端头带有质量块的悬臂梁在冲击载荷下的两种剪切失效模型

剪切失效是强动载荷作用下结构失效的重要模式。本文给出了计及梁的转动惯量时端头带有质量块的悬臂梁结构受到冲击载荷作用后发生剪切失效的无量纲判据。分析表明，在初始速度间断面上是否发生剪切失效取决于质量块初始动能和质量块尺寸与梁厚之比，而与梁的长度无关。梁的转动惯量对于剪切失效具有不可忽略的影响。     

A new decoupled finite element algorithm for viscoelastic flow. Part 2: Convergence properties of the algorithm

We present the results of some numerical experiments which were carried out in order to investigate the general characteristics of the algorithm described in Part I of this paper.     

Modeling of Wormhole Growth in Cold Production

Cold production is a non-thermal process in which sand is intentionally produced with the oil in order to enhance oil recovery. Two experiments were performed to investigate the effect of producing large quantities of sand on the overall permeability of a formation. A large high porosity channel (wormhole) was observed in both experiments. A model of wormhole growth was successfully tested in two sand production experiments simulating the growth of a wormhole from a perforation in a vertical well. The produced volumes of oil, sand and gas, the pressure distribution along the pack and the final length of the wormholes were well predicted. The two sand packs had significantly different cohesive strengths. The strength of the sand did not have a significant effect on the growth of the wormholes. The formation of tensile failure bands at the wormhole surface, as observed in the experiments, may weaken the sand and allow it to be fluidized more easily. This weakening effect would explain the lower pressure gradients calculated at the surface of the wormhole while it developed compared to the critical pressure gradient for sand production predicted by Bratli and Risnes (1981).     

修理设备可更换且有修理延迟的N部件串联系统分析

假定部件的寿命服从指数分布,修理延迟时间和修理时间均服从任意分布,并且修理设备的寿命服从指数分布,其更换时间服从任意分布的情况下,利用马尔可夫更新过程理论和拉普拉斯变换工具,研究了修理有延迟且修理设备可更换的n部件串联可修系统,求得了系统的可用度和(0,t]时间内的平均故障次数.进一步,在定义修理设备“广义忙期”下,利用全概率分解,提出了一种新的分析技术,讨论了修理设备的可靠性指标,得到修理设备的一些重要可靠性结果.     

带有反馈与起动故障的M/G/1重新访问排队系统的适定性分析

文章研究一个带有贝努利反馈且系统服务台经常遭受启动故障的重新访问排队系统模型,利用线性算子半群理论,通过对描述其系统行为的偏微分方程组的研究,证明了该模型所描述的系统所确定的算子是闭稠定耗散算子,生成C0压缩半群,从而得到系统的适定性.在证明1是算子的预解点时,采用了共轭方法.     

The first,the biggest,and other such considerations

We investigate the relation between the underlying dynamics of randomly evolv ing systems and the extrema statistics for such systems. Independent processes, Fokker-Planck processes and Lévy processes are considered.     

An experimental study of impact-induced failure events in homogeneous layered materials using dynamic photoelasticity and high-speed photography

The generation and the subsequent evolution of dynamic failure events in homogeneous layered materials that occur within microseconds after impact were investigated experimentally. Tested configurations include three-layer and two-layer, bonded Homalite specimens featuring different bonding strengths. High-speed photography and dynamic photoelasticity were utilized to study the nature, sequence and interaction of failure modes. A series of complex failure modes was observed. In most cases, and at the early stages of the impact event, intra-layer failure (or bulk matrix failure) appeared in the form of cracks radiating from the impact point. These cracks were opening-dominated and their speeds were less than the crack branching speed of the Homalite. Subsequent crack branching in several forms was also observed. Mixed-mode inter-layer cracking (or interfacial debonding) was initiated when the intra-layer cracks approached the interface with a large incident angle. The dynamic interaction between inter-layer crack formation and intra-layer crack growth (or the so-called “Cook–Gordon Mechanism”) was visualized for the first time. Interfacial bonding played a significant role in impact damage spreading. Cracks arrested at weak bonds and the stress wave intensity was reduced dramatically by the use of a thin but ductile adhesive layer.     

参数拟二次规划法及其在复合材料失效过程分析中的应用

本文介绍关于不连续线弹性静力学问题的多变量变分原理与相应的参数拟二次规划算法在复合材料层压板强度分析及纤维增强脆性基体材料单元细观失效过程分析中的应用。