有限CN-p-群

每个子群都C-正规的有限群称为CN-群.本文首先给出二元生成的CN-p-群的完全分类.在此基础上得到CN-p-群的结构:当p为奇素数时,有限群G为CNp-群当且仅当G的每个元都平凡地作用在Φ(G)上;有限群G为CN-2-群当且仅当对任意给定的a∈G,都有对任意g∈Φ(G),g~a=g或者对任意g∈Φ(G),g~a=g~(-1).最后给出两个CN-p-群的直积是CN-p-群的判定条件.     

Numerical analysis of nematic liquid crystal alignment on asymmetric surface grating structures

The influence of an asymmetric periodic grooved cell surface on the 2D static director configuration of a nematic liquid crystal has been investigated. The minimum in the Frank-Oseen free energy was solved numerically with the Rapini-Papoular form of the surface anchoring energy at the nematic-grating interface. Results are presented for the variation of pretilt angle in the tilted bulk director field as a function of the surface groove depth, pitch and asymmetry and the bulk parameters. The simulations demonstrate the existence of two energetically degenerate high and low pretilted bulk alignment configurations. The pretilt values in these two regimes and also for the low tilt regime with finite surface anchoring are consistent with experimental results. An effective increase in the resolution of the model is obtained by using an irregular grid to describe the surface profile.     

基于无线传感器网络的飞行器测控通信系统测量方案设计

随着航天技术的发展,飞行器测控通信系统需要测量的参数种类和数量不断增加,但同时要求系统在进行方案搭建时满足更高的可靠性、更小的体积和更小的设备质量。为解决这类问题,提出了基于无线传感器网络的飞行器测量方案,方案重点从节点配置、时间同步、网络拓扑、能源供应等方面对方案进行阐述,最后给出了应解决的关键技术攻关方向。     

基于非对称漂移双gamma跳-扩散过程的创新幂型期权定价模型

针对假设股价的对数收益率布朗运动在期权定价时产生的无法解释股价对数收益率的尖峰厚尾和序列相关性的缺陷,采用了Zhang提出的非对称漂移双gamma跳-扩散过程来描述资产(股价)的对数收益率运动形态(该过程是kou提出的双指数跳-扩散过程的推广),并利用Esscher风险中性变换,研究了幂型期权的定价公式.还设计了两种创新的幂型期权,在非对称漂移双gamma跳-扩散过程下给出了相应的定价公式.     

Parametric inference for multiple repairable systems under dependent competing risks

The focus of this article is on the analysis of repairable systems that are subject to multiple sources of recurrence. The event of interest at the system level is assumed to be caused by the earliest occurrence of a source, thereby conforming to a series system competing risks framework. Parametric inference is carried out under the power law process model that has found significant attention in industrial applications. Dependence among the cause‐specific recurrent processes is induced via a shared frailty structure. The theoretical inference results are implemented to a warranty database for a fleet of automobiles, for which the warranty repair is triggered by the failure of one of many components. Extensive finite‐sample simulation is carried out to supplement the asymptotic findings. Copyright © 2014 John Wiley & Sons, Ltd.     

Simple power supply for power load controlled isoelectric focusing

The power supply for IEF based on features of the Cockcroft‐Walton voltage multiplier (CW VM) is described in this work. The article describes a design of the IEF power supply, its electric characteristics, and testing by IEF analysis. A circuit diagram of the power supply included two opposite charged branches (each consisting of four voltage doublers). The designed CW VM was powered by 230 V/50 Hz alternate current and it generated up to 5 kV and 90 mW at the output. Voltage and current characteristics of the power supply were measured by known load resistances in the range from 10 kΩ to 1 GΩ, which is a common resistance range for IEF strip geometry. Further, the power supply was tested by a separation of a model mixture of colored pI markers using a 175 × 3 × 0.5 mm focusing bed. Automatically limited power load enabled analysis of samples without previous optimization of the focusing voltage or electric current time courses according to sample composition. Moreover, the developed power supply did not produce any intrinsic heat and was easy to set up with cheap and commonly available parts.     

一种车用单刀双掷开关的质检仪器研发

介绍了一种车用单刀双掷开关质量检测仪器的研发,包括检测系统的硬件设计、检测原理以及算法软件开发。首先,根据单刀双掷开关的工作原理及质量检测要求,开发了检测手指触觉压力的机械装置,以及控制开关通道切换的继电器控制电路;在此基础上,开发了相应的检测算法,可实现对开关切换状态、电压差以及手指触觉压力进行自动化的数据采集、分析、检测和判断,从而挑选出合格的开关;最后,设计了触屏人机交互界面,可实时显示产品检测的参数。该检测设备在某自动化生产线上经过近一年时间的检测验证,证明系统运行平稳,检测效果良好、误检率低,可以完全取代传统的人工检测方式,提高了开关的检测效率,降低了检测人员的工作量。     

面向数据挖掘的静态电源综合故障诊断研究

静态电源是机场桥载设备最重要的组成部件之一,应用非常广泛。然而,其产生的频发故障会造成设备利用率低、修复率时长和经济损失等问题,在基于桥载设备的安监系统上,提出了静态电源综合故障诊断方法,通过数据挖掘软件,建立了静态电源故障诊断预测模型。通过在线数据库测试结果表明得到了综合故障诊断方法在预测静态电源故障上显现的特点,得到了静态电源的未来状态,实现了对静态电源的实时故障进行预测,进而为解决故障提供方向和目标,最终达到降低经济损失最大化的目的。     

稀有气体卤化物准分子激光器工作气体实时补给技术

为延长稀有气体卤化物准分子激光器工作气体使用寿命,在原有供气设备基础上增加了工作气体实时补给技术.该技术采用FPGA控制系统将逐步提高放电电压、补充卤素气体和更换部分混合气体等操作有效组合起来.随着激光脉冲能量的下降,逐步提高放电电压;当放电电压达到最大值时,开始补充卤素气体,并恢复放电电压;当补充卤素气体效果不明显时,更换部分混合工作气体.将该技术应用于医用型ArF准分子激光器中进行实验研究,结果表明:在没有使用工作气体实时补给技术的情况下,激光器累计工作14.38 h后,输出单脉冲激光能量下降了17.2％;采用工作气体实时补给技术后,激光器输出能量下降速率明显降低,累计工作14.38 h,其单脉冲能量下降率能控制在3％范围内.因此,采用该技术可延长激光器工作气体的使用寿命、提高输出激光能量稳定性、减少停机次数并降低运行成本.