Solubility parameter determination of cationic surfactants by inverse GC

Summary The solubility parameters of cationic surfactants were obtained using the inverse gas chromatographic technique. The surfactants didodecyl dimethyl ammonium bromide, dioctadecyl dimethyl ammonium bromide and dodecyl pyridinium chloride were used as stationary phase and retention data of different probe solutes were measured at different temperatures. The results were analysed by the combination of Flory-Huggins and Hildebrand theories, and the solubility parameters of the surfactants were obtained in a range of temperatures between 80–120°C.     

An inverse spectral problem for a nonsymmetric differential operator: Reconstruction of eigenvalue problem

In this paper, an algorithm is established to reconstruct an eigenvalue problem from the given data satisfying certain conditions. These conditions are proved to be not only necessary but also sufficient for the given data to coincide with the spectral characteristics corresponding to the reconstructed eigenvalue problem.     

Modeling hyperelastic behavior of rubber: A novel invariant‐based and a review of constitutive models

A constitutive phenomenological model completing the Gent‐Thomas concept is carried out to formulate laws governing the hyperelastic behavior of incompressible rubber materials. It is shown that the phenomenological Gent‐Thomas model (1958) and the constrained chain model (1992) give similar precise results at small to moderate deformation. On the other hand, comparisons of the outcome of the proposed model with that of the molecular model from the combined concepts of Flory‐Erman and Boyce‐Arruda (2000), and with those of the phenomenological models of Ogden (1982), Yeoh‐Fleming (1997), Pucci‐Saccomandi (2002) and Beda (2005) are made. Residual inconveniences raised by attractive continuum models in rubber elasticity literature have been successfully overcome. Results from both the statistical and phenomenological mechanics concepts are compared with the data of some useful classical materials (rubbers of Treloar, Rivlin‐Saunders, Pak‐Flory and Yeoh‐Fleming). The results permit one to see salient equivalence of the two theories for a more reliable prediction of stress‐stretch response for all states of any mode of deformation. A complete and exhaustive analysis of the Mooney plot that combines small and very large extension‐compression has been quite essential in assessing the validity of models. A method of identification of material parameters is presented and data of the simple tension suffice for the determination of the parameter values. It is shown that the ordinary identification procedures, such as the usual least squares, a very much used numerical method in materials investigation, can be unsuitable in some cases of hyperelastic modeling. © 2007 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 45: 1713–1732, 2007     

Infinite propagation speed of the Camassa-Holm equation

We use the inverse scattering transform to show that a solution of the Camassa-Holm equation is identically zero whenever it vanishes on two horizontal half-lines in the x-t space. In particular, a solution that has compact support at two different times vanishes everywhere, proving that the Camassa-Holm equation has infinite propagation speed.     

粒子鉴别中dE/dx和TOF的权重

在北京谱仪数据分析中,粒子鉴别使用了dE/dx和TOF的信息.在利用dE/dx和TOF联合鉴别粒子时,通常的做法是把两者的χ²值等权重相加(χ²方法).在不同的动量区间,dE/dx和TOF对粒子的鉴别能力不同.本文给出两者联合鉴别时不同动量区间的权重,并构造一个新的线性变量来进行粒子鉴别     

Identification of micro-scale calorimetric devices II

The miniaturized calorimetric devices furnish a reduced working flat surface and permits measurements with extremely low-mass quantities. The experimental sensitivity shows relevant position dependence with x-y surface coordinates and with z-distance. The device identification is realized via a 2-D model based in Fourier general equation. Using the Marquardt method the experimental flat surface device can be identified and the fitted parameters used to simulate the behavior of the experimental system. From the model, the effects of several dissipation configurations can be evaluated. Also, via the RC-analogy, a way to 3-D experimental devices is roughly described. This revised version was published online in July 2006 with corrections to the Cover Date.     

Comparisons of pharynx, source, formant, and pressure characteristics in operatic and musical theatre singing

Belting, a vocal technique typically cultivated in musical theatre singing, differs timbrally from operatic singing in many interesting respects. The underlying phonatory differences have not been previously investigated in detail. Yet, belting is frequently associated with disturbances of voice function. Articulatory and phonatory characteristics are investigated in a female subject who is a professional singer (co-author JL) trained in both the operatic and belting styles and in an intermediate vocal technique (“mixed”). This article presents data obtained from this subject by video-fiberoptic observation of the pharynx, inverse filtering of airflow, and measurement of subglottal pressure. The results reveal that belting was characterized by very high subglottal pressures and sound levels, and apparently also by a comparatively high degree of glottal adduction. Comparisons with other investigations of related aspects of belting and operatic singing support the assumption that the data obtained from our subject are representative for these vocal techniques.     

A study of type I intermittency of a circular differential equation under a discontinuous right-hand side

In this paper we study a circular differential equation under a discontinuous periodic input, developing a quadratic differential equations system on S¹ and a linear differential equations system in the Minkowski space M³. The symmetry groups of these two systems are, respectively, PSOo(2,1) and SOo(2,1). The Poincaré circle map is constructed exactly, and a critical value αc of the parameter is identified. Depending on α of the input amplitude the equation may exhibit periodic, subharmonic or quasiperiodic motions. When α varies from α>αc to α<αc, there undergoes an inverse tangent bifurcation; consequently, the resultant Poincaré circle map offers one route to the quasiperiodicity via a type I intermittency. In the parameter range of α<αc the orbit generated by the Poincaré circle map is either m-periodic or quasiperiodic when n/m is a rational or an irrational number.     

Binding energy of impurity states in an inverse parabolic quantum well under magnetic field

 We have investigated the effects of the magnetic field which is directed perpendicular to the well on the binding energy of the hydrogenic impurities in an inverse parabolic quantum well (IPQW) with different widths as well as different Al concentrations at the well center. The Al concentration at the barriers was always x_max=0.3. The calculations were performed within the effective mass approximation, using a variational method. We observe that IPQW structure turns into parabolic quantum well with the inversion effect of the magnetic field and donor impurity binding energy in IPQW strongly depends on the magnetic field, Al concentration at the well center and well dimensions.     

Inverse Piston Problem for the System of One-Dimensional Isentropic Flow

In this paper, the authors consider the inverse piston problem for the system of one-dimensional isentropic flow and obtain that, under suitable conditions, the piston velocity can be uniquely determined by the initial state of the gas on the right side of the piston and the position of the forward shock.