On the mechanics of mother-of-pearl: A key feature in the material hierarchical structure

Mother-of-pearl, also known as nacre, is the iridescent material which forms the inner layer of seashells from gastropods and bivalves. It is mostly made of microscopic ceramic tablets densely packed and bonded together by a thin layer of biopolymer. The hierarchical microstructure of this biological material is the result of millions of years of evolution, and it is so well organized that its strength and toughness are far superior to the ceramic it is made of. In this work the structure of nacre is described over several length scales. The tablets were found to have wavy surfaces, which were observed and quantified using various experimental techniques. Tensile and shear tests performed on small samples revealed that nacre can withstand relatively large inelastic strains and exhibits strain hardening. In this article we argue that the inelastic mechanism responsible for this behavior is sliding of the tablets on one another accompanied by transverse expansion in the direction perpendicular to the tablet planes. Three dimensional representative volume elements, based on the identified nacre microstructure and incorporating cohesive elements with a constitutive response consistent with the interface material and nanoscale features were numerically analyzed. The simulations revealed that even in the absence of nanoscale hardening mechanism at the interfaces, the microscale waviness of the tablets could generate strain hardening, thereby spreading the inelastic deformation and suppressing damage localization leading to material instability. The formation of large regions of inelastic deformations around cracks and defects in nacre are believed to be an important contribution to its toughness. In addition, it was shown that the tablet junctions (vertical junctions between tablets) strengthen the microstructure but do not contribute to the overall material hardening. Statistical variations within the microstructure were found to be beneficial to hardening and to the overall mechanical stability of nacre. These results provide new insights into the microstructural features that make nacre tough and damage tolerant. Based on these findings, some design guidelines for composites mimicking nacre are proposed.     

A tube-by-tube reduction method for simultaneous heat and mass transfer characteristics for plain fin-and-tube heat exchangers in dehumidifying conditions

This study proposed a new method, namely a tube-by-tube reduction method to analyze the performance of fin-and-tube heat exchangers having plain fin configuration under dehumidifying conditions. The mass transfer coefficients which seldom reported in the open literature, are also presented. For fully wet conditions, it is found that the reduced results for both sensible heat transfer performance and the mass transfer performance by the present method are insensitive to change of inlet humidity. Unlike those tested in fully dry condition, the sensible heat transfer performance under dehumidification is comparatively independent of fin pitch. The ratio of the heat transfer characteristic to mass transfer characteristic (h_c,o/h_d,o C_p,a) is in the range of 0.6~1.0, and the ratio is insensitive to change of fin spacing at low Reynolds number. However, a slight drop of the ratio of (h_c,o/h_d,o C_p,a) is seen with the decrease of fin spacing when the Reynolds number is sufficient high. This is associated with the more pronounced influence due to condensate removal by the vapor shear. Correlations are proposed to describe the heat and mass performance for the present plate fin configurations. These correlations can describe 89% of the Chilton Colburn j-factor of the heat transfer (j_h) within 15% and can correlate 81% of the Chilton Colburn j-factor of the mass transfer (j_m) within 20%.     

山东龙口北皂煤矿软岩力学特性实验研究

根据室内实验结果, 本文讨论了北皂煤矿的岩石力学性质, 物化特性。泥质岩类的力学性质和水理性质、物化特性有关。泥质岩类具有显著的流动变形和各向异性。     

汽车碰撞砼护拦过程的数值模拟

将汽车与砼护拦简化为刚体，给出了描述碰撞过程中车辆三维空间运动的Ｅｕｌｅｒ－Ｌａｇｒａｎｇｅ方程－微分代数方程组，采用半显式外插方法求解上述方程组。数值计算得出的车辆各方向上的最大平均加速度、最大侧倾角、最大俯仰角、车轮沿护拦面的最大爬升值及车辆脱离护拦时的弹出角等结果是从乘员风险和车辆轨迹等多角全面评估砼护拦的安全性能的重要依据。针对美国ＮｅｗＪｅｒｃｙ型砼护拦的实际算例与文献结果吻合较好。     

PLA,PPC和PHBV共混物的热性能、力学性能和生物降解性能研究

将聚乳酸(PLA)、聚碳酸酯(PPC)及β-羟基丁酸酯与β-羟基戊酸酯共聚物(PHBV)以溶液浇注法制备了各种不同比例的共混膜(60/20/20,40/20/40,40/40/20,20/60/20,20/40/40,20/20/60)。采用示差扫描量热分析(DSC)和热重分析(TG)研究了共混物的热性能,采用万能材料试验机研究了共混物的力学性能,通过土壤悬浊拟环境降解实验和扫描电子显微镜(SEM)研究了共混材料的环境生物降解性能。结果显示,该三元共混体系是部分相容的体系,PLA增加了材料的强度,PPC增加了材料的断裂伸长,PHBV则提高了材料的环境生物降解速率,三者优势互补,是一种有应用前景的生物降解共混体系。     

Development of High Performance Liquid Chromatography Method for Costunolide and Dehydrocostuslactone in Mice Plasma and Tissues:Application to Pharmacokinetic Study

A simple and sensitive high performance liquid chromatographic (HPLC) method for simultaneous determination of costunolide and dehydrocostuslactone in mice plasma and tissues was developed and validated. Costunolide and dehydrocostuslactone were extracted into acetonitrile and separated using an isocratic mobile phase, on a Hypersil ODS C18 column. The effluent was monitored by UV detector at 210 nm and at a flow rate of 1.0 mL· min^?1 and 25°C. The linearity ranges of proposed method were 0.223–8.920 µg·mL^?1 for costunolide and 0.227–9.080 µg·mL^?1 for dehydrocostuslactone. The intra‐day and inter‐day RSD of the assay method for the two components were less than 5%, and mean recovery was within the 86.5% to 101.8% range. The method was found to be precise, accurate, and specific during the study. The method was successfully applied for pharmacokinetic study of costunolide and dehydrocostuslactone after application of ethanol extraction of Muxiang (EEM) in mice.     

高效液相色谱法测定全血中直链烷基苯磺酸钠

提出了高效液相色谱法测定全血中直链烷基苯磺酸钠同系物的含量。全血样品用酸性提取溶液稀释,过Bakerbond SPE C18固相萃取小柱,经甲醇-乙酸-水(49+2+49)混合溶液淋洗后用甲醇-氨水(98+2)混合溶液洗脱。经纯化后的洗脱液在Wakopak WS AS-Aqua(250 mm×4.6 mm,5μm)柱上进行分离,流动相为乙腈与水(60+40)混合溶液,检测波长为228 nm。5种n-ABS同系物的C10~C14的质量分数在10.0~100.0 ng.g-1范围内与其峰面积呈线性关系,全血中各同系物回收率为78%~107%;日内相对标准偏差(n=5)≤10%,日间相对标准偏差(n=5)≤13%。     

Application of in-plasma catalysis and post-plasma catalysis for methane partial oxidation to methanol over a Fe2O3-CuO/γ-Al2O3 catalyst

Methane partial oxidation to methanol (MPOM) using dielectric barrier discharge over a Fe2O3-CuO/γ-Al2O3 catalyst was performed. The multicomponent catalyst was combined with plasma in two different configurations, i.e., in-plasma catalysis (IPC) and post-plasma catalysis (PPC). It was found that the catalytic performance of the catalysts for MPOM was strongly dependent on the hybrid configuration. A better synergistic performance of plasma and catalysis was achieved in the IPC configuration, but the catalysts packed in the discharge zone showed lower stability than those connected to the discharge zone in sequence. Active species, such as ozone, atomic oxygen and methyl radicals, were produced from the plasma-catalysis process, and made a major contribution to methanol synthesis. These active species were identified by the means of in situ optical emission spectra, ozone measurement and FT-IR spectra. It was confirmed that the amount of active species in the IPC system was greater than that in the PPC system. The results of TG, XRD, and N2 adsorption-desorption revealed that carbon deposition on the spent catalyst surface was responsible for the catalyst deactivation in the IPC configuration.     

橡胶及橡胶制品中4种酚类防霉剂的高效液相色谱法测定

建立了橡胶及其制品中硝基苯酚(PNP)、2,3,5,6-四氯苯酚(TeCP)、五氯苯酚(PCP)、邻苯基苯酚(OPP)4种酚类防腐剂的高效液相色谱测定方法。样品冷冻粉碎后,经甲醇超声提取,在Venusil-XBP C18色谱柱(250 mm×4.6 mm,5μm)上以10 mmol/L醋酸铵和甲醇为流动相梯度洗脱,采用二极管阵列检测器,PCP、TeCP、OPP的检测波长为220 nm,PNP的检测波长为320 nm。4种酚类防霉剂的质量浓度在0.5~250mg/L范围内与峰面积呈良好的线性关系,相关系数大于0.999 4。丁苯橡胶、硅橡胶基体的加标回收实验结果表明:TeCP、PCP、OPP、PNP在不同基质中的平均加标回收率分别为82%~95%、68%~90%、85%~98%、87%~98%,相对标准偏差小于5%。     

饮料中红花黄色素的固相萃取/超高效液相色谱-质谱测定

利用超高效液相色谱-电喷雾串联四极杆质谱法对从红花中提取纯化的红花黄色素进行结构分析,其包含对羟基红花黄A(34.0%)、红花黄A(27.4%)、脱水红花黄B(23.2%)和红花黄C(8.3%)4种主要成分。建立了测定碳酸类、果汁类饮料中4种色素成分的SPE/UPLC检测方法。利用大孔吸附树脂作为填料,自制SPE固相萃取柱,对饮料中的红花黄色素进行吸附解吸,通过优化固相萃取条件,使得各组分的回收率为84%~116%,相对标准偏差为0.78%~6.6%。各组分在0.40~17 mg/L范围内具有良好的线性关系,线性系数均不小于0.998 8。