增容剂对聚丙烯/粘土纳米复合材料热分解动力学的影响

采用三单体固相接枝聚丙烯作为增容剂制备了聚丙烯粘土纳米复合材料.通过XRD和TEM表征了其纳米结构.利用动态TGA方法研究了聚丙烯和纳米复合材料的热稳定性.分别采用Flynn Wall Ozawa和Kissinger法研究了聚丙烯及其纳米复合材料的热分解动力学.结果都表明,蒙脱土的加入明显提高了聚丙烯的起始热分解温度,纳米复合材料热失重10%时的温度比聚丙烯提高40K左右;纳米复合材料的热分解温度区间明显比聚丙烯的窄;纳米复合材料热分解表观活化能明显增大,与聚丙烯相比提高50%以上.     

Thermal decomposition of ammonium vanadyl oxalate supported on various oxides

The thermal decomposition of ammonium vanadyl oxalate supported on La₂O₃, MgO, SiO₂, Al₂O₃, ZrO₂, TiO₂, SAPO-5, and ZSM-5 oxides in a dynamic atmosphere of dry air was compared by thermal gravimetric analysis (TG) and differential thermal analysis (DTA). The calcined catalysts were characterized by X-ray diffractometry (XRD). The TG and DTA results demonstrate that the surface acid-base properties of the oxides play a significant role in the decomposition behaviour of the supported ammonium vanadyl oxalate, i.e. the basic oxides exhibit an endothermic effect and the acidic oxides show an exothermic effect. Two mechanisms are suggested for thermal decomposition of ammonium vanadyl oxalate on basic and acidic oxides, respectively. After transformation of the ammonium vanadyl oxalate to vanadia, subsequent rearrangement of the vanadia on the surface of the supports was also observed. During the thermal treatment or calcination in air, solid state reactions of vanadia with the surface of oxides such as La₂O₃, ZrO₂ and TiO₂ took place to form new phases.     

Applicability of glass fiber as a support material for generation of gaseous standard mixtures using thermal decomposition of the surface compound. Calibration of analytical equipment

The use of glass fiber as a support material for a surface compound serving to generate gaseous standard mixtures of ethene is described. The technique is based on the process of thermal decomposition of the surface compound in a desorber connected on‐line via a multi‐port valve to the calibrated device. The surface compound undergoes thermal decomposition at 245°C, yielding known amounts of ethene. The method enables on‐line preparation of a standard mixture immediately before the calibration step. Consequently, it can be also applied for the generation of standard mixtures containing volatile, malodorous, unstable, and toxic compounds.     

Na3Fe(C2O4)3·5H2O的热解过程和FAB-MS断裂规律

以红外光谱法为主要手段，原位“跟踪”测定铁（Ⅲ）与乙二酸形成的配合物Ｎａ３Ｆｅ（Ｃ２Ｏ４）３．５Ｈ２Ｏ的热解过程，分析了气、固相热解产物。并以色谱分析、差热－热重分析和Ｘ－射线粉末衍射法定性、定量地验证其结果。测定了该配合物快原子轰击质谱，提出了断裂规律。铁的二元羧酸配合物的质谱尚属首见。     

CaO和NaCl焙烧混合稀土精矿过程中的分解反应

用XRD和TG-DTA热分析技术, 研究了含独居石和氟碳铈镧矿的混合稀土精矿在100～1000 ℃焙烧过程中, 添加CaO, NaCl时, REPO4和REFCO3的分解反应. 研究结果表明: 不添加CaO和NaCl时, 仅在377～450 ℃范围内存在REFCO3的分解反应, 其产物是REOF, RE2O3, 以及Ce2O3进一步的氧化产物CeO2, 而REPO4不分解; 添加CaO后在660～750 ℃之间, CaO有3种分解作用: (1) CaO分解REPO4, 其产物是RE2O3和Ca3(PO4)2. (2) CaO分解REOF, 其产物是RE2O3和CaF2. (3) CaO和REOF的分解产物CaF2共同作用分解REPO4, 其分解产物为RE2O3, Ca5F(PO4)3; 添加CaO, NaCl后, 混合精矿的分解率明显提高, NaCl的作用是为反应体系提供了液相, 促进了固相反应物间的传质过程, 加快了反应速度. 与此同时NaCl还可能参加了CaO分解REPO4的反应.     

Plasma-Catalytic Decomposition of Phenols in Atmospheric Pressure Dielectric Barrier Discharge

This study investigated the processes for the destruction of phenol and its derivatives (resorcin and pyrocatechol) in aqueous solutions under the action of an oxygen dielectric barrier discharge (DBD) at atmospheric pressure in the presence or absence of catalysts in the plasma zone. It was shown that the DBD had a high decomposition efficiency for phenol and its derivatives (up to 99%). Phenol was the most stable and pyrocatechol was the least. In a plasma-catalytic hybrid process, the effective rate constants for phenol, resorcin and pyrocatechol decomposition were 11, 4 and 2.5 times higher, respectively, than those for the DBD treatment without catalysts. The process also resulted in a 1.4, 1.6 and 1.2 times higher rate of carboxylic acid formation for phenol, resorcin and pyrocatechol, respectively. The fractional conversion into the respective carboxylic acids reached 56% for phenol and 68% for resorcin and pyrocatechol.     

Influence of Gas Atmosphere on Removal of Sulphate Groups From Titanium Oxide

The studies were devoted to determination of the effect of gas atmosphere and its pressure on the second step of decomposition of hydrated titanium dioxide (HTD) promoted by sulfate groups. It has been found that thermal decomposition of HTD at temperatures above 300°C consists of a number of processes such as dehydroxylation, desulfuration, recrystallization and sintering of solid grains, photochemical processes (if the decomposition proceeds in the presence of light) and adsorption of gas phase components (in the presence of air or SO₂). Kinetic parameters characterizing this step of decomposition have been determined for processes carried out in vacuum and in argon or air atmospheres (at a pressure of 13.33hPa). The kinetic curves of decomposition carried out in the presence of gases capable of being adsorbed on the surface of partly dehydrated HTD are featured by local extrema due to simultaneous processes of decomposition and adsorption of gas components. This revised version was published online in August 2006 with corrections to the Cover Date.     

A Study on Thermal Decomposition of K_3[Fe(CN)_6] and KFe[Fe(CN)_6] in Helium

K3 [Fe(CN)6] and KFe[Fe(CN)6] are classical coordination compounds. However, the mechanism of decomposition reactions has not been well expounded. The gas products of thermal decomposition were examined by gas chroma tography (GC) , and the structure of the solid products by Mossbauer spectroscopy(MS) and X-ray diffraction(XRD). The findings are explained in terms of the theory of coordination chemistry and a decomposition mechanism is proposed in this study. On the basis of various experimental results, the first stage of the decomposition of K3[Fe(CN)6] in He was found to be the evolution of(CN)2 resulting in the reduction of Fe(Ⅲ)12K3 [Fe(CN)6]→9K4[Fe(CN)6] + Fe2 [Fe(CN)6] + 6 ( CN )For KFe [Fe(CN) 6 ], the first stage of decomposition man be represented as6KFe[Fe(CN)6]→3K2Fe[Fe(CN)6] + 2Fe2[Fe(CN)6 + 3(CN)2At higher temperatures, the decomposition of both K3[Fe(CN)6) andKFe[Fe(CN)6] to form KCN and Fe2C was accomplished by the release of(CN)2 and N2.     

Some triplet energy-transfer reactions initiated by photoexcitation of triplet excited state of dibenz[a,h]anthracene to the higher triplet excited states

Some triplet energy-transfer reactions initiated by photoexcitation of the triplet excited state of dibenz[a,h]anthracene to higher triplet excited states (DBA(T_n)) were observed in the presence of the triplet energy quenchers (Q) such as naphthalene, biphenyl, p-dichlorobenzene, and o-dicyanobenzene. In the case of carbon tetrachloride (CCl₄) as Q, DBA(T_n)-sensitized decomposition of CCl₄ occurred.