THE NECESSARY AND SUFFICIENT CONDITIONS FOR THE SOLVABILITY OF A CLASS OF THE MATRIX INVERSE PROBLEM

Censider the solutions of the matrix inverse problem, which are symmetric positive semide finite on a subspace. Necessary and sufficient conditions for the solvability, as well as the general solution are obtained. The best approximate solution by the above solution set is given. Thus the open problem in [1] is solved.     

Matrix assisted pulsed laser evaporation processing of triacetate-pullulan polysaccharide thin films for drug delivery systems

We report the first successful deposition of triacetate-pullulan polysaccharide thin films by matrix assisted pulsed laser evaporation. We used a KrF* excimer laser source (λ = 248 nm, τ ≈ 20 ns) operated at a repetition rate of 10 Hz. We demonstrated by FTIR that our thin films are composed of triacetate-pullulan maintaining its chemical structure and functionality. The dependence on incident laser fluence of the induced surface morphology is analysed.     

电感耦合等离子体原子发射光谱分析中不同电离电位元素基体效应的比较研究

选择不同电离电位的基体元素K、Na、La、Y和Mg,比较研究了它们对分析元素谱线强度的影响,其影响程度与谱线激发电位及基体元素电离电位有定量的相关关系。碱金属基体(K、Na)和非碱金属基体(La、Y和Mg)对分析元素检出限、背景强度及其相对标准偏差的影响显著不同,后者的记忆效应也大于前者。La的电离电位与Na相差不大。但其基体效应与Y相似,表明墓体效应与基体元素的化学性质有关。     

石墨炉原子吸收光谱法直接测定血样中硒

用石墨炉原子吸收光谱法，以硝酸铜和硝酸铵为基体改进剂，塞曼效应扣背景，采用标准加入法可直接测定血样中硒，回收率为95％～105％，相对标准偏差为5．8％，检出限为96pg，测定结果准确可靠。     

Trace anion determination in concentrated hydrofluoric acid solutions by two-dimensional ion chromatography I. Matrix elimination by ion-exclusion chromatography

Since years, ion exclusion chromatography (ICE) has been the standard method to separate strong acid analyte anions from concentrated weak acid matrices such as hydrofluoric acid (HF). In this work, the commercially available IonPac ICE-AS 1 column was used to separate trace levels of chloride, nitrate, sulfate and phosphate from HF solutions at 20% (w/w). The efficiency of the separation was studied in more detail using techniques such as ion chromatography (IC), inductively coupled plasma optical emission spectrometry (ICP-OES) and ICP-mass spectrometry (ICP-MS). For 20% (w/w) HF solutions and at a water carrier flow-rate of 0.50 ml/min, the cut window was set from 8.5 to 14.5 min. Under these conditions, analyte recoveries of better than 90% were obtained for chloride, nitrate and sulfate, but only about 75% for phosphate. The HF rejection efficiency was better than 99.9%. It was found that the ICP techniques, measuring total element levels and not species, yielded significantly higher recoveries for phosphorus and sulfur compared to IC. Evidence will be given that part of the added phosphorus (approximately 15% for an addition of 10 mg PO4/kg) is present as mono-fluorophosphoric acid (H2FPO3). In the case of sulfate, the difference between IC and ICP-MS could be attributed to an important matrix effect from the residual HF concentration.     

Elimination of matrix effects for headspace solid-phase microextraction of important volatile compounds in red wine using a novel coating

In this paper, hydroxy-terminated silicone oil-butyl methacrylate-divinylbenzene (OH-TSO-BMA-DVB) copolymer was first synthesized and used as stationary phase with the aid of γ-methacryloxypropyltrimethoxylsilane (KH-570) as bridge in solid-phase microextraction (SPME) using sol–gel method and cross-linking technique. It has high extraction efficiency for both polar alcohols and fatty acids and nonpolar esters in comparison with commercial PDMS, PDMS-DVB and PA fibers. A simple and sensitive headspace SPME-gas chromatography (HS-SPME-GC) method using the novel fiber was presented for the simultaneous analysis of both polar alcohols and fatty acids and nonpolar esters in wine. To check the matrix effects, various model wine matrices, including distilled water; 11.5% ethanol/water (v/v) solution; a concentrated synthetic wine; a ‘volatile-free’ wine and a real wine were investigated in detail. Matrix effects were compensated for by using internal standard method and selecting the ‘volatile-free’ wine as working standard. The method presented in this study showed satisfactory linearity, precision, detection limits and accuracy. The recoveries obtained ranged from 85.87 to 104.2%, and the relative standard deviation values were below 9%. The results obtained indicated that the present method is a validated and accurate procedure for the simultaneous determination of both polar and nonpolar aroma compounds in wine.     

衬钽管石墨炉原子吸收法测定痕量镓时基体改进剂的研究及应用

提出用钒和铜混合基体改进剂衬钽管石墨炉原子吸收测定镓的方法。衬钽管使镓的灵敏度提高6倍左右,钒和铜混合基体改进剂不仅能进一步提高灵敏度,而且能提高灰化温度,降低原子化温度,增强抗干扰能力。测定 GSD 标准样品中的镓时,不需对样品进行预分离即可直接进行测定,结果与参考值相符。     

沸石上萘的催化破环反应

沸石上萘的催化破环反应朱建华刘琳胡玉海曹洁明须沁华（南京大学化学化工学院化学系，南京２１００９３）关键词沸石催化剂，ＨＭＳ中孔分子筛，萘，多环芳烃，催化裂解，环境保护分类号Ｏ６４３／Ｘ５当前，治理大工业生产带来的环境污染已经成为全球关注的课题，也是...     

碳化钨负载S2O8^2-/ZrO2固体超强酸催化剂上的正戊烷反应研究

首次研究了碳化钨负载S2 O2 -8 ZrO2 (PSZ)固体超强酸催化剂 (WC PSZ)上正戊烷的反应情况及影响催化剂活性的各种因素 ,并用GC MS ,XRD ,BET等手段分析了正戊烷反应产物和催化剂的物理化学性质等 .结果表明 :WC PSZ对正戊烷具有异构化和裂解的双重催化作用 .PSZ在负载适量碳化钨后对正戊烷反应的活性和选择性显著提高 ,显示出优于Pt PSZ催化剂的效果 ,碳化钨的负载量为 2 0 %的效果最佳 .适当的焙烧、活化和反应温度等条件是取得良好反应效果的关键     

催化裂化USY／ZnO／Al2O3脱硫添加剂的高温水热失活

 对USY／ZnO／Al2O3汽油催化裂化脱硫添加剂经高温水热老化处理前后的脱硫性能进行了考察，发现老化后添加剂的脱硫性能大幅度下降．采用XRD和IR等技术对USY／ZnO／Al2O3添加剂在高温和高温水热条件下失活的原因进行了研究．结果表明，在高温下，ZnO可与USY沸石中的铝发生固相反应生成ZnAl2O4尖晶石，从而造成USY晶体结构崩塌，转变成无定形状态．在ZnO含量较高的条件下，ZnO可继续与USY晶体结构崩塌后生成的无定形的硅和铝的氧化物反应，生成Zn2SiO4硅锌矿和ZnAl2O4尖晶石结构．这一方面使添加剂失去了可形成硫化物吸附中心的ZnO，另一方面破坏了硫化物的裂化活性组分USY，从而造成添加剂脱硫性能下降甚至失去脱硫活性．ZnO对USY的破坏作用主要与温度有关．在USY／ZnO／Al2O3体系中，ZnO被ZnO与Al2O3之间形成的锌铝尖晶石膜固定并与USY隔离，单纯的高温条件对添加剂的破坏不显著，而水蒸气可以促进ZnO的移动，有利于ZnO与USY的接触，因此在高温和有水蒸气存 在的条件下添加剂的结构易遭到破坏．