Preparation and characterization of silicate gel glasses containing Cr2O3

The effect of thermal treatment on the structural incorporation of Cr₂O₃ in xCr₂O₃·(100 – x)SiO₂ and 5R _n O·xCr₂O₃·(95 – x)SiO₂ (where x=0.01–1 mol.% and R=Li, Na and Ca) gel glasses was studied by optical absorption spectrophotometry, DTA-TG, XRD and electron microscopy.Samples heat treated at 60°C have green color due to the presence of Cr³⁺ in octahedral coordination. The optical transmission, and color (yellow, orange or ambar), of the samples heat treated between 200 and 700°C prove that Cr³⁺ (octahedrally coordinated) and Cr⁶⁺ (tetrahedrally coordinated) are both present. Segregation of Cr₂O₃ take place at temperatures above 800°C.In reducing conditions the gel glasses were green due to the presence of a high content of Cr³⁺ ions. Samples containing Li or Na show crystalline phases at temperatures below 850°C.     

Carboxylic acid functionalization of nylon 6 by radiation grafting and conversion to zinc salts: Effects on physical properties

 Functionalization of polymers by grafting monomeric species on to the backbone of molecular chains with the use of γ-radiation has been used extensively. In this work methacrylic acid was grafted onto a commercial grade of polycaproamide (Nylon 6) by preirradiating the polymer granules to 15 kGy at a rate of 1.0 kGy per hour and subsequently immersing these in a 10% aqueous solution of methacrylic acid in the presence of small quantities of FeSO₄ as homopolymerization inhibitor. The polymer was subsequently neutralized by mixing it with zinc acetylacetonate in a laboratory scale melt mixing device. The acid-grafting polymer modification resulted in an increase in glass transition temperature, while the addition of zinc acetylacetonate gave rise to two transitions: The lower transition corresponds to a miscible mixture of free polyamide and acid-grafted polymer, both plasticized with undecomposed zinc compound, while the upper transition corresponds to the zinc salt of the acid grafted polyamide. Through rheological measurements it was shown that both the acid-grafted polymer and the derived zinc salt have a branched structure, possibly containing also some crosslinked domains. Large improvements in solvent resistance were observed for both type of polymer modifications. Received: 13 December 1996 Accepted: 10 February 1997     

Modulated differential scanning calorimetry in the glass transition region

Temperature-modulated calorimetry (TMC) allows the experimental evaluation of the kinetic parameters of the glass transition from quasi-isothermal experiments. In this paper, model calculations based on experimental data are presented for the total and reversing apparent heat capacities on heating and cooling through the glass transition region as a function of heating rate and modulation frequency for the modulated differential scanning calorimeter (MDSC). Amorphous poly(ethylene terephthalate) (PET) is used as the example polymer and a simple first-order kinetics is fitted to the data. The total heat flow carries the hysteresis information (enthalpy relaxation, thermal history) and indications of changes in modulation frequency due to the glass transition. The reversing heat flow permits the assessment of the first and higher harmonics of the apparent heat capacities. The computations are carried out by numerical integrations with up to 5000 steps. Comparisons of the calculations with experiments are possible. As one moves further from equilibrium, i.e. the liquid state, cooperative kinetics must be used to match model and experiment.On leave from Toray Industries, Inc., Otsu, Shiga 520, Japan.This work was supported by the Division of Materials Research, National Science Foundation, Polymers Program, Grant # DMR 90-00520 and the Division of Materials Sciences, Office of Basic Energy Sciences, U. S. Department of Energy at Oak Ridge National Laboratory, managed by Lockheed Martin Energy Research Corp. for the U. S. Department of Energy, under contract number DE-AC05-96OR22464. Support for instrumentation came from TA Instruments, Inc. Research support was also given by ICI Paints, and Toray Industries, Inc.     

HPLC of amino acids and oligopeptides by pre-column fluorescence derivatization with N-hydroxysuccinimidyl-α-(9-phenanthrene)-acetate

Summary A sensitive LC method for the detection of amino acids and oligopeptides with pre-column fluorescence derivatization has been developed. Glycine, glycylglycine, triglycine, glutathione, glutamic acid, and cysteine were separated on a reversed-phase C₁₈ column with methanol-water-triethylamine eluent, derivatization and chromatographic conditions were optimized. The six derivatives were eluted in 20 min with good reproducibility. The relative standard derviations (n=6) at an analytical concentration of 2×10⁻⁶ M are <5%. Detection limits (signal-to-noise ratio=3) for the six derivatives are 23–68 fmol.     

火焰原子吸收光谱法测定天然气转化催化剂中的氧化钾

建立火焰原子吸收光谱法测定天然气转化催化剂中氧化钾的分析方法.该方法将催化剂样品和助溶剂四硼酸锂熔融后再用盐酸溶解定容,采用火焰原子吸收光谱仪对样品溶液进行测定.在优化的实验条件下,钾离子的质量浓度在0.05～0.50 mg/L范围内与吸光度呈良好线性关系,相关系数为0.9995.钾的方法检出限为0.001mg/L,定...     

二溴羟基苯基荧光酮荧光熄灭法测定微量钼

本文用荧光熄灭法研究了十溴羟基苯基荧光酮(DBH-PF)-溴化十六烷基三甲铵(CTMAB)-Mo(Ⅵ)体系的测定方法及条件。在0.002～0.008mol/L的H_3PO_4介质中,在CTMAB存在下,钼(Ⅵ)与试剂形成1:2的桔红色络合物,其最大激发波长为470nm和502nm,最大发射波长为520nm。钼在0.03～0.50μg/25ml范围内具有线性关系,检出限为0.03μg/25ml。本法灵敏度高,选择性好,用于检测合金钢中的微量钼,结果满意。     

“Anhydrolycaconitine”, a new diterpene alkaloid fromAconitum septentrionale K

A new alkaloid, anhydrolycaconitine (C₃₆H₄₆N₂O₉), was isolated from roots ofAconitum septentrionale K. Based on the results of¹H and¹³C NMR and IR spectroscopy and mass spectrometry of the alkaloid and the product of its alkaline hydrolysis and on the data of X-ray diffraction analysis of the hydrolysis product, the structure of 1α, 6β, 14α, 16β-tetramethoxy-7-oxo-18-succinylanthranoyloxy-17-(7→8)abeo-aconane was assigned to anhydrolycaconitine. Published inIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 9, pp. 1640–1644, September, 2000.