DMF体系中Cu2O球晶的制备及形貌分析

以N,N-二甲基甲酰胺(DMF)为溶剂,通过改变铜源和表面活性剂,调控反应参数,溶剂热条件下制备了三维十字形、空心及实心的Cu₂O球晶。利用XRD、SEM等表征手段,分析探讨了工艺条件变化对Cu₂O球晶形貌的影响。研究表明,随着DMF浓度的增大,体系的还原能力增强,Cu⁺增多,溶液的过饱和度增大,Cu₂O晶体集合体形态由晶体结构控制的各向异性与对称性的球晶逐渐向各向同性球晶演变。十二烷基硫酸钠(SDS)、十六烷基三甲基溴化铵(CTAB)、聚乙烯吡咯烷酮(PVP)等表面活性剂有助于降低溶液的过饱和度,增加结晶质的表面扩散能力,有利于规则形态Cu₂O晶粒的形成。反应体系中,Cu(Ac)₂·H₂O水解生成的羧基与DMF中的甲酰基在高温下发生脱羧反应产生CO₂气体以及SDS发泡作用产生的气体是形成空心Cu₂O球晶的重要原因。     

Thermodynamic studies of some 1,2,4-triazole derivatives in DMF and THF solutions at 308.15 K

Some new 1,2,4-triazole derivatives have been synthesized and characterized by TLC, IR, NMR and mass spectra. Densities, viscosities and ultrasonic velocities of these compounds have been measured over the wide composition range at 308.15?K in dimethyl formamide (DMF) and tetrahydro furan (THF). From these data, various acoustical and thermodynamic parameters (C.V. Suryanarayana, J. Kuppuswamy. J. Acoust. Soc. Ind., 4, 75 (1976); H. Erying, M.S. John, Significance of Liquid Structures, Wiley, New York (1969); G.K. Johri, R.C. Misra. Acustica, 56, 66 (1989)) were evaluated. Some of these parameters are isentropic compressibility (κ_s), intermolecular free length (L _f), relaxation strength (r), relative association (R _A), Rao's molar constant (R _m), van der Waal's constant (b), molar compressibility (W), internal pressure (π), free volume (V _f), solvation number (S _n) etc. The behavior of solutions of these compounds in DMF and THF are explained from the evaluated parameters.     

N,N-Dimethyl formamide facilitated formation of hexagonal boron nitride from boric acid

In this paper, we report on a promoting novel process for the formation of h-BN plates by using N,N-dimethyl formamide-treated boric acid (DMF-BA). Using this B source, the formation of h-BN can be indeed improved greatly compared to using pure boric acid (BA). This method effectively reduces the content of boric acid and amorphous boric oxide, enhancing the transformation rate of h-BN. For preparation of pure h-BN, it can obviously lower the resultant temperature without further purification process. Via graphitization index (G.I.) calculation and thermostability analysis, the pure h-BN plates obtained from the DMF-BA would be a promising candidate for raw material of c-BN and low-temperature applications in the air.     

最大乘积型Fuzzy文法与自动机

本文对提出的最大乘积型Ｆｕｚｚｙ文法与最大乘积型Ｆｕｚｚｙ自动机的关系作了详细讨论，得出了两个重要的结论。即：由给定的最大乘积型Ｆｕｚｚｙ正规文法可构造一个最大乘积型Ｆｕｚｚｙ自动机使得二者接受的语言集相同，反之亦然。从而达到自动识别语言的目的。     

On maximizing clique, clique-Helly and hereditary clique-Helly induced subgraphs

Clique-Helly and hereditary clique-Helly graphs are polynomial-time recognizable. Recently, we presented a proof that the clique graph recognition problem is NP-complete [L. Alcón, L. Faria, C.M.H. de Figueiredo, M. Gutierrez, Clique graph recognition is NP-complete, in: Proc. WG 2006, in: Lecture Notes in Comput. Sci., vol. 4271, Springer, 2006, pp. 269-277]. In this work, we consider the decision problems: given a graph G=(V,E) and an integer k≥0, we ask whether there exists a subset V^′⊆V with |V^′|≥k such that the induced subgraph G[V^′] of G is, variously, a clique, clique-Helly or hereditary clique-Helly graph. The first problem is clearly NP-complete, from the above reference; we prove that the other two decision problems mentioned are NP-complete, even for maximum degree 6 planar graphs. We consider the corresponding maximization problems of finding a maximum induced subgraph that is, respectively, clique, clique-Helly or hereditary clique-Helly. We show that these problems are Max SNP-hard, even for maximum degree 6 graphs. We show a general polynomial-time -approximation algorithm for these problems when restricted to graphs with fixed maximum degree Δ. We generalize these results to other graph classes. We exhibit a polynomial 6-approximation algorithm to minimize the number of vertices to be removed in order to obtain a hereditary clique-Helly subgraph.     

NMR and Excess Volumes Studies in DMF–Alcohol Mixtures

Chemical shifts of the alcohol and DMF protons in DMF–alcohol mixtures with the mole fraction of alcohol are reported in order to study the hydrogen bond interaction present in the mixtures. The densities of DMF–methanol mixture at 22°C are also measured. Excess volumes and excess chemical shifts are correlated by the Redlich–Kister equation. The relation between excess volumes and excess chemical shifts in the mixtures is discussed. It is found that the maximum excess chemical shifts ^E(CHO-OH) and ^E(CH₃-OH) are positioned at about mole fraction methanol = 0.57 for the DMF–methanol system, as is V ^E. The results show that the NMR spectral method offers a valuable approach to similar future studies of interactions in mixtures.     

Generation of anti-trenbolone monoclonal antibody and establishment of an indirect competitive enzyme-linked immunosorbent assay for detection of trenbolone in animal tissues, feed and urine

Trenbolone (TRE) is a steroid used by veterinarians on livestock to increase appetite and body weight. The use of TRE has been restricted because of its harmful side effect for consumers. To effectively control TRE residue in food and food product, a rapid and convenient immunoassay was developed by preparing an anti-TRE monoclonal antibody. The immunogen and coating antigen were prepared by coupling TRE hapten with carrier proteins via 1-ethyl-3-(dimethylaminopropyl)carbodiimide hydrochloride (EDC) method. The optimized method gave an average IC₅₀ value of 0.323 ng mL⁻¹ towards TRE and an average detection limit (LOD) of 0.06 ng mL⁻¹, which is much lower than the maximum residue levels (2.0 ng g⁻¹) accepted by the Joint FAO/WHO Expert Committee on Food Additives (JECFA). The specificity of the antibody was evaluated by measuring cross-reactivity of six structurally related compounds, including 19-nortestosterone (9.7%), testosterone (0.13%), methyltestosterone (<0.01%), methandrostenolone (<0.01%), (+)-dehydroisoandrosterone (<0.001%) and β-estradiol (<0.001%). The recovery rates of the test in detection of TRE-fortified animal tissue, urine and animal feed samples were in the range of 81.3-89.4%, while the intra- and inter-assay coefficients of variation were less than 12.0%.     

Raising the bar on-bead: Efficient on-resin synthesis of α-conotoxin LvIA

α4/7-Conotoxin LvIA is an isoform-selective inhibitor of the α3β2 nicotinic acetylcholine receptor. An efficient strategy for the synthesis of this toxin is critical to advancing its utility as a probe for receptor function and as a potential pharmaceutical lead target. On-resin methods for peptide synthesis offer potential synthetic advantages; however, strategies for on-resin formation of multiple disulfides have historically been low-yielding. Here, we harness the reactivity of the Allocam protecting group and employ a 3-amino acid spacer strategy to synthesize α4/7-conotoxin LvIA via three different on-resin strategies, each of which results in an isolated yield higher than previous fully on-resin approaches.     

Thermal Analysis of Acrylonitrile Polymerization and Cyclization in the Presence of N,N-Dimethylformamide

This paper examines the polymerization of acrylonitrile to poly(acrylonitrile)(PAN), and its cyclization, in bulk form and using N,N-dimethylformamide (DMF) as solvent in which both monomer and polymer are soluble. Thermal analysis of the resultant products after polymerization has been performed by DSC and pyrolysis gas chromatography/mass spectrometry (Py-GC/MS). Scanning electron microscopy has been used to study the morphology of the resultant products and after thermal treatments. The DSC thermal curve of PAN-DMF sample is quite different from the PAN bulk sample, showing a single sharp exothermic peak associated with nitrile group polymerization (cyclization) of PAN at lower temperature (240°C) than that of bulk PAN sample (314°C). Cyclization of PAN was confirmed by IR spectroscopy. It was found that the amide molecules are difficult to eliminate completely in the product obtained after the polymerization reaction, even after prolonged heating at 110°C, and remain occluded. The formation of a complex by dipolar bonding is also possible and it is discussed. It is concluded that the amount of heat evolved as well as the temperature interval over which it is released are influenced by the chemical processing of PAN when using DMF as solvent of both monomer and polymer. Pyrolysis of these PAN samples revealed the release of occluded molecules of DMF, and several compounds containing nitrogen produced from the thermal degradation processes. All these results are interesting to know the chemical processing of carbon fibres and activated carbon fibres from PAN modified precursors.This revised version was published online in November 2005 with corrections to the Cover Date.     

Borohydride Exchange Resin,a New Reducing Agent for Reductive Amination

A system consisting of tosyl chloride-dimethyl formamide-pyridine was found to ensure oxidation of poly(vinyl alcohol) and some molecular alcohols.