Fabrication of high-performance nickel/graphene oxide composite coatings using ultrasonic-assisted electrodeposition

Ultrasonic-assisted electrodeposition was used to fabricate the nickel/graphene oxide composite coatings with high hardness, low friction coefficient, and high wear resistance. In the present study, the effects of ultrasonic power and concentration of graphene oxide on the mechanical and tribological properties of the electrodeposited nickel/graphene oxide composite coatings were systematically studied. X-ray diffraction (XRD) analyses showed that the crystallite size of the nickel decreased with an increase of ultrasonic power (0–50 W, 40 KHz, square wave) and concentration of graphene oxide (0.1–0.4 g/L). Morphologies of the surface and cross-section of the composite coatings observed by Scanning Electron Microscopy (SEM) confirmed the existence of graphene oxide particles in the nickel matrix. The results from microhardness measurement demonstrated that the hardness was increased by 1.8 times using 50 W ultrasonic-assisted electrodeposition with the fixed concentration of graphene oxide (0.1 g/L), compared to the pure nickel coating. The hardness was increased by 4.4 times for the 0.4 g/L graphene oxide with the optimized ultrasonic power of 50 W in comparison to the pure nickel coating. Meanwhile, the friction coefficient decreased gradually with an increase in ultrasonic power and concentration of graphene oxide, respectively, where the effect of the concentration of graphene oxide played a more important role.     

双涂层光纤应变传感器的理论与实验研究

对带有聚合物涂敷层和缓冲层的光纤应变传感器的力学特性进行了研究,建立了双涂层光纤与基体材料相互作用的线弹性理论模型.理论研究表明：在小半径近似条件下,双涂层光纤的力学传递特性决定于涂覆层和缓冲层的弹性模量的相对值;当缓冲层的弹性模量远大于涂覆层时,其作用可忽略.实验中,将光纤传感器埋入基体材料内部,利用白光干涉应变测量方法,对平均应变传递系数进行了实验研究.实验结果与理论仿真具有较好的一致性.     

双硫腙包覆钛酸锶钡粉体对水中铅的吸附行为

用草酸化学共沉淀法合成了钛酸锶钡(BST)粉体, 以双硫腙为表面修饰剂, 采用静态浸渍法对钛酸锶钡粉体进行表面包覆修饰, 制备出新型固态粉体吸附剂. 利用X射线衍射(XRD)、扫描电镜(SEM)和傅立叶变换红外光谱(FTIR)进行了表征. 研究了该吸附剂对水中铅的吸附行为. 结果表明: 双硫腙通过与钛酸锶钡表面羟基形成氢键作用包覆于该粉体上; 当吸附介质pH值大于4时, 该吸附剂对水中的铅有较强的吸附能力; 室温下, 5 min内吸附达到平衡. 其吸附行为符合Langmuir吸附等温模型和HO准二级动力学方程式, 吸附焓变(ΔH)为19.42 kJ•mol^－1, 活化能(E_a)为22.187 kJ•mol^－1, 该吸附过程是吸热的物理过程. 吸附在双硫腙包覆钛酸锶钡粉体上的铅, 可用1 mol•L^－1的硝酸溶液进行洗脱. 建立了吸附富集、火焰原子吸收法测定水中铅的新方法, 应用于地表水和自来水中铅的测定, 取得了令人满意的结果.     

Li3PO4包覆LiMn2O4正极材料的结构表征和电化学性能

采用共沉淀法在尖晶石LiMn2O4颗粒表面包覆Li3PO4.XRD、SEM研究结果表明,包覆后的材料仍为尖晶石结构,粒径均匀.电化学性能测试表明,Li3PO4包覆层的存在,减少了正极材料与电解液的直接接触,抑制了高温下电解液对LiMn2O4材料的侵蚀,从而有效改善了高温下材料的循环性能.在40℃时,包覆样品的比容量衰减率都低于未包覆样品,其中包覆1%Li3PO4的样品的初始比容量为110.4mAh/g,50次循环后比容量为84.1mAh/g.     

碳纳米管基复合材料研究进展

碳纳米管基复合材料具有优良的性能,已在化学、化工、材料、生物、医学等领域受到广泛关注.本文主要综述了功能材料包覆碳纳米管的制备方法及其力学、磁学、光学、电化学等性质,以及当前研究的焦点和存在的问题.     

固相微萃取涂层及其形貌特征研究

采用物理涂渍、溶胶-凝胶技术(sol-gel)制备了固相微萃取(SPME)固相涂层：),γ-Al2O3涂层、聚丙烯酸树脂涂层、聚酰亚胺-二氧化硅溶胶凝胶涂层、聚酰亚胺-二氧化钛涂层。通过扫描电镜显示涂层表面形貌,并比较了萃取容量与涂层形貌间的关系.证明涂层的微观形态结构对涂层性能具有一定的影响,可以通过微观形态分析,了解不同微观结构对宏观性质的影响。     

微波诱导等离子体热解法合成碳膜包裹的TiO2纳米微晶

微波诱导等离子体热解法合成碳膜包裹的ＴｉＯ２纳米微晶刘洪波（广东石油化工高等专科学校广东茂名５２５０００）洪品杰戴树珊（云南大学化学系云南昆明６５００９１）关键词微波诱导等离子体包裹碳膜ＴｉＯ２纳米微晶中图分类号Ｏ６１４．４１１近年来，对碳膜包裹型材...     

Keggin型杂多酸在镀锌钝化中的应用

比较了H_4SiMo_(12)O_(40)、H_3PW_(12)O_(40)、H_4SiW_(12)O_(40)、H_3PMo_(12)O_(40)及铬酸盐对镀锌层钝化效果。H_3PMo_(12)O_(40)钝化的最佳条件为:H_3PMo_(12)O_(40)5g/L,pH 1.1,钝化时间35秒,温度15℃,空留时间10秒,封闭温度100℃(水)。经扫描电镜、XPS、AES、IR和Raman光谱等测定,表明在锌表面形成了一种含有P、Mo、O及Zn的耐蚀性膜。其中钼以Mo(Ⅵ)、Mo(Ⅴ)和Mo(Ⅳ)存在,P/Mo比为1:3.0。推测锌表面形成了一种形如Zn_x(PMo_3)_rO_z/ZnO/Zn的复杂钝化膜。     

Preparation of thin SnO2 layers by inorganic sol-gel process

SnO₂ sols were prepared in the following way: (1) precipitation of metastannic acid with aqueous ammonia from aqueous solutions of SnCl₄, (2) washing the precipitates with NH₄NO₃ solution and water, (3) peptization of precipitates in water, sometimes with an addition of HNO₃, at elevated temperature using mechanical stirring. In those sols, sometimes diluted with water or ethanol, substrates (glass or silica derived wafers) were dipped and withdrawn at various rates. Gel coatings were converted into crystalline SnO₂ by thermal treatment at 600°C. Coatings with thickness between 300–2000 Å were prepared.     

Fe3O4磁性纳米粒子的超声包金及其表征

超声条件下, 在乙醇分散的3-氨丙基三乙氧基硅烷(APTES)功能化的磁性Fe₃O₄纳米粒子和四氯合金酸的混合溶液中滴加柠檬酸钠, 成功地制备了磁性Fe₃O₄/Au复合纳米粒子. 采用X射线粉末衍射仪(XRD)、紫外吸收可见光谱(UV-Vis)、带有电子能谱仪(EDS)的扫描电子显微镜(SEM)、透射电子显微镜(TEM)、光电子能谱(XPS)、超导量子干涉仪(SQUID)等方法, 对复合粒子的形态、结构、组成以及磁学性质进行了表征. 结果表明: 在此条件下制得的复合粒子粒径在30 nm左右, 室温下磁化强度可达63 emu/g.