Acyclovir release from its composites with silica as a function of the silica matrix modification and the drug loading

Acyclovir release from its composites with unmodified silica at pH 1.6 and 7.4 follows zero order kinetics for two days. Modification of the silica matrix with phenyl groups leads to dramatic decrease in the drug release level at pH 7.4 compared with pH 1.6 as well as to heterogeneous phase state of acyclovir in the phenyl modified composite with high loading of the drug.     

Highly elastic cobweb-like SiO/CNF composites with reconstructed heterostructure for high-efficient lithium storage

The silicon-based materials are promising candidates for lithium-ion batteries owing to their high energy density. However, achieving long lifespan under realistic conditions remains a challenge because of the volume expansion and low conductivity. In this work, the highly elastic cobweb-like composite materials consisted by SiO and nanofibers are designed and fabricated for high-efficient lithium storage by ball-milling & electrostatic spinning method. The reconstructed heterostructure and highly elastic nanofibers can simultaneously increase the conductivity and inhibit the “expansion effect” of silicon-based materials. The constructed electrode of n-SiO/CNF delivers an initial capacity of 1700 mAh/g, and maintains the capacities over 1000 mAh/g after 100 cycles at the current density of 500 mA/g. Meanwhile, this electrode can give an initial coulombic efficiency over 85% and maintains at 98% in the following charge/discharge processes. Furthermore, it exhibits efficient long-term electrochemical performance, maintaining the capacity at about 1000 mAh/g at a high current density of 1000 mA/g after 1000 cycles. This work could provide a promising strategy for enhancing the performance of silicon-based composite materials for practical application in lithium-ion batteries.     

Low percolation conductive graphite flakes-filled poly(urethane-imide) composites with high thermal stability via imidization self-foaming structure

In the study, the conductive graphite flakes filled poly(urethane-imide) composites (PUI/GFs) with high performance were constructed by the thermal imidization self-foaming reaction. It was found that the foaming action could promote the redistribution of GFs during curing process and the formation of stable linear conductive pathways. The percolation threshold of PUI/GFs composites was lowered from 1.26 wt% (2000 mesh GFs) or 0.86 wt% (1000 mesh GFs) to 0.79 wt% (500 mesh GFs), which were relatively low percolation thresholds for polymer/GFs composites so far. When the content of 500 mesh GFs was 4.0 wt%, the electrical conductivity of the composite was as high as 3.96 × 10^?1 S/m. Also, a poly(urethane-imide) (PUI) matrix with excellent thermal stability (T_d10%: 334.97 °C) and mechanical properties (elongation at break: 324.52%, tensile strength: 15.88 MPa) was obtained by introducing the rigid aromatic heterocycle into the polyurethane (PU) hard segments. Moreover, the zero temperature coefficient of resistivity for the composites was observed at the temperature range from 30 °C to 200 °C. Consequently, PUI/GFs composites may provide the novel strategy for considerable conductive materials with high thermal stability in electrical conductivity.     

环己硅烷类液晶化合物的量子化学研究

运用AM1和PM3两种SCF-MO方法，通过能量梯度全优化计算，给出20种环己硅烷类（苯基乙烷系）液晶化合物的稳定几何构型、电子结构和基本性质．联系有机电子结构理论进行了细致的讨论．     

色谱灰色数模的建立及其应用研究(Ⅰ)──连续GM(1,N)模型的建立及色谱保留行为的预测

应用灰色系统理论和最小二乘原理，推导出连续GM（1，N）模型，并将该模型用于高效液相色谱中溶质保留行为的预测．研究了烷烃、烷基苯及对羟基苯甲酸酯等化合物的容量因子与流动相组成、容量因子与碳数、保留时间与温度、保留时间与碳数的关系，并建立了相应的数学模型，经验证，预测结果良好．     

液晶性芳香酰胺化合物的合成

合成了一系列炖粹以酰胺基为中心桥键的刚性芳香酰胺小分子化合物，并对其作了表征，发现其中有些化合物具有液晶性。酰胺键之间能形成很强的分子间氢键，使芳香酰胺小分子化合物的熔点很高，难于形成液成液晶态。研究发现，如果在这类化合物的中心苯环上引入合适的取代基以减弱分子间氢键，同时引入合适的末端基时，则可使芳香酰胺化合物生成液晶相的能力增强。     

热致液晶共聚酯酰胺／PET共混物的流变性能和原位增强特性

采用Ｉｎｓｔｒｏｎ３２１１型毛细管流变仪研究了ＰＥＡ／ＰＥＴ共混物的流变性能，据此探讨共混物熔体的可纺性，讨论了共混物配比与复合纤维力学性能的关系，并且偏光显微镜，扫描电镜研究纤维的结构。结果表明，共混物的表观粘度低于ＰＥＴ的粘度，当ＰＥＡ为１０％，共混物的表观粘度达到最小值；且ＰＥＡ含量低于１０％时，共混物的可纺性即，表现出良好的原位增强效果。     

一系列氢键诱导液晶复合物的合成及表征

以２－氰基－３－（４－（２－氯－３－甲基－１－丁酰氧基）－苯基丙烯酸（Ａ）为质子给体，Ｎ－（４－吡啶基亚甲基）－４－烷氧基苯胺（ｎＳＳＺ）为质子受体，合成了一系列新的氢键复和物，经红外光谱证实了分子间氢键的存在，通过ＤＳＣ，偏光方法及Ｘ射线衍射方法对其液晶行为进行研究，结果表明复合物呈现近晶相行为。     

在位分散聚合聚甲基丙烯酸甲酯/二氧化硅纳米复合材料研究

应用在位分散聚合方法制备了分散相粒径介于１３０ｎｍ左右的聚甲基丙烯酸甲酯／二氧化硅ＰＭＭＡ／ＳｉＯ２纳米复合材料，并利用ＳＥＭ，ＤＭＡ，ＴＧＡ等手段研究了该体系的性能．结果表明，经表面处理的ＳｉＯ２无机填料在复合材料基体中分散均匀，界面粘结好．ＳｉＯ２填充粒子的用量对基体的热稳定性，动态力学行为，光学行为以及拉伸强度，弹性模量，断裂伸长率等力学性能都有较大影响     

庚烯-1单体单元对胆甾型侧链液晶共聚砜热转变温度的调节

合成并用红外光谱法、核磁共振法和高效凝胶渗透色谱法表征了胆甾（烷）醇十一碳烯酸酯分别与庚烯 １、二氧化硫进行自由基共聚合得到的一系列不同组成的三元胆甾型侧链液晶共聚砜，用温控式偏振光显微镜观测了产物的液晶性能．结果表明：随庚烯 １单体单元组份含量的增加，该三元共聚砜的液晶相转变温度均降低，采用庚烯 １单体参与共聚的方法可以有效地调节胆甾型侧链液晶共聚砜的热转变温度．