有机小分子染料和聚阳离子分子超薄膜的制备及其摩擦学性能研究

制备了以有机小分子染料酸性红 1 8为阴离子、以聚烯丙基氯化铵和聚乙烯亚胺为聚阳离子的分子沉积膜 ,用紫外可见分光光度计、接触角测定仪和椭圆偏振光测厚仪对所制备的超薄膜进行了表征 .用DF PM型动 静摩擦系数精密测定装置考察了超薄膜的摩擦学性能 ,采用扫描电子显微镜对薄膜的磨痕表面进行了观察 .结果表明 ,所制备的超薄复合沉积膜具有良好的减摩和耐磨性能     

Liquid-liquid Extraction System Based on Non-ionic Surfactant-salt-H_2O and Mechanism of Drug Extraction

The utilization of solid-liquid extraction system based on polymer-(NH4)2SO4 -H2O on separation of metal ions and bio-active substances has been summarized1. Cloud point extraction (CPE) benefits the environment and has been used in separation of metal chelates, biomacromolecules and in pretreatment of environmental samples2-4. In a 10 mL color comparison tube 20% PEG-1000 and 2.5 g (NH4)2SO4 were chosen as phase separation condition at pH 5.5. The average extraction efficiencies we…     

Transport properties and electroanalytical response characteristics of drotaverine ion-selective sensors

The construction and electroanalytical response characteristics of poly(vinyl chloride) matrix ion-selective sensors (ISSs) for drotaverine hydrochloride are described. The membranes incorporate ion-association complexes of drotaverine with tetraphenylborate, picrate, tetraiodomercurate, tetraiodobismuthate, Reinecke salt, and heteropolycompounds of Keggin structure—molybdophosphoric acid, tungstophosphoric acid, molybdosiliconic acid and tungstosiliconic acid as electroactive materials for ionometric sensor controls. These ISSs have a linear response to drotaverine hydrochloride over the range 8×10^–6 to 5×10^–2 mol L^–1 with cationic slopes from 51 to 58 mV per concentration decade. These ISSs have a fast response time (up to 1 min), a low determination limit (down to 4.3×10^–6 mol L^–1), good stability (3–5 weeks), and reasonable selectivity. Permeabilities and ion fluxes through a membrane were calculated for major and interfering ions. Dependences of the transport properties of the membranes on the concentrations of the ion exchanger and near-membrane solution and their electrochemical characteristics are presented. The ISSs were used for direct potentiometry and potentiometric titration (sodium tetraphenylborate) of drotaverine hydrochloride. Results with mean accuracy of 99.1±1.0% of nominal were obtained which corresponded well to data obtained by use of high-performance liquid chromatography.     

New unsaturated polyesters as injectable drug carriers

New unsaturated polyesters of poly(fumaric acid-glycol-sebacic acid) copolymers and poly(maleic anhydride-glycol-sebacic acid) copolymers were prepared by melt polycondensation of the corresponding mixed monomers: sebacic anhydride, fumaric acid or maleic anhydride and glycol. Methyl-methacrylate (MMA) was used as crosslinker and dimer acid was used as thinner.In vitro studies showed that those copolymers are degradable in phosphate buffer at 37 °C and poly(fumaric acid-glycol-sebacic acid) has proper drug release rate as drug carriers. The biocompatibility of poly(fumaric acid-glycol-sebacic acid) copolymers under mice skin was also evaluated; macroscopic observation and microscopic analysis demonstrated that the copolymer is biocompatible and well tolerated in vivo. The injected poly(fumaric acid-glycol-sebacic acid) [molar ratio M_{fumaric acid}:M_glycol:M_{sebacic acid} = 1.75:2.20:0.25] containing 5% adriamycin hydrochloride (ADM) in the mice bearing Sarcoma-180 tumor exhibited a good antitumor efficacy. The volume doubling time (VDT) (18 ± 2.5 days) of the tumor growth by this treatment was longer than that (7 ± 0.9 days) by the subcutaneous injection of ADM.     

Simultaneous Determination of Enalapril and Enalaprilat in Human Plasma by LC-MS: Application to a Bioequivalence Study

A rapid, simple and specific liquid chromatography-electrospray ionization mass spectrometry (LC-ESI-MS) method has been developed and validated for the simultaneous determination of enalapril and its major active metabolite enalaprilat in human plasma. Benazepril hydrochloride was used as the internal standard. Plasma was deproteinized with acetone and centrifuged. The supernatant was transferred and evaporated to dryness and the residue dissolved in mobile phase. Samples were separated on a C18 column with a mobile phase of methanol–20 mM ammonium acetate (53:47, v/v) containing 0.15% trifluoracetic acid (v/v) with a pH of 3.0. Enalapril, enalaprilat and the internal standard were measured by electrospray positive selective ion monitoring mode. The method was validated over a linear range of 1.56–400 ng mL⁻¹ and the limits of quantification were 1.56 ng mL⁻¹ for both enalapril and enalaprilat using 0.1 mL plasma. Extraction efficiency was more than 84% and recoveries were in range of 93.65–101.17%. The intra-day relative standard deviations (RSD) were less than 8.16 and 7.05% and inter-day RSDs were within 8.42 and 5.72% for enalapril and enalaprilat, respectively. The storage stability of QC samples was investigated under various conditions. The method was successfully applied for the evaluation of the pharmacokinetics and bioequivalence of enalapril and enalaprilat in 20 healthy volunteers after an oral dose of 20 mg enalapril maleate.     

Validation of a direct non-destructive quantitative analysis of amiodarone hydrochloride in Angoron formulations using FT-Raman spectroscopy

Raman spectroscopy was applied for the direct non-destructive analysis of amiodarone hydrochloride (ADH), the active ingredient of the liquid formulation Angoron^®. The FT-Raman spectra were obtained through the un-broken as-received ampoules of Angoron^®. Using the most intense vibration of the active pharmaceutical ingredient (API) at 1568 cm⁻¹, a calibration model, based on solutions with known concentrations, was developed. The model was applied to the Raman spectra recorded from three as-purchased commercial formulations of Angoron^® having nominal strength of 50 mg ml⁻¹ ADH. The average value of the API in these samples was found to be 48.56 ± 0.64 mg ml⁻¹ while the detection limit of the proposed technique was found to be 2.11 mg ml⁻¹. The results were compared to those obtained from the application of HPLC using the methodology described in the European Pharmacopoeia and found to be in excellent agreement. The proposed analytical methodology was also validated by evaluating the linearity of the calibration line as well as its accuracy and precision. The main advantage of Raman spectroscopy over HPLC method during routine analysis is that it is considerably faster and no solvent consuming. Furthermore, Raman spectroscopy is non-destructive for the sample. However, the detection limit for Raman spectroscopy is much higher than the corresponding for the HPLC methodology.     

An unexpected reaction of 2-(cyclopent-2-enyl)aniline hydrochloride with dimethyldioxirane

An unusual direction of the reaction of 2-(cyclopent-2-enyl)aniline hydrochloride with dimethyldioxirane was found: the formation of two isomeric products,viz., 3- and 6-chloro-2-(cyclopent-2-enyl)anilines, was observed. Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 8, pp. 1654–1655, August, 1998.     

Application of microcalorimetry to the formulation study

Isothermal microcalorimetry was used to evaluate excipient compatibility of solid dosage form. Oxybutynin hydrochloride and cefaclor were used as model drugs for compatibility test with excipients. The calorimetric data for compatibility test were compared with those of HPLC data. Evaluation of compatibility between drug and excipient of solid dosage form might be possible to use isothermal microcalorimetry instead of conventional method. By using microcalorimetric method, the evaluation of the compatibility between drug and excipient could be successfully performed with a simple operation in a short time. The application of the isothermal microcalorimetry would be useful for the screening test of the drug compatibility with excipients.     

Optimized POCl3-assisted synthesis of 2-amino-1,3,4-thiadiazole/1,3,4-oxadiazole derivatives as anti-influenza agents

Although recent decades have witnessed the synthesis of 1,3,4-thiadiazoles via phosphorus POCl₃-promoted cyclization reaction, simultaneous access to 2-amino-1,3,4-thiadiazole and 2-amino-1,3,4-oxadiazole analogs remains unexpected and elusive. Herein, a detailed regiocontrolled synthesis of 2-amino-1,3,4-thiadiazoles in good to high yields with good regioselectivities from readily available thiosemicarbazides using POCl₃ was disclosed. Meantime, to establish a comprehensive structure–activity relationship, 2-amino-1,3,4-oxadiazole derivatives as single regioisomers were prepared via EDCI·HCl-triggered cyclization of the thiosemicarbazide intermediates. The in vitro anti-influenza assays proved that the selected compounds with the pyrazine/pyridine ring exhibited certain inhibitory activities against influenza A virus strains A/HK/68 (H3N2) and A/PR/8/34 (H1N1) in MDCK cells. Among them, N-(adamantan-1-yl)-5-(5-(azepan-1-yl)pyrazin-2-yl)-1,3,4-thiadiazol-2-amine (4j) was the most active compound, and exhibited favorable activity with EC₅₀ values of 3.5 μM and 7.5 μM, respectively. In addition, the molecular docking results explained the reason why compound 4j had dual inhibitory activity and revealed the reasonable binding mode of this compound with the M2-S31N and M2-WT ion channels. This compound had the potential to be further developed as an anti-influenza drug.     

Conjugate base catalysed one-pot synthesis of pyrazoles from β-formyl enamides

A novel one-pot synthesis of pyrazoles has been accomplished by the reaction of β-formyl enamides with hydroxylamine hydrochloride catalysed by potassium dihydrogenphosphate in acid medium.