Determination of Total Sennosides and Sennosides A,B, and A1 in Senna Leaflets,Pods, and Tablets by Two-Dimensional qNMR

In the present work, a two-dimensional qNMR method for the determination of sennosides was established. Using band-selective HSQC and the cross correlations of the characteristic 10–10’ bonds, we quantified the total amount of the value-determining dianthranoids in five minutes, thus, rendering the method not only fast, but also specific and stability indicating. The validation of the method revealed excellent accuracy (recovery rates of 98.5 to 103%), precision (RSD values of 3.1%), and repeatability (2.2%) and demonstrated the potential of 2D qNMR in the quality control of medicinal plants. In a second method, the use of 2D qNMR for the single analysis of sennosides A, B, and A₁ was evaluated with acceptable measurement times (31 min), accuracy (93.8%), and repeatability (5.4% and 5.6%) for the two major purgatives sennoside A and B. However, the precision for sennoside B and A₁ was not satisfactory, mainly due to the low resolution of the HSQC signals of the two compounds.     

Comparison of Volatile Profiles of Meads and Related Unifloral Honeys: Traceability Markers

Volatile profiles of unifloral honeys and meads prepared in different ways (boiled-saturated, not boiled-unsaturated) were investigated by headspace solid-phase micro extraction (HS-SPME) and dehydration homogeneous liquid–liquid extraction (DHLLE) followed by GC-FID/MS analyses. The obtained data were analyzed by principal component analysis (PCA) to evaluate the differences between the investigated products. The volatile profiles of honey as well as the boiled and the not boiled meads prepared from it showed significant discrepancies. The meads contained more aliphatic acids and esters but fewer monoterpenes and aliphatic hydrocarbons than the honey. Significant/substantial differences were found between the boiled (more aliphatic alcohols and acids) and the not boiled meads (more aliphatic hydrocarbons and esters). Some compounds related to yeast metabolism, such as tryptophol, may be considered markers of honey fermentation. This research allowed us to identify chemical markers of botanical origin, retained and detectable in the meads: 4-isopropenylcyclohexa-1,3-diene-1-carboxylic acid and 4-(1-hydroxy-2-propanyl)cyclohexa-1,3-diene-1-carboxylic acid for linden; valeric acid, γ-valerolactone, p-hydroxybenzoic acid for buckwheat; 4-hydroxybenzeneacetic acid, homovanillic acid and trans-coniferyl alcohol for honeydew; and methyl syringate for canola.     

高比探测率和高速石墨烯/n-GaAs复合结构的光电探测器

混合结构的石墨烯/半导体光电晶体管因其超高的响应度而备受关注.然而,该类光电晶体管通过源-漏电极测试得到的比探测率(D．)容易受到1/f噪声的限制.本文制备了混合结构的石墨烯/GaAs光电探测器,通过源-栅电极测得D*大约为1.82X1011 Jones,与通过源-漏电极测量相比,D'提高了约500倍.这可归因于界面上...     

Conserved Control Path in Multilayer Networks

The determination of directed control paths in complex networks is important because control paths indicate the structure of the propagation of control signals through edges. A challenging problem is to identify them in complex networked systems characterized by different types of interactions that form multilayer networks. In this study, we describe a graph pattern called the conserved control path, which allows us to model a common control structure among different types of relations. We present a practical conserved control path detection method (CoPath), which is based on a maximum-weighted matching, to determine the paths that play the most consistent roles in controlling signal transmission in multilayer networks. As a pragmatic application, we demonstrate that the control paths detected in a multilayered pan-cancer network are statistically more consistent. Additionally, they lead to the effective identification of drug targets, thereby demonstrating their power in predicting key pathways that influence multiple cancers.     

双旋转附属圆柱对主圆柱尾流控制的影响

基于Fluent软件平台,采用数值模拟方法对非稳态圆柱体结构尾流流动特性进行了研究。对在Re=50～200范围内,双旋转附属圆柱的转速对主圆柱体尾流流动特性的影响进行了分析。研究结果表明:随着附属圆柱旋转速率的增加,主圆柱体表面所受阻力系数平均值与均方根值、升力系数均方根值均会减小。同时,旋转速率的变化对柱体结构表面压力分布的影响显著,压力系数在附属圆柱的位置产生了跳跃性变化。另外,当附属圆柱转速达到临界值时,尾流涡街变窄,涡脱落现象消失,并且系统的能量效率到达最佳状态。     

Morphology Control of SrCO3 Crystals using Complexons as Modifiers in the Ethanol-water mixtures

Using SrC12-6H2O and Na2CO3 as the main raw materials and adding different complexons as modifiers with simple co-precipitation method, SrCO3 crystals with distinct morphologies like spherical, bundle-like, overlapping plate-like, hexagonal star-like, dumbbell-like, etc. can be synthesized in the ethanol-water mixtures. The samples were characterized by X-ray diffraction （XRD）, scanning electron microscopy （SEM） and Fourier transform infrared spectrograph （FT-IR）. The interrelated effect mechanism is presented in the end. Results show that the modifier carboxyl groups play a significant role in controlling the SrCO3 crystal morphologies, which can alter the crystal growth unit （Sr^2＋） supply mode and induce the crystal formation with the morphologies matching their spatial configurations.     

基于生存概率的保险基金最优投资策略研究

利用破产理论和随机控制理论研究保险基金最优投资策略,建立生存概率最大化的目标函数,得到最优投资策略满足的随机微分方程;在初始金逼近0时得到保险基金的最优投资策略的显示解;采用递推算法,得到初始准备金为任意值时的最优投资策略.     

中国聚变工程实验堆水冷包层钢构件流道成形控制研究

针对CFETR水冷包层流道钢构件热等静压制备时易变形压塌问题,利用单轴扩散焊设备开展了焊接工艺参数优化试验。在此基础上,重新设计了流道焊接界面位置和尺寸,用两步热等静压扩散焊法制备出了流道变形可控的平板型第一壁钢构件模块。优化试验表明,低活化钢试样的固相扩散焊温度需高于950℃,焊后经过760℃/60min回火热处理试样力学性能可以得到有效回复。     

基于虚拟中心电流法的HL-2M快控电源数学模型

针对中国环流器2号M(HL-2M)装置中用于核聚变物理实验等离子体的垂直不稳定性控制的快控电源拓扑结构,充分考虑线圈的自感与互感对输出的影响,构建出数学模型,首次提出并运用虚拟中心电流法,使得控制算法更加简单,采用多输入多输出的控制方法,利用2个参量控制3个变量。本文基于基本供电方案得到多线圈耦合电压,基于快控电源拓扑推导出快控电源电路方程,再将其合并得到最终的线圈电压数学模型,最后进行仿真验证。结果表明数学模型搭建正确,为今后进行进一步计算提供了坚实的基础。     

空间摄像机的热设计

根据空间摄像机的所处空间环境和结构特点,对其进行了热设计.采用被动热控措施进行热隔离和热疏导,充分利用了摄像机所搭载的卫星平台的热容;采用主动热控措施进行温差补偿,将温度拉平至热控指标范围之内.根据所采用的热控措施,针对空间摄像机进行了仿真分析,得到了满意的结果.