基于DIS系统对弹簧牵动磁体振动产生电磁感应对应参量研究

使用悬挂螺旋弹簧牵动磁体振动,在线圈内产生感应电动势的方法,将弹簧的机械振动转换为电磁振动,使弹簧机械振动的各参量转换为一一对应的电磁参量,用DIS数字化信息系统测量各电磁参量,从而展开分析研究。     

Tuning the band-gap of phononic crystals with an initial stress

The mechanism for the shift of the band-gap in two kinds of finite phononic crystals (PCs) (steel/epoxy and aluminum/epoxy) with different initial stresses is studied experimentally and theoretically. The experimental results and theoretical analysis simultaneously indicate that the initial stress will efficiently tune the location and width of the band-gap. The current work provides a basis for tuning the band-gap of phononic crystals in engineering applications.     

采用磁致伸缩逆效应原理测定Hopkinson杆的应力变化率

利用Villari效应,以非接触方式测得不同撞击速度下Hopkinson杆的应力变化率波形,并介绍了传感器的标定方法。     

含中心裂纹任意截面柱体扭转时的应力强度因子计算

本文提出了一组应力函数,采用边界配置方法计算了含中心裂纹不同截面形状柱体扭转时的应力强度因子。有关椭圆截面柱体的算例表明,本文方法具有良好的精度。同时,文中给出了圆、椭圆和矩形等不同截面柱体的计算结果。     

Measurement of the Dynamic Bulk and Shear Response of Soft Human Tissues

Traditionally, Kolsky bars are used to study the dynamic response of hard materials in uniaxial compression, tension or torsion. We present modifications to the technique that allow loading of a soft tissue specimen in (a) hydrostatic compression and (b) simple shear. The first modification is designed to determine the pressure vs. volume behavior of each material, and thence to extract a measure of the dynamic compressibility or equivalently of the bulk modulus. The second modification is designed to develop the shear stress versus shear strain behavior for a near-simple shear experiment. The critically important questions of the proper acquisition of human tissue samples and protocols for appropriate experimentation have also been addressed. The experimental techniques and the results are discussed in detail and the results compared to finite element simulations. We present examples of the dynamic response of typical tissue simulants as well as human liver and stomach tissues.     

An experimental method for considering dispersion and attenuation in a viscoelastic Hopkinson bar

An experimental method is developed to perform Hopkinson tests by means of viscoelastic bars by considering the wave propagation attenuation and dispersion due to the material rheological properties and the bar radial inertia (geometric effect). A propagation coefficient, representative of the wave dispersion and attenuation, is evaluated experimentally. Thus, the Pochhammer and Chree frequency equation is not necessary. Any bar cross-section shapes can be employed, and the knowledge of the bar mechanical properties is useless. The propagation coefficients for two PMMA bars with different diameters and for an elastic aluminum alloy bar are evaluated. These coefficients are used to determine the normal forces at the free end of a bar and at the ends of two bars held in contact. As an application, the mechanical impedance of an accelerometer is evaluated. A part of this work has been performed in the Laboratoire Matériaux Endommagement Fiabilité of the Ecole Nationale Supérieure des Arts et Métiers de Bordeaux.     

Strain-rate history effects and microstructural aspects in lithium fluoride and aluminium single crystals after dynamic loading

Single crystals of LiF and Al are deformed in shear at a number of constant strain-rates in the range 10^–4 to 1600 s^–1. These constant rate tests are supplemented by a series of jump tests in which a sharp increment in strain rate is imposed during the quasi-static straining. Dislocation arrangements are observed by etch-pits technique for LiF crystals and by TEM for Al crystals. It is shown that cell sizes vary inversely with flow stress and strain-rate sensitivity.     

一类非均质变截面弹性直杆纵向振动的精确解

本文应用可积的一类线性微分方程求出了非均质变截面弹性直杆振动问题的一个精确解,我们应用这一精确解验证了渐近解的精确度。     

某船用钢动态弹塑性断裂韧性的试验测试

描述了利用Hopkinson压杆技术加载三点弯曲试样测试材料动态弹塑性断裂韧性的试验方法。材料的动态应力－应变行为测试在SHPB装置上进行，试样上的动态载荷历史由Hopkinson压杆直接测得，在此基础上，利用自行编制的ANSYS宏程序计算得到J积分历史；与起裂时间相对应的J积分值，即为动态弹塑性断裂韧性。采用上述方法进行了某船用钢的动态断裂试验，首次获得了该钢的动态弹塑性断裂韧性值，为舰船的抗爆能力计算，防动态断裂设计和安全评定提供了基础数据。     

单脉冲加载的Hopkinson扭杆装置

分析了反复加载现象及其对变形微结构的影响，介绍了对现有标准Ｈｏｐｋｉｎｓｏｎ扭杆的改进。改进后的新型Ｈｏｐｋｉｎｓｏｎ扭杆是具有特殊设计的加载头和传动器的四杆系统，它完全消除了应力波的反复加载效应，实现了过程的单脉冲加载。改进前后的实验波形和变形局部化微结构形态的比较证实了改进的有效性。