影响西安市燃气出租车发展变量的统计分析

燃气汽车规模化发展是解决城市环境污染的一个主要途径.以西安市燃气出租车发展问卷调查结果为依据,利用因子分析法对影响燃气出租车发展的变量进行分类.总结出影响燃气出租车发展的八个重要指标,覆涵了政府、加气站、司机个人等方面.     

Structure and mechanical properties of Al/AlN multilayer with different AlN layer thickness

Nanometer scale Al/AlN multilayers have been prepared by dc magnetron sputtering technique with a columnar target. A set of Al/AlN multilayers with the Al layer thickness of 2.9 nm and the AlN layer thickness variation from 1.13 to 6.81 nm were determined. Low angle X-ray diffraction (LAXRD) was used to analyze the layered structure of multilayers. The phase structure of the coatings was investigated with grazing angle XRD (GAXRD). Mechanical properties of these multilayers were thoroughly studied using a nanoindentation and ball-on-disk micro-tribometer. It was found that the multilayer hardness and reduced modulus showed no strong dependence on the AlN layer thickness. Al2.9 nm/AlN1.13 nm multilayer had more excellent tribological properties than single layers and other proportion multilayers with a lowest friction coefficient of 0.15. And the tribological properties of all the multilayers are superior to the AlN single layer.     

On the Erlang Loss Model with Time Dependent Input

We consider the M(t)/M(t)/m/m queue, where the arrival rate λ(t) and service rate μ(t) are arbitrary (smooth) functions of time. Letting p_n(t) be the probability that n servers are occupied at time t (0≤ n≤ m, t > 0), we study this distribution asymptotically, for m→∞ with a comparably large arrival rate λ(t) = O(m) (with μ(t) = O(1)). We use singular perturbation techniques to solve the forward equation for p_n(t) asymptotically. Particular attention is paid to computing the mean number of occupied servers and the blocking probability p_m(t). The analysis involves several different space-time ranges, as well as different initial conditions (we assume that at t = 0 exactly n₀ servers are occupied, 0≤ n₀≤ m). Numerical studies back up the asymptotic analysis. AMS subject classification: 60K25,34E10 Supported in part by NSF grants DMS-99-71656 and DMS-02-02815     

Automatic detection and identification of shocks in Gaussian state‐space models: a Bayesian approach

An automatic monitoring and intervention algorithm that permits the supervision of very general aspects in an univariate linear Gaussian state–space model is proposed. The algorithm makes use of a model comparison and selection approach within a Bayesian framework. In addition, this algorithm incorporates the possibility of eliminating earlier interventions when subsequent evidence against them comes to light. Finally, the procedure is illustrated with two empirical examples taken from the literature. Copyright © 2005 John Wiley & Sons, Ltd.     

具有高机械强度的掺Er~(3 )∶TeO_2-Nb_2O_5玻璃的光谱性质研究

熔制了掺铒碲铌玻璃样品(100-X)TeO2-XNb2O5(X=5,10,15,20mol%),测试了其密度、折射率、转变温度、析晶温度、维氏机械强度、吸收光谱、荧光光谱、荧光寿命等参量。利用Judd-Ofelt和McCumber理论分别计算了铒离子强度参量Ωt(t=2,4,6)和受激发射截面σemi的大小,研究了掺铒碲铌玻璃样品光谱参量对Nb2O5成分的依赖性,并与典型的碲锌钠玻璃(75TeO2-20ZnO-5Na2O)在热学、机械强度、光谱性质和放大品行四个方面进行了比较.     

A new microtensile tester for the study of MEMS materials with the aid of atomic force microscopy

An apparatus has been designed and implemented to measure the elastic tensile properties (Young's modulus and tensile strength) of surface micromachined polysilicon specimens. The tensile specimens are “dog-bone” shaped ending in a large “paddle” for convenient electrostatic or, in the improved apparatus, ultraviolet (UV) light curable adhesive gripping deposited with electrostatically controlled manipulation. The typical test section of the specimens is 400 μm long with 2 μm×50 μm cross section. The new device supports a nanomechanics method developed in our laboratory to acquire surface topologies of deforming specimens by means of Atomic Force Microscopy (AFM) to determine (fields of) strains via Digital Image Correlation (DIC). With this tool, high strength or non-linearly behaving materials can be tested under different environmental conditions by measuring the strains directly on the surface of the film with nanometer resolution.     

The structure of monolayer SiO2 on Mo(1 1 2): A 2-D [Si-O-Si] network or isolated [SiO4] units?

In this letter, atomically resolved scanning tunneling microscopic (STM) images obtained from monolayer SiO₂/Mo(1 1 2) are presented. The results are consistent with a previously proposed structural model of isolated [SiO₄] units based on vibrational features observed by high-resolution electron energy loss spectroscopy (HREELS) and infrared reflection-absorption spectroscopy (IRAS), and oxygen species identified by ultra-violet photoemission spectroscopy (UPS). These results are inconsistent with a structural model that assumes a two-dimensional (2-D) [Si-O-Si] network. These data illustrate that a metal substrate, although coated with an oxide thin layer, can be directly imaged at the atomic-scale with STM.     

上市公司兼并规律的实证分析

本应用因子分析方法和Logistic回归模型，对上市公司兼并规律作了实证分析，得出的结论对优化上市公司资产重组具有参考意义。     

A high-pressure Raman and X-ray diffraction study of the perovskite SrCeO3

A high-pressure structural study of SrCeO₃ has been performed at room temperature by Raman spectroscopy and X-ray diffraction up to 32 and 45 GPa, respectively. A first-order reversible phase transition is observed at about 12 GPa in both techniques. A second weak structural change, taking place between 18 and 25 GPa, can be suspected from Raman data. The increase in the number of Raman bands and diffraction lines is an indication that the symmetry is lowered and the compound does not evolve towards the ideal cubic perovskite structure. A Rietveld analysis of X-ray data was performed for the low-pressure phase and the atomic positions and the cell lattice parameters variations are reported in this paper. The volume compressibility derived from Raman modes (5.6×10⁻¹² Pa⁻¹), involving mainly bond-stretching for each type of polyhedron, is found to be close to the one obtained from volume cell variations measured by X-ray diffraction (7.9×10⁻¹² Pa⁻¹).     

Action Principle and Modification of the Faddeev–Popov Factor in Gauge Theories

The quantum action (dynamical) principle is exploited to investigate the nature and origin of the Faddeev–Popov (FP) factor in gauge theories without recourse to path integrals. Gauge invariant as well as gauge non-invariant interactions are considered to show that the FP factor needs to be modified in more general cases and expressions for these modifications are derived. In particular we show that a gauge invariant theory does not necessarily imply the familiar FP factor for proper quantization. PACS numbers: 11.15.-q; 12.10.-g; 12.15.-y; 12.38.-t