Preliminary selection of clay minerals for the removal of pharmaceuticals,bisphenol A and triclosan in acidic and neutral aqueous solutions

Pharmaceuticals, personal care products and endocrine disruptors demonstrate huge potential to cause adverse ecological health effects at very low concentration in aquatic environment. There is a need to improve current purification technologies used in sewage and drinking-water treatment plants. This article aims at providing new insights into the recent development of natural and modified clay-based sorbents for the removal of aqueous contaminants such as pharmaceuticals and personal care products. The removal of six widely used pharmaceuticals: ibuprofen, diclofenac, ketoprofen, carbamazepine, as well as endocrine disrupting chemicals – bisphenol A and a bactericidal agent, triclosan – was examined by sorption onto eight adsorbents. Sorption was performed using natural and modified clay minerals – montmorillonite (Mt), vermiculite (VER), bentonite (B), kaolinite (K), commercial acid activated montmorillonites K10 and K30, and two carbonaceous-mineral nanocomposites, MtG5%T, BAlG3%C. This study showed that among the tested natural clays, vermiculite is the most promising sorbent for the removal of pharmaceuticals in purification processes. Among the modified clay minerals, the best results were achieved for carbonaceous bentonite and two acid activated montmorillonites K10 and K30. However, the removal of acidic pharmaceuticals on montomorillonite K10 and carbonaceous bentonite was strongly dependent on the pH value. In the case of vermiculite and acid-modified montmorillonite K30, the sorption of the selected compounds was not significantly affected by pH, which is crucial in wastewater treatment. The sorption constant divided by the specific surface area (K_d/A) is proposed to assess whether the surface area or chemical properties of the materials control the sorption process. K_d/A values were relatively high in the case of vermiculite, so it should be noticed that individual and specific surface properties of vermiculite were of crucial importance for sorption.     

Influence of polymer reprocessing cycles on the microstructure and rheological behavior of polypropylene/mineral oil oleogels

The overall objective of this work was to study the effect of reprocessing cycles of isotactic polypropylene (PP) on the rheological behavior and microstructure of gel-like dispersions in mineral oil. PP was subjected to 10 reprocessing cycles and oleogel samples were further prepared by using the mixing rheometry technique and characterized from a rheological point of view and polarized light optical microscopy (PLOM). Recycled polymer samples were also characterized by means of rheological measurements, differential scanning calorimetry (DSC) and thermogravimetric analysis (TGA) to evaluate the property changes induced by reprocessing. The values of different linear viscoelastic functions (elastic modulus and complex viscosity) of recycled PP decrease with the number of reprocessing cycles, which influences oleogel rheological response. An empirical exponential correlation between the storage modulus (G′) of PP samples and the plateau modulus ($G_N^o$) of oleogels has been proposed to predict the rheological behavior of oleogels. Results were explained considering the scission of PP chains induced by the thermomechanical reprocessing treatment applied.     

球形封闭容器内一个简单的煤粉燃烧爆炸模型

在分析了大量球形封闭容器内煤粉燃烧爆炸实验数据基础上，考虑了煤粉燃烧爆炸机理所涉及的湍流燃烧、相变、各种化学反应动力学过程等复杂因素，并且对球形封闭容器内由于煤粉混合不均匀造成的燃烧不充分给予了考虑，得到了球形封闭容器内煤粉燃烧爆炸特征的数值计算结果，计算的压力－时间曲线与实验结果符合较好。     

Wavelength-dispersive spectral analysis and quantification of monazites by electron-probe microanalysis

The problem of determining the chemical composition of monazite grains through electron probe microanalysis is studied, by using a scanning electron microscope with a wavelength dispersive spectrometer. A careful qualitative analysis is performed with the purpose of determining all the elements present in the samples, the lines to be used in the quantifications trying to minimize interferences, the angular positions and the acquisition times for the measurement of peak and background intensities and the crystals to be used. Particular emphasis is devoted to the analysis of Th, U and Pb, which are used to determine the age of the rock by means of the U-Th-Pb method, commonly used in geochronology. Quantitative determinations of the chemical composition of monazite grains are performed, optimizing the experimental conditions on the basis of the qualitative analysis. The determinations were made under two different criteria of quantification of oxygen, and the dissimilar results obtained are discussed.     

Influence of rheological additives on char formation and fire resistance of intumescent coatings

Styrene-butyl acrylate copolymer based fire retardant coatings were prepared using intumescent flame-retardant additives and mineral clay type rheological additives. Three different widely used nanoclays, organic-modified montmorillonite, palygorskite and sepiolite were applied in order to determine their effect on the flame retardancy. Significant differences were found when their heat-shielding activities were evaluated. It was observed that the addition of different clay particles in amount of 0.25 w% changes the char formation process; the height, the morphology, the structure and also the mechanical resistance of the protecting shield. The different geometry and composition of the additives induced different changes in fire performance. In case of palygorskite the catalytic effect of Fe accelerated mainly the thermal decomposition, therefore the fire resistance decreased. The plate-like montmorillonite reduced the extent of the intumescent char, whereas also improved the mechanical and sustained heat resistance of the fire protecting shield. The fibrous sepiolite of low Fe content assisted the development of efficient protecting shield, which exhibited optimal cell structure, suitable thickness, and thus ensured better heat-insulating performance. Consequently, fire retardant effect of sepiolite was found to be better than the other studied clay types.     

Low-temperature structural phase transition in synthetic libethenite Cu2PO4OH

Low-temperature structural properties of the synthetic mineral libethenite Cu₂PO₄OH were investigated by single-crystal X-ray diffraction, synchrotron X-ray powder diffraction, specific heat measurements, and Raman spectroscopy. A second-order structural phase transition from the Pnnm symmetry (a=8.0553(8) Å, b=8.3750(9) Å, c=5.8818(6) Å at 180 K) to the P2₁/n symmetry (a=8.0545(8) Å, b=8.3622(9) Å, c=5.8755(6) Å, β=90.0012(15) at 120 K) was found at 160 K during cooling. At 120 K, the monoclinic angle is 90.0012(15) from single crystal X-ray data vs 90.083(1) from powder X-ray diffraction data. The P2₁/n–to–Pnnm transition may be a general feature of the adamite-type compounds, M₂XO₄OH.     

Determination of polycyclic aromatic hydrocarbons from ambient air particulate matter using a cold fiber solid phase microextraction gas chromatography-mass spectrometry method

Polycyclic aromatic hydrocarbons (PAH) from ambient air particulate matter (PM) were analyzed by a new method that utilized direct immersion (DI) and cold fiber (CF) SPME-GC/MS. Experimental design was used to optimize the conditions of extraction by DI-CF-SPME with a 100μm polydimethylsiloxane (PDMS) fiber. The optimal conditions included a 5min equilibration at 70°C time in an ultrasonic bath with an extraction time of 60min. The optimized method was validated by the analysis of a NIST standard reference material (SRM), 1649b urban dust. The results obtained were in good agreement with certified values. PAH recoveries for reference materials were between 88 and 98%, with a relative standard deviation ranging from 5 to 17%. Detection limits (LOD) varied from 0.02 to 1.16ng and the quantification limits (LOQ) varied from 0.05 to 3.86ng. The optimized and validated method was applied to the determination of PAH from real particulate matter (PM10) and total suspended particulate (TPS) samples collected on quartz fiber filters with high volume samplers.     

模拟酸雨条件下浙江省金华市城市灰尘重金属的解析状况探究

通过网格采样法,采集了金华市一环线以内地区的20个城市灰尘样品,然后利用原子吸收分光光度计测定了城市灰尘重金属Zn、Cu、Cr和Pb在不同pH的模拟酸雨溶液浸提下的析出值,并采用地积累指数法对各重金属有效性的状况做出了评价。结果表明,研究区域内,城市灰尘重金属Zn、Vu、Cr和Pb在酸雨背景下的析出值分别处于清洁水平、轻污染水平、中等污染水平和偏中等污染水平,该区城市灰尘有效Cr和有效Pb的污染程度较高,值得关注与采取措施进行预防与整治。     

矿尘影响下生态系统脆弱性级联传播模型分析

为了解决矿尘连续排放并迁移对地表生态系统造成的脆弱性问题,提出了基于函数地理Petri网的脆弱性级联传播模型。综合考虑污染物迁移方向和生态环境在地理空间上的关联关系,直观地构造了基于级联传播的污染Petri网。在此基础上,定义了基于VCPM的脆弱度和阈值的概念,利用两者的关系进行脆弱性级联传播分析,从而明确级联传播的三种状态。最后,以神府煤田矿尘迁移作为污染物连续排放的污染源,通过模型方法的模拟仿真分析,对生态环境系统在级联传播下的脆弱性进行了深入探讨。已有的研究方法和结果不仅在生态环境脆弱性研究领域做出了新的贡献,而且为环境的修复和重建提供了参考价值。     

Plasma Parameters around a Chain-Like Structure of Dust Particles in an External Electric Field

The formation of a 1D chain-like structure of dust particles in a low-temperature argon plasma was studied. A new numerical model for calculation of the self-consistent spatial distribution of plasma parameters around a chain of dust particles was presented. The model described the motion of positively charged ions in the electric potential of several negatively charged dust particles, taking into account the action of an external electric field. The main advantage of the model was that the charges of the dust particles and the interparticle distances were determined self-consistently. As a result of numerical simulations, the dependencies of the spatial distributions of the plasma parameters (the densities of electrons and ions and the self-consistent electric potential) near the dust particles chain on the strength of the external electric field, an external force acted on the last particle, and the mean free path of the ions was determined. The obtained results made it possible to describe the process of the formation of chain-like structures of dust particles in discharge plasma.