加速溶剂萃取-高效液相色谱-串联质谱法同时检测鱼肉中喹诺酮、磺胺与大环内酯类抗生素

建立了加速溶剂萃取(ASE)-高效液相色谱-串联质谱联用法同时检测鱼肉中22种抗生素药物残留的分析方法。样品经ASE提取,HLB固相萃取柱净化后进入高效液相色谱-串联质谱仪分析。对ASE的萃取条件进行优化,并采用XTerraMSC18柱对药物进行分离,以甲醇-乙腈(体积比1∶1)为色谱流动相A,以0.3%(体积分数)甲酸水溶液(含0.1%甲酸铵,pH=2.9)为流动相B。22种喹诺酮、磺胺和大环内酯类抗生素药物在加标水平为20、100μg/L时的回收率分别为72%～120%与66%～114%,相对标准偏差(RSD,n=5)分别为1.9%～16%与0.7%～10%,方法的检出限为0.02～0.6μg/kg。结果显示所建立的方法精密度好,准确度高,可满足同时对鱼肉样品中多种喹诺酮、磺胺和大环内酯类抗生素残留进行定性及定量分析的要求。     

Physical and Electrochemical Characterization of Hydrothermal Prepared α'-NaV_2O_5 Crystals

α'-NaV2O5 was prepared by a simple hydrothermal process.X-ray diffraction confirmed the orthorhombic structure of α'-NaV2O5,with preferential growth along the (001) direction.Scanning electron microscopy showed α'-NaV2O5 was composed of flake-shaped crystals.X-ray photoelectron spectroscopy confirmed the co-existence of V4+ and V5+ in α'-NaV2O5,which results in an average V4.5+ oxidation state of α'-NaV2O5.The observed Raman bands are ascribed to different V―O vibrations.α'-NaV2O5 shows a reversible specific capacity of about 100 mA·h·g-1 between 3.5 and 1.0 V,with a good capacity retention.The good electrochemical stability of the material is attributed to its structural stability during Li+ intercalation.     

新型荧光试剂用于土壤中脂肪胺的高效液相色谱-质谱测定

利用新型荧光试剂2-(2-(10-蒽基)-苯并咪唑)-乙酸(ABIA)为柱前衍生化试剂,在Akasil-C18色谱柱上,通过梯度洗脱对12种游离脂肪胺进行了分离和在线质谱定性。以乙腈为溶剂,N-乙基-N′-[(3-二甲氨基)丙基]碳二亚胺盐酸盐(EDC)为缩合剂,在50℃条件下衍生反应20 min后获得稳定的荧光产物。激发波长和发射波长分别为260 nm和430 nm,采用大气压化学电离源(APCI)的正离子模式,实现了土壤中脂肪胺的定性及其含量的测定。脂肪胺的线性相关系数大于0.9990,检出限为11.72~25.63 fmol。     

ZnO/Eu~(3+)发光材料的高温固相合成及其发光性能

采用高温固相法制备了ZnO/Eu3+红色长余辉发光材料.应用正交试验设计法(每个因素取3个水平,选用L9(34)正交试验表),以初始亮度为指标,研究了煅烧温度、Eu3+质量分数、敏化剂Li+质量分数、煅烧时间等4个因素对发光性能的影响;利用X射线衍射仪对合成的ZnO/Eu3+发光材料进行了物相分析,应用荧光分光光度计测定了样品的激发光谱和发射光谱,应用照射计测定了样品的发光特性.结果表明,当各个因素在水平范围内变化时,所制备的样品均具有ZnO晶格结构;荧光粉的主激发峰位于365 nm和458 nm处,主发射峰位于480 nm、570 nm和600 nm~640 nm,对应于Eu3+的4f和5d间的激发和发射.所确定的最佳合成条件为:煅烧温度850℃,w(Eu3+)=4%,w(Li+)=2.5%,煅烧时间3 h.     

高效液相色谱法检测畜禽肉中四环素类药物残留的条件优化

对畜禽肉中四环素类残留的检测方法进行改进,选用Na2EDTA-McIlvaine缓冲溶液作为提取液进行超声提取,经C18固相萃取小柱净化,脱溶剂后用流动相三氟乙酸-乙腈溶解,使用高效液相色谱-PDA检测器分段采集355 nm及270 nm波长下的色谱信息,对前处理方法及色谱条件进行优化。四环素、土霉素在0.01～1μg/g范围内,金霉素、多西环素在0.02～2μg/g范围内回收率为60%～85%,相对标准偏差小于5%,可以满足国家残留限量0.1～0.6μg/g的检测要求。     

大黄酸键合硅胶固定相的简便制备及色谱性能评价

以大黄酸为原料,γ-氨丙基三乙氧基硅烷(KH-550)为偶联剂,简便制备了一种新型羧基键合硅胶固定相(RBSP),并用红外光谱、热重分析及元素分析对其结构进行表征.考察了流动相中甲醇含量对键合固定相色谱性能的影响,并以含酸性、中性和碱性化合物的混合物为溶质,评价了RBSP的色谱性能.以甲醇-水为流动相,用C18柱作参比,研究了该键合硅胶作为HPLC固定相对两种大豆异黄酮化合物和几种生物碱基的分离,并对其色谱分离机理进行了初步探讨.实验结果表明,该固定相(RBSP)具有较好的反相色谱性能,同时由于键合相中含有酚羟基及酰胺基团,能为多种溶质提供作用位点,对极性化合物的分离具有明显优势,且分离速度快,可有效用于极性化合物的分离分析.     

圆盘状a-Co(OH)2的控制合成及其电化学性能

采用AAO模板及后处理方法合成了圆盘状a-Co(OH)2并研究了其电化学电容性能.在该合成方法中,先采用阳极氧化铝模板结合交流电沉积的方法获得钴纳米线,而后将其在碱液中通过溶解氧氧化生成终端产物.用红外光谱(FT-IR),X射线衍射(XRD)和场发射扫描电子显微镜(FE-SEM)表征了产物的结构和形貌;用循环伏安、恒电流充放电测试方法对其电化学性能进行了测试.此外,对圆盘状Co(OH)2的形成机理进行了初步探讨.结果表明,用此方法合成的Co(OH)2具有圆盘状形貌,属a相态,且表现出较好的电容特性.     

Computational performance and cross‐validation error precision of five PLS algorithms using designed and real data sets

An evaluation of computational performance and precision regarding the cross‐validation error of five partial least squares (PLS) algorithms (NIPALS, modified NIPALS, Kernel, SIMPLS and bidiagonal PLS), available and widely used in the literature, is presented. When dealing with large data sets, computational time is an important issue, mainly in cross‐validation and variable selection. In the present paper, the PLS algorithms are compared in terms of the run time and the relative error in the precision obtained when performing leave‐one‐out cross‐validation using simulated and real data sets. The simulated data sets were investigated through factorial and Latin square experimental designs. The evaluations were based on the number of rows, the number of columns and the number of latent variables. With respect to their performance, the results for both simulated and real data sets have shown that the differences in run time are statistically different. PLS bidiagonal is the fastest algorithm, followed by Kernel and SIMPLS. Regarding cross‐validation error, all algorithms showed similar results. However, in some situations as, for example, when many latent variables were in question, discrepancies were observed, especially with respect to SIMPLS. Copyright © 2010 John Wiley & Sons, Ltd.     

Thermal cured epoxy resins using certain calixarenes and their esterified derivatives as curing agents

The acetyl esterified calixarene (CA) derivatives were prepared from calix[4]resorcinarene (CRA), and p‐tert‐butylcalixarene (BCA[n], n = 4, 6, 8), respectively. Using these CA derivatives as curing agents, the thermal curing reactions of two multifunctional epoxy resins (jER 828, 186 g/equiv., and ESCN, 193.7 g/equiv.) were investigated. The temperatures of glass transition (T_g) and decomposition (T) were measured by DSC and TGA, respectively. Based on the yields, T_gs, and T_ds of the thermal cured jER 828 epoxy resin with CRA‐E100, the curing conditions were optimized to be tetrabutylphosphonium bromide (TBPB) as catalyst in NMP at 160 °C for 15 h. Under this curing condition, the cured materials of jER 828 or ESCN using various CA derivatives as curing agents were prepared. Except for BCA4 derivatives, the yields of thermal curing reaction were higher than 90%. T_gs and Ts of the resultant cured materials were in the range of 113–248 °C and 363–404 °C, respectively. These results mean that the cured epoxy resins with excellent T_gs were successfully formed by using CA derivatives as curing agents. It was also found that the T_gs of cured epoxy resins were strongly affected by the degree of esterification of CA derivatives. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 1931–1942, 2010     

Analysis of microcystins by capillary zone electrophoresis coupling with electrospray ionization mass spectrometry

In this paper, a rapid and effective method based on capillary zone electrophoresis (CZE) coupled with electrospray ionization mass spectrometry (ESI-MS) was established for the trace analysis of microcystin (MC) isomers in crude algae sample. The experimental conditions including the composition, acidity and concentration of buffer, separation voltage, injection time, and MS detection parameters were investigated in detail. A capillary separation system was as follows: a uncoated fused-silica capillary tube (50 μm i.d. × 90 cm), 40 mmol L⁻¹ ammonium acetate solution (pH 9.86) as running buffer, 25 kV as separation voltage, 20 kV × 3 s water first and 20 kV × 20 s for sample injection. Mass analysis was performed in ESI source, with sheath gas temperature 150 °C, sheath gas pressure 10 psi, and sheath gas flow 6 L min⁻¹. And sheath liquid was 7.5 mmol L⁻¹ acetic acid in 50% isopropanol-water (3 μL min⁻¹). Protonation and ammonium adduct molecular ions m/z 506.9 (MC-LR) and 532.0 (MC-YR) were used for the quantification of MCs. Under these conditions, two MCs were baseline separated within 9 min, the calibration curves were obtained in the range of 0.11-10.0 μg mL⁻¹ and 0.16-10.5 μg mL⁻¹ for MC-LR and MC-YR, respectively. Meanwhile, limits of detection were 0.05 and 0.08 μg mL⁻¹ for MC-LR and MC-YR, respectively. The recoveries for the two MCs were in the range of 95.8-108%. The developed approach had been successfully applied to the analysis of MCs in crude algae samples.