展。     

桑白皮中21种无机元素的测定及其质量评价

为准确了解不同产区桑白皮中多种元素分布及含量情况,用65%硝酸溶液对其样品进行微波消解处理,后采用电感耦合等离子体质谱（ICP-MS/MS）法测定桑白皮样品中21种元素的含量。得到21种元素的线性关系良好,R2 > 0.999,方法学考察试验的RSD均小于3%,加样回收率在91.32%~108.84%之间,RSD均小于4%;Al、Ga、Sr、Ba相比而言含量较大,且不同产区的特异性较明显;主成分分析中17批样品得到4个主成分,累计方差贡献率达 87.380%,确定V、Co、Al、Li、As、Se、Pb、U、Zn、Cr、Cd、Ga、Ba、Cs、Ni等15种元素为桑白皮药材的特征元素;相关性分析可知,元素间的相关性较强, P≤0.05的元素与主成分分析的特征元素基本一致。参照2020年版《中国药典》中对中药材中有害元素的限量规定,发现桑白皮样品中Pb、Cd、As、Cu有害元素的含量均未超过限量要求。ICP-MS/MS能准确快速测定桑白皮中21种元素含量情况,这对评价不同产区桑白皮质量,完善桑白皮质量标准具有一定参考价值。