PYX基高聚物粘结炸药界面相互作用及力学性能的分子动力学模拟

本文采用分子动力学(MD)方法,模拟计算了聚氨酯(Estane 5703),三元乙丙橡胶(EPDM),氟聚物(F2311)三种高聚物分子分别与2,6-双(苦氨基)-3,5-二硝基吡啶(PYX)(011)晶面构建的高聚物粘结炸药(PBXs)体系的结合能,内聚能密度,径向分布函数以及力学性能.结果表明,Estane 5703与PYX(011)晶面之间相互作用最强;不同粘结剂与晶体之间的内聚能密度大小顺序为PYX/F2311> PYX/Estane 5703> PYX/EPDM;径向分布函数分析可知PYX(011)晶面与高聚物分子间的相互作用主要为静电相互作用;添加3种粘结剂后PBX体系的拉伸强度和断裂强度都得到了改善,而除了F2311外,加入另外两种粘结剂后,提高了PBX体系的抗剪切应变能力.     

物理实验管理系统的构建与实现

介绍了通过运用网络平台构建物理实验中心的管理系统,以实现学生选课、成绩管理、教学信息管理和发布、教学资料的上网及仪器管理等一系列的功能,使物理实验中心的各项工作有序而高效.     

Computational design and screening of promising energetic materials: Novel azobis(tetrazoles) with ten catenated nitrogen atoms chain

Density functional theory methods were used to study on 2 N10 compounds, 1,1′‐azobis(tetrazole) and 1,1′‐azobis(5‐methyltetrazole). We systematically investigated 10 novel substituted azobis(tetrazoles) with 10 catenated nitrogen atoms and various energetic groups (–CF₃ 1 , –C(NO₂)₃ 3 , –N₃ 5 , –NH₂ 6 , –NHNH₂ 7 , –NHNO₂ 8 , –NO₂ 9 , –OCH₃ 10 , –OH 11 , –ONO₂ 12 ). The optimized geometry, frontier molecular orbitals, electrostatic potential, Infrared and nuclear magnetic resonance spectrum were calculated for inspecting the molecular structure and stability as well as chemical reactivity. The effects of different substituents on the density, enthalpy of formation, heat of explosion, detonation velocity and pressure, and sensitivity of the azobis(tetrazole) derivatives have been investigated. Compound 9 with nitro was found to have remarkable detonation performances (D = 9.61 km/s, P = 42.14 GPa), which are close to the excellent explosive CL‐20. Results show that compounds 1 , 3 , 4 , 7 , 9 , 11, and 12 have high potential to replace RDX. It is surprising that compounds 1 , 3 , 9, and 12 possess better energetic properties than HMX. These novel substituted azobis(tetrazoles) with unique N10 structure may be promising candidates of HEDMs with outstanding performance and acceptable sensitivities.     

Enhanced thermoelectric performance of PEDOT: PSS films via ionic liquid post-treatment

Thermoelectric(TE)energy harvesting can effectively convert waste heat into electricity,which is a crucial technology to solve energy concerns.As a promising candidate for energy conversion,poly(3,4-ethylenedioxythiophene):poly(styrene sulfonate)(PEDOT:PSS)has gained significant attention owing to its easy doping,high transparency,and solution processability.However,the TE performance of PEDOT:PSS still needs to be further enhanced.Herein,different approaches have been applied for tuning the TE properties:(i)direct dipping PEDOT:PSS thin films in ionic liquid;(ii)post-treatment of the films with concentrated sulfuric acid(H₂SO₄),and then dipping in ionic liquid.Besides,the same bis(trifluoromethanesulfonyl)amide(TFSI)anion and different cation salts,including 1-ethyl-3-methylimidazolium(EMIM+)and lithium(Li+),are selected to study the influence of varying cation types on the TE properties of PEDOT:PSS.The Seebeck coefficient and electrical conductivity of the PEDOT:PSS film treated with H2SO4EMIM:TFSI increase simultaneously,and the resulting maximum power factor is 46.7μW·m^-1·K^-2,which may be attributed to the ionic liquid facilitating the rearrangement of the molecular chain of PEDOT.The work provides a reference for the development of organic films with high TE properties.     

卟啉钯敏化剂构效性质与三线态-三线态湮灭上转换性能研究

上转换发光是一种将长波长的激发光转化为短波长发射的反斯托克斯发光现象,三线态-三线态湮灭上转换（TTA-UC）能够在较低密度能量下被激发,且上转换量子产率高,因此获得研究者们广泛关注。关于敏化剂分子结构与上转换发光性能相关性的研究一直是TTA-UC研究领域的重要热点,选择两种代表性的卟啉钯光敏剂[PdOEP-八乙基卟啉钯(Ⅱ)和PdBrTPP-四溴苯基卟啉钯(Ⅱ)]与蒽衍生物9,10-(4-羟甲基)苯基蒽p-DHMPA发光剂组合上转换体系作为研究模型,通过一系列合成工作获得材料分子后,进一步比较两种敏化剂的光谱性质与体系最终上转换性能之间关系。通过细致研究敏化剂和发光剂的荧光发射和寿命等光谱性质对敏化剂系间窜越,三线态-三线态能量转移及三线态-三线态湮灭等能量传递过程的影响后,发现在532 nm处的摩尔吸光系数PdBrTPP (10.8 cm-1·mmol-1)大于PdOEP (3.0 cm-1·mmol-1);三线态寿命PdBrTPP (173.13 μs)大于PdOEP (109.21 μs)。但与p-DHMPA配对时光敏剂与发光剂的三线态能级差ΔE_TT,PdOEP (0.140 eV)却高于PdBrTPP (0.062 eV),通过Stern-Volmer方程得到Stern-Volmer猝灭常数K_SV和双分子猝灭常数k_q值也是PdOEP略高,最终表现出上转换阈值PdOEP/p-DHMPA (22.40 mW·cm-2)小于PdBrTPP/p-DHMPA (29.78 mW·cm-2),上转换发光效率Φ_UC,PdOEP/p-DHMPA (28.3％)大于PdBrTPP/p-DHMPA (26.8％)。因此,卟啉钯敏化剂的构效对三重态湮灭上转换发光效率影响最为重要的决定因素是敏化剂三线态高低。对于不同的敏化剂,在分子主体结构、摩尔吸光系数与三线态寿命等光谱参数差别不大的情况下,敏化剂的三线态能级越高,就将会具有更大的上转换发光效率。然而如果以总上转换能力指标来评价,PdBrTPP的共轭结构能够提升其在激发波长处吸收更多光子的能力,具有比PdOEP更高的摩尔吸光系数,造成其总上转换能力η比PdOEP高3.4倍。因此从上转换总效能指标来评价,通过敏化剂分子设计调控其在激发光波长处的摩尔吸光系数也不失为一种简单易行的方法。     

Effect of melt viscosity and surface tension of polymers on the percolation threshold of conductive-particle-filled polymeric composites

The electrical conductivities of carbon-black-filled low-density polyethylene (LDPE), poly(methyl methacrylate) (PMMA), and poly(vinyl chloride)-vinyl acetate (PVC/ VAc) copolymer were measured as functions of carbon content and melt viscosity of the matrix at the temperatures at which the composites were prepared. Sharp breaks in the relationship between the carbon filler content and the conductivity of composites were observed in all specimens at some content of the carbon filler. The conductivity jumps as much as 10 orders of magnitude at the break point. This phenomenon has been known as the “percolation threshold”. The critical carbon content corresponding to the break point     

A new sample preparation and separation combination for the precise,accurate, and simultaneous determination of uracil and dihydrouracil in human plasma by reversed‐phase HPLC

We have developed an efficient procedure and detection method using reversed‐phase high‐performance liquid chromatography for the simultaneous measurement of uracil and dihydrouracil in human plasma. The procedure, including chromatographic conditions and sample preparation, was optimized and validated. Optimization of the sample preparation included deproteinization, extraction, and cleanup. A new sample preparation method which resulted in an improved extraction yield of analytes and significantly reduced interference at low‐wavelength UV detection was developed. The developed method was validated for specificity, linearity, limits of detection and quantitation, precision, and accuracy. All calibration curves showed excellent linear regression (R ² > 0.9990) within the testing range. The limit of detection for uracil and dihydrouracil was 2.5 and 5.0 ng/mL, respectively. The extraction yields were >94% for uracil and 91% for dihydrouracil. Intra‐ and interassay precision and accuracy for uracil and dihydrouracil were lower than 8% at all tested concentrations. The proposed method was successfully applied to measure plasma concentrations of uracil and dihydrouracil in colorectal cancer patients scheduled to receive fluoropyrimidine‐based chemotherapy.     

Simultaneous densitometric determination of anthelmintic drug albendazole and its metabolite albendazole sulfoxide by HPTLC in human plasma and pharmaceutical formulations

A new, simple, accurate and precise high‐performance thin‐layer chromatographic method has been developed and validated for simultaneous determination of an anthelmintic drug, albendazole, and its active metabolite albendazole, sulfoxide. Planar chromatographic separation was performed on aluminum‐backed layer of silica gel 60G F₂₅₄ using a mixture of toluene–acetonitrile–glacial acetic acid (7.0:2.9:0.1, v /v/v) as the mobile phase. For quantitation, the separated spots were scanned densitometrically at 225 nm. The retention factors (R _f) obtained under the established conditions were 0.76 ± 0.01 and 0.50 ± 0.01 and the regression plots were linear (r ² ≥ 0.9997) in the concentration ranges 50–350 and 100–700 ng/band for albendazole and albendazole sulfoxide, respectively. The method was validated for linearity, specificity, accuracy (recovery) and precision, repeatability, stability and robustness. The limit of detection and limit of quantitation found were 9.84 and 29.81 ng/band for albendazole and 21.60 and 65.45 ng/band for albendazole sulfoxide, respectively. For plasma samples, solid‐phase extraction of analytes yielded mean extraction recoveries of 87.59 and 87.13% for albendazole and albendazole sulfoxide, respectively. The method was successfully applied for the analysis of albendazole in pharmaceutical formulations with accuracy ≥99.32%.     

Quantification of midazolam,morphine and metabolites in plasma using 96‐well solid‐phase extraction and ultra‐performance liquid chromatography–tandem mass spectrometry

Currently, pharmacokinetic–pharmacodynamic studies of sedatives and analgesics are performed in neonates and children to find suitable dose regimens. As a result, sensitive assays using only small volumes of blood are necessary to determine drug and metabolite concentrations. We developed an ultra‐performance liquid chromatographic method with tandem mass spectrometry detection for quantification of midazolam, 1‐hydroxymidazolam, hydroxymidazolamglucuronide, morphine, morphine‐3‐glucuronide and morphine‐6‐glucuronide in 100 μL of plasma. Cleanup consisted of 96 wells micro‐solid phase extraction, before reversed‐phase chromatographic separation (ultra‐performance liquid chromatography) and selective detection using electrospray ionization tandem mass spectrometry. Separate solid‐phase extraction methods were necessary to quantify morphine, midazolam and their metabolites because of each group's physicochemical properties. Standard curves were linear over a large dynamic range with adequate limits of quantitation. Intra‐ and interrun accuracy and precision were within 85–115% (of nominal concentration using a fresh calibration curve) and 15% (coefficient of variation, CV) respectively. Recoveries were >80% for all analytes, with interbatch CVs (as a measure of matrix effects) of less than 15% over six batches of plasma. Stability in plasma and extracts was sufficient, allowing large autosampler loads. Runtime was 3.00 min per sample for each method. The combination of 96‐well micro‐SPE and UPLC‐MS/MS allows reliable quantification of morphine, midazolam and their major metabolites in 100 μL of plasma. Copyright © 2010 John Wiley & Sons, Ltd.     

Cooperation within the Small Cell: The indoor,correlated shadowing case

The deployment of Small Cells in fourth generation (4G) communication systems is aimed at providing significant capacity improvements and higher availabilities. However, the design of Small Cell systems in indoor environments is especially challenging due to high shadowing attenuation induced by clutter and human blockage. This paper studies node cooperation and multiple relaying and proposes novel analytical formulas for the outage probability of cooperative Small Cells suffering from shadowing. The channel fading gains are modeled as correlated lognormal random variables, in order to reflect the properties of indoor propagation environments. Various cooperative strategies are considered, taking into account the use of one or two relays and different receiver combining techniques. In addition, the relative performance of each cooperative configuration and the benefit of cooperation over non-cooperation are investigated. Finally, interesting and useful insights are produced regarding the impact of the correlated lognormal environment parameters on the configuration of cooperative Small Cells.