ALICE实验中光子谱仪的触发选判机制的模拟研究

对ALICE实验光子谱仪的触发选判机制进行了模拟研究, 内容包括: 1) 对光子谱仪的能量重建性能进行了研究, 通过计算机模拟检验光子谱仪探测器对大横动量范围的入射粒子的能量重建性能; 2) 对光子谱仪探测器的事件触发效率进行了研究, 通过计算机模拟分析触发阈值的选取并计算触发效率; 3) 对光子谱仪探测器的事件触发频率进行了研究, 通过计算机模拟对p-p和Pb-Pb两种碰撞模式下的触发频率分别进行了估算和讨论.     

Lower bound for the convergence rate of nonstationary Jacobi-like iteration

Stationary and nonstationary Jacobi-like iterative processes for solving systems of linear algebraic equations are examined. For a system whose coefficient matrix A is an H-matrix, it is shown that the convergence rate of any Jacobi-like process is at least as high as that of the point Jacobi method as applied to a system with 〈A〉 as the coefficient matrix, where 〈A〉 is a comparison matrix of A.     

An improved algorithm for decomposing arc flows into multipath flows

We consider a multipath maximum flow problem introduced by Kishimoto (Networks 27(4)(1996)279-291). The focus is on efficient transformation from arc flows into multipath flows, where a multipath flow is a nonnegative combination of multipaths. A new algorithm that is more efficient than existing ones is proposed for the transformation.     

关于微分熵的一类强偏差定理

利用关于乘积分布密度的相对熵和相对熵率的概念,建立了相依连续型随机变量序列关于参考微分熵的一类强偏差定理,证明中给出了将Laplace变换应用于微分熵强偏差定理的研究的一种途径．     

BLOW-UP RESULTS AND ASYMPTOTIC BEHAVIOR OF THE EMDEN-FOWLER EQUATION u＂ = ｜u｜^p

In this article the author works with the ordinary differential equation u＂ = ｜u｜^p for some p 〉 0 and obtains some interesting phenomena concerning blow-up, blow-up rate, life-span, stability, instability, zeros and critical points of solutions to this equation.     

稀薄气体二维外部柱体绕流特性研究

本文采用直接模拟蒙特卡罗方法对稀薄气体二维外部柱体绕流问题进行了数值模拟。结果表明:外部绕流问题,在特定情况下会产生激波,激波的产生,不仅与气体的稀薄程度有关,还与来流马赫数有关。而气流与壁面之间的换热,随来流马赫数增加而增加,随气体稀薄程度增加而减小。     

环形燃烧室火焰简及旋流器流场计算

本文采用偏微分方程法生成贴体网格,在任意曲线坐标系下数值研究两种先进燃烧室火焰筒及其旋流器三维紊流流场。由于旋流器的形状复杂,本文采用型线定点法确定网格的边界。在非交错网格系下采用SIMPLE算法和混合差分格式对离散方程进行求解。计算结果表明计算方法合理,这计算程序进一步扩展,可用来预估环形燃烧室反应流流场。     

Interior point cutting plane method for optimal power flow

In this paper, an interior point cutting plane method (IPCPM)is applied to solve optimal power flow (OPF) problems. Comparedwith the simplex cutting plane method (SCPM), the IPCPM is simpler,and efficient because of its polynomial-time characteristic.Issues in implementing IPCPM for OPF problems are addressed,including (1) how to generate cutting planes without using thesimplex tableau, (2) how to identify the basis variables inIPCPM, and (3) how to generate mixed integer cutting planes.The calculation speed of the proposed algorithm is further enhancedby utilizing the sparsity features of the OPF formulation. Numericalsimulations on IEEE 14-300-bus test systems have shown thatthe proposed method is effective.     

低进汽压力下超音速两相流升压特性实验研究

本文采用实验方法研究了进汽压力为0.2 MPa以下时,由蒸汽喷嘴、混合腔及相应的阀门和管道组成超音速汽液两相流升压加热装置的运行特性。实验表明在进汽压力为0.1 MPa-0.2 MPa时,超音速汽液两相流升压加热装置都可稳定可靠地运行,且升压效果明显,可满足电力、供暖、轻工等许多行业蒸汽加热的要求。     

某轴流压气机叶尖间隙效应实验研究

本文对某低速轴流压气机叶尖间隙尺度对性能的影响进行了实验研究,并通过不同的机匣结构情况研究一种叶尖漏流不敏感机匣。实验表明,不同的间隙尺度对叶轮机总体性能存在十分明显的影响。对绝大部分运行状态,小间隙下的压升和效率均明显高于大间隙的情况。另外,所采用的毛刷式和篦齿式的机匣实验结果表明,不论毛刷式还是篦齿式机匣,在大流量负攻角情况下对性能的影响不大,但毛刷式机匣并不能达到提高失速裕度的目的,而篦齿式机匣在小流量情况下对压升有所提高,但对效率影响不大。