The combined effect of photodegradation and stress cracking in polystyrene

This work aims to analyze the effects of photodegradation on the stress cracking resistance of polystyrene. Injection moulded samples were exposed to the ultraviolet light for various times in the laboratory prior to solvent contact. The bars were then stressed in a tensile testing machine under the presence of butanol. During this period the stress relaxation was monitored and the ultimate properties were evaluated after selected periods of stress cracking. Complementary tests were done by size exclusion chromatography and by scanning electron microscopy. The results indicated that butanol causes significant modification in polystyrene, with extensive surface crazing as well as reduction in mechanical properties. This is intensified under higher mechanical stress. The previous degraded samples showed a higher level of stress relaxation and a greater loss in tensile strength in comparison to the undegraded ones. The synergist action of photodegradation and stress cracking in polystyrene may be a consequence of the chemical changes caused by oxidation like the formation of polar chemical groups and the reduction in molecular weight.     

反相高效液相色谱法测定全血中马钱子碱和士的宁的含量

 建立了反相高效液相色谱法定量分析全血中马钱子碱和士的宁含量的方法。该方法应用Oasis  R ○ MCX固相萃取小柱进行提取、采用XTerra TM RP 18 色谱柱进行分离。在该条件下马钱子碱和士的宁的线性范围为0.05～10 mg/L ,最小检出限为0.15 ng。该方法测得马钱子碱和士的宁在低、中、高浓度下的回收率均在90%以上,日内、日间精密度均符合方法学要求。该方法灵敏、快速、准确,适用于临床血药浓度监测和法医毒化检验。     

Effects of coupling agents on mechanical and morphological behavior of the PP/HDPE blend with two different CaCO3

The main purpose of incorporating fillers, such as calcium carbonate, into blends of polyolefins is to decrease costs and change tensile and impact properties. Structural differences between both components give rise to the formation of large filler agglomerates in the polymer matrix, which influence the mechanical response of the material. Therefore, the coupling agents of the Lica 12 type at various concentrations was used to facilitate the link between filler and matrix (the latter consisting of PP/HDPE 80/20 wt). Filler was added to the PP/HDPE blend at a 30 wt.% concentration. Two types of calcium carbonate (CaCO₃) were used. These have different average sizes (3.0 and 1.8 μm) which were determined by means of laser diffraction techniques. In addition other coupling agents of the titanate type, such as Lica 09, Lica 01, zirconates ZN 12, and a 1:1 mixture of Lica 12 and Lica 01, were used. This study clearly demonstrated that the addition of the coupling agent to CaCO₃ modifies the mechanical properties of the PP/HDPE/CaCO₃ composites. Values of the mechanical properties indicate that due to its characteristics, each coupling agent gives rise to increases in a particular mechanical property. In the case of Lica 01 an increase was verified in Young’s modulus at 0.7 wt.% and in elongation at break at both concentrations (0.3 and 0.7 wt.%), whereas ZN 12 brought about an increase in elongation at break. The 1:1 mixture of Lica 12 and Lica 01 caused impact resistance of the blend of PP/HDPE with CaCO₃ to increase considerably.     

高效液相色谱法分析蜂蜜中的糖

本文研究了用四乙撑五胺（简称ＴＥＰＡ）作为胺基改善剂，在硅胶柱上定量分析蜂蜜含糖量的方法，并成功地分离了木糖、果糖、葡萄糖、蔗糖、麦芽糖和乳糖。对操作条件进行了探讨。采用示差折光检测器检测，含０．０１％ＴＥＰＡ的乙腈－水（７７＋２３）作流动相。六种糖的相对标准偏差均小于３．５％。     

L-卡尼丁分子压印聚合物作为手性分离色谱固定相的研究

以L－卡尼丁为模板分子，分别以α－甲基丙烯酸和丙烯酰胺为功能单体，乙二醇二甲基丙烯酸酯为 剂，采用分子压印技术合成了对L－卡尼丁具有高选择性的分子压印聚合物。将所得聚合物用作高效液相色谱固定相，研究了它们对外消旋卡尼丁盐酸盐的拆分能力，分析结果表明，α－甲基丙烯酸作为功能单体所得聚合物对外消旋卡尼丁盐酸盐具有良好的拆分作用，其分离因子α为1．89。     

Preparation and mechanical properties of thermal energy storage microcapsules

A series of heat energy storage microcapsules was prepared using melamine-formaldehyde resin as the shell material and the mechanical properties of the shell were investigated. A phase change material whose melting point was 24 °C was used as core and the quantity of heat involved in phase transition was 225.5 J/g. Average diameter of the microcapsules varied from 5 to 10 μm, and the globular surface was smooth and compact. The mechanical properties of the shell were evaluated by observing the surface morphological structure change after application of pressure by means of scanning electron microscopy. When the mass ratio of the core and shell material is 3:1, a yield point of about 1.1×10⁵ Pa was found and when the compression was increased beyond this point the microcapsules showed plastic behavior. This has been attributed to the cross-link density and to the high degree of reaction of the shell material. Different yield points subsequently reflected differences in the mechanical behavior. It was also found that the mechanical intensity of double-shell microcapsules was better than that of single shelled ones.     

Studies on the Electrochemical Characteristics of K2FeO4 Electrode

Discharge performance of K2FeO4 electrode under different conditions was studied by the constant electric current discharge method. The electrochemical characteristics of K2FeO4 electrode were investigated for the first time by means of cyclic voltammetry. The results show that the K2FeO4 electrode made at moderate pressure (20MPa) and discharged at lower current has better discharge performance. It is also found that K2FeO4 electrode is significantly rechargeable.     

高效液相色谱法测定橡胶促进剂TBBS

采用反相高效液相色谱法（HPLC）测定了橡胶促进剂N－叔丁基－2－苯并噻唑次磺酰胺（TBBS）的纯度，标准偏差小于0．3。     

HPLC of synthetic polymers characterization of polystyrenes by high performance precipitation liquid chromatography (HPPLC)

Summary The advantages and disadvantages of high performance precipitation liquid chromatography have been demonstrated for polystyrene homopolymers. Depending on the mobile phase composition at the dissolution point of the polymeric sample and surface properties of the stationary phase, elution is governed either by a solution process or by adsorption. A contribution by adsorption was noticed on silica as well as on reversed phases based on silica with a normal phase gradient of increasing polarity (heptane to dichloromethane). Elution was solely governed by solubility of the polymers on both types of stationary phase for polystyrenes with a molecular weight above 35 000 and reversed phase gradient of decreasing polarity (methanol to dichloromethane). Under these conditions an identical dependence of elution solvent composition on sample size was found as for turbidity titrations. Due to differences in the velocity of the eluent front and the polymeric sample with porous stationary phases the polymers can be eluted as colloidal solutions Non-porous stationary phases are superior in this respect because the velocities of eluent and solutes are identical.     

QuEChERS/超高效液相色谱-串联质谱法同时测定水产品中四溴双酚A与六溴环十二烷

建立了同时测定水产品中四溴双酚A(TBBPA)和六溴环十二烷(HBCD)的超高效液相色谱-串联质谱方法。样品前处理采用QuEChERS方法,均质生物样品用水分散后加乙腈提取,经C_(18)分散固相萃取净化。采用CORTECS~?C_(18)色谱柱(4.6 mm×100 mm×2.7μm)分离,以甲醇-水为流动相进行梯度洗脱,流速为0.7 mL/min。采用电喷雾离子源,在负离子模式下以多反应监测(MRM)方式检测。结果表明,TBBPA和3种HBCD单体在0.5～500μg/L范围内线性良好,相关系数(r)大于0.998,检出限(LOD,S/N=3)和定量下限(LOQ,S/N=10)分别为0.04～0.16μg/kg和0.12～0.55μg/kg。在5、20、50μg/kg加标水平下的平均回收率为74.0%～121%,相对标准偏差(RSD)为0.20%～23%。该方法操作简单、快速、重现性好,适用于水产品中TBBPA和HBCD的快速检测。