Capillary zone electrophoresis of proteins applying ionic liquids for dynamic coating and as background electrolyte component

The use of ionic liquids in capillary electrophoresis, either as coating material or as components of the background electrolyte needs systematic standardization to set up optimal conditions. Excellent separation of the proteins was achieved using 1-ethyl-3-methylimidazolium tetrafluoroborate ([emim][BF₄]) or 1-butyl-3-methylimidazolium tetrafluoroborate ([bmim][BF₄]) ionic liquids using the properly made ionic-liquid–water binary mixtures for the experiments. The binary mixture has a distinctly stable and well perceptible low pH, which depends on the concentration of the ionic liquid, and on the preparation time of the mixture. Optimal conditions for the electrophoretic separation were obtained upon a multivariate analysis of the experimental parameters (applied voltage, migration time, concentration, and type of the ionic liquid). The standardized condition provides a low electroendosmotic flow toward the anode, which, however, did not hinder the proteins to migrate toward the cathode. The migration of cytochrome c, lysozyme, myoglobin, trypsin, and apo-transferrin at a pH around 2, far below the isoelectric points of the proteins, showed RSD values of the migration times less than 7.5% and less than 6.5% when using [emim][BF₄] or [bmim][BF₄], respectively, either in run-to-run or day-to-day experiments. The determination of the extent of the EOF is not possible with the commonly used EOF markers, due to interaction with the ionic-liquid constituents. The interaction of the ionic liquids with the proteins influences the migration order in zone electrophoresis. This method has been applied successfully for the analyses of real biological samples such as proteins from egg whites and human tears.     

氮化硼纳米片在重防腐涂层中的应用进展

氮化硼纳米片也被称为“白色石墨烯”,是一种重要的纳米填料,具有优异的机械性、导热性、耐磨性、阻隔性、疏水性,同时也是一种新兴的性能优良的绝缘材料.被广泛应用于重防腐涂层、润滑剂、传感器等领域.基于氮化硼纳米片在金属腐蚀防护领域巨大的应用前景,本综述将从氮化硼纳米片的制备及表面官能化、氮化硼薄膜防护涂层、氮化硼纳米片/有机防护涂层、氮化硼纳米片-无机复合材料/有机防护涂层这四部分进行系统总结,重点围绕氮化硼纳米片在有机涂层中均匀分散能力以及金属腐蚀防护能力等方面等进行详细分析和介绍,同时对氮化硼纳米片基防腐涂料未来发展进行了展望.     

磷酸锂原位包覆富锂锰基锂离子电池正极材料

本工作通过“碳酸盐共沉淀-沉淀转化-固相反应”方法,实现磷酸锂原位包覆和改性富锂锰基锂离子电池正极材料Li_1.2Mn_0.54Co_0.13Ni_0.13O₂,研究了磷酸锂包覆层的形成过程及其对电化学性能的影响.结果显示,碳酸盐前驱体经沉淀转化反应原位形成磷酸镍包覆层,与锂源混合煅烧,最终转化为厚度小于30 nm的磷酸锂包覆层.该材料组装的半电池在125 mAh·g^-1电流密度下循环175圈后容量达191.1 mAh·g^-1,容量保持率为81.8%,平均每圈电压衰减仅为1.09 mV.磷酸锂包覆层缓解了材料表面与电解液之间的副反应,抑制了不可逆相变和过渡金属溶出,同时磷酸锂作为锂离子导体促进锂离子传输.本工作表明沉淀转化法原位包覆磷酸锂是提升富锂锰基正极材料性能的有效途径.     

不同色浆质量分数的水性聚氨酯涂料对聚氯乙烯表皮低温爆破性能的影响

本文制备了一系列不同色浆质量分数的水性聚氨酯涂料,并将其喷涂在汽车仪表板聚氯乙烯(PVC)表皮的背面形成复合材料。 用旋转流变仪表征了涂料的粘度以评价其喷涂性能;用差示扫描量热仪表征了材料的玻璃化转变温度(T_g);利用万能材料试验机表征了材料在-30 ℃条件下的拉伸性能及抗撕裂性能;用动态热机械分析仪表征了材料的损耗比随温度的变化。 结果表明:不同色浆质量分数的涂料都能喷涂,含有涂层材料PVC表皮在-30 ℃低温爆破性能与涂层材料的T_g、低温拉伸性能、抗撕裂性能的关系并不大,而与涂层材料的阻尼性能直接相关。 材料的阻尼性能越好,其低温爆破性能越好。     

高稳定性水系锌离子电池正极材料MnO2@MgO的制备与性能

采用共沉淀法和热分解法合成了具有核壳结构的MnO2@MgO微球。通过X射线衍射(XRD)、扫描电子显微镜(SEM)、透射电子显微镜(TEM)等手段对材料进行表征,结果发现包覆MgO不改变MnO2的结构,包覆层由纳米颗粒组成,厚度约为50 nm。电化学性能结果显示,包覆后材料的放电比容量明显提高,在100 mA·g^-1电流密度下,最大放电比容量为274.3 mAh·g^-1,比未包覆材料提高了12.8%。在1000 mA·g^-1电流密度下经过500次循环后,包覆后材料的放电比容量保持率高达84.1%,表现出优异的循环稳定性。MgO包覆层的存在避免了MnO2与电解液之间直接接触,抑制了电极材料在充放电过程中锰的溶解,从而显著提高MnO2的循环性能。     

Recent advances in biodegradable matrices for active ingredient release in crop protection: Towards attaining sustainability in agriculture

Climate changes, emerging species of plant pests, and deficits of clean water and arable land have made availability of food to the ever-increasing global population a challenge. Excessive use of synthetic pesticides to meet ever-increasing production needs has resulted in development of resistance in pest populations, as well as significant ecotoxicity, which has directly and indirectly impacted all life-forms on earth. To meet the goal of providing safe, sufficient, and high-quality food globally with minimal environmental impact, one strategy is to focus on targeted delivery of pesticides using eco-friendly and biodegradable carriers that are derived from naturally available materials. Herein, we discuss some of the recent approaches to use biodegradable matrices in crop protection, while exploring their design and efficiency. We summarize by discussing associated challenges with the existing approaches and future trends that can lead the world to more sustainable agricultural practices.     

酶提取-单颗粒电感耦合等离子质谱法分析樱桃番茄纳米银颗粒及其吸收规律研究

为探究复合保鲜涂膜中AgNPs的迁移情况,采用酶提取的前处理方式,结合单颗粒电感耦合等离子体质谱（SP-ICP-MS）,考察了前处理方式、驻留时间、校准方式以及Ag+浓度等条件对AgNPs准确测定的影响。结果表明：0.1 g樱桃番茄样品在柠檬酸盐体系下使用0.2 g的R-10离析酶可达到消解最适酶剂量;当驻留时间小于100 μs时,测定结果有较好的积分条件以及较高的信背比;采用AgNP尺寸方式进行校准比单独用Ag+标准溶液校准方式的颗粒尺寸测定结果更加准确。采用该方法测定樱桃番茄中加标AgNPs颗粒回收率达到88.9%,粒径实测值为47.8±0.3 nm,粒径检出限为13 nm,颗粒浓度检出限为 7.5×104 particles/L。通过将樱桃番茄暴露于AgNPs涂膜中来探究AgNPs迁移行为,复合保鲜涂膜后的樱桃番茄通过三次洗涤后能够在表面去除大部分AgNPs,但仍有少量AgNPs穿过果表皮浸入果肉组织。该方法灵敏度高,操作简单,能够为揭示AgNPs在农产品及农业生产中的风险提供可靠、准确的表征方法。     

水溶性ZnO量子点制备及其光学性质

利用3-巯丙基三乙氧基硅烷对ZnO进行表面修饰后沉积SiO2, 制备出水溶性SiO2包覆ZnO的量子点. 与直接采用正硅酸乙酯沉积包覆SiO2的ZnO量子点相比, 362 nm处的激子荧光发射峰的强度提高了将近4倍. 由于表面引入了巯基官能团, 量子点的水溶性明显提高, 稳定性增强, 即使在较高的盐浓度下也不会团聚. 通过改变条件, 制备出了发光波长在420 nm的蓝色荧光量子点.     

Spray Deposition Synthesis of Locally Ordered Mesoporous Polycrystalline Titania Films at Low Temperature

A low-temperature spray deposition synthesis was developed to prepare locally hexagonally ordered mesoporous titania films with polycrystalline anatase pore walls in an evaporation-induced self-assembly process. The titania film preparation procedure is conducted completely at temperatures below 50 °C. The effects of spray time, film thickness, synthesis time prior to spray deposition, and aging time at high relative humidity after deposition on the atomic arrangement and the mesoorder of the mesoporous titania were studied. We find the crystallite size to depend on both the synthesis time and aging time of the films, where longer times result in larger crystallites. Using the photocatalytic activity of titania, the structure-directing agent is removed with UV radiation at 43–46 °C. The capability of the prepared films to remove the polymer template increased with longer synthesis and aging times due to the increased crystallinity, which increases the photocatalytic efficiency of the titania films. However, with increasingly longer times, the crystallites grow too large for the mesoorder of the pores to be maintained. This work shows that a scalable spray coating method can be used to prepare locally ordered mesoporous polycrystalline titania films by judiciously tuning the synthesis parameters.     

双涂层光纤应变传感器的理论与实验研究

对带有聚合物涂敷层和缓冲层的光纤应变传感器的力学特性进行了研究,建立了双涂层光纤与基体材料相互作用的线弹性理论模型.理论研究表明：在小半径近似条件下,双涂层光纤的力学传递特性决定于涂覆层和缓冲层的弹性模量的相对值;当缓冲层的弹性模量远大于涂覆层时,其作用可忽略.实验中,将光纤传感器埋入基体材料内部,利用白光干涉应变测量方法,对平均应变传递系数进行了实验研究.实验结果与理论仿真具有较好的一致性.