Volumetric properties of ethanol–water mixtures under high temperatures and pressures

The densities of ethanol and ethanol–water mixtures were measured with a vibrating tube densimeter at 25.0, 50.0 and 75.0 °C in the pressure range from 0.10 to 40.00 MPa. Densities were correlated using an empirical model. Partial molar volumes, excess molar volumes, isothermal compressibilities, cubic expansion coefficients and internal pressures were calculated from obtained densities. This study reports the dependence of densities, partial molar volumes, excess molar volumes, isothermal compressibilities, cubic expansion coefficients and internal pressures on composition, temperature and pressure.     

PHBV/HA骨修复材料的研究

利用硝酸钙与磷酸钠的水溶液制备羟基磷灰石(HA)，同时在HA生成过程中与聚羟基丁酸一戊酸酯(PHBV)复合，探索了HA增强PHBV使之适于作为骨修复材料的一种新途径。结果表明，HA的均匀分散增进了复合材料中两相问的相互结合，能明显地提高复合材料的力学性能。     

Detection of banned meat and bone meal in feedstuffs by near-infrared microscopic analysis of the dense sediment fraction

In this paper we present an alternative method for detection of meat and bone meal (MBM) in feedstuffs by near-infrared microscopic (NIRM) analysis of the particles in the sediment fraction (dense fraction (d >1.62) from dichloroethylene) of compound feeds. To apply this method the particles of the sediment fraction are spread on a sample holder and presented to the NIR microscope. By using the pointer of the microscope the infrared beam is focussed on each particle and the NIR spectrum (1112–2500 nm) is collected. This method can be used to detect the presence of MBM at concentrations as low as 0.05% mass fraction. When results from the NIRM method were compared with the classical microscopic method, a coefficient of determination (R²) of 0.87 was obtained. The results of this study demonstrated that this method could be proposed as a complementary tool for the detection of banned MBM in feedstuffs by reinforcement of the monitoring of feeds.     

ICP－AES中内标法的应用研究 Ⅲ．用内标法校正基体干扰

通过观测基体对分析元素发射强度的干扰情况，分析干扰机制，从而确定用来校正基体干扰的内标元素与分析元素的匹配条件。实验结果表明，只要选择合适的内标元素，可以校正基体干扰。     

Dicholorbenzyl alkyl ether homologs as retention index markers and internal standards for the analysis of environmental samples using capillary gas chromatography

A homologous series of 2,4-dichlorobenzyl alkyl ethers (DCBEs) have been synthesized and purified for use as retention index calibrants and internal standards. They are stable, sensitive to ECD and FID and ideal for GC-MS, with base peaks at m/z 159/161. The retention index calibration against the n-alkanes for a linear temperature program (LTP) series is given and recommendations made for the most suitable members of the DCBE series for use as internal standards in organochlorine (OC) residue analysis.     

Theoretical Study of the Photochemical Reaction Mechanism of Bicyclo [4.1.0 ] heptane

IntroductionPhotochemical reactions, which involve a three-membered ring, have been of great interest to experi-mental photochemists[1—10]. A main reason for thisphenomenon is that the cyclopropane ring exhibits somereaction characteristics of double bon…     

Hydroxyapatite-poly(d,l-lactide) Nanografts. Synthesis and Characterization as Bone Cement Additives

This paper reports the creation of hydroxyapatite/polyester nanografts by “graft-from” polymerization of d,l-lactide with [Ca₅(OH)(PO₄)₃]₂ as the initiator and tin(II)-2-ethylhexanoate as the catalyst. Model polymerizations were performed with cyclooctanol as initiator to confirm the grafting on the surface of the hydroxyapatite nanocrystals. Polymers with the highest molecular mass (M_n) between 4250 Da (cyclooctanol) and 6100 Da (hydroxyapatite) were produced. In both cases the molecular mass distributions of the polymers formed were monomodal. The materials obtained were characterized by size-exclusion chromatography, NMR and FT-IR spectroscopy, and thermal methods. Their suitability as additives for commercial bone cement (Simplex P Speedset, Stryker Orthopaedics) has been confirmed by thermal analysis techniques and mechanical testing. The results obtained show that addition of the hydroxyapatite/ polyester nanografts improved both thermal and mechanical properties of the bone cement.     

Symmetry numbers and chemical reaction rates

This article shows how to evaluate rotational symmetry numbers for different molecular configurations and how to apply them to transition state theory. In general, the symmetry number is given by the ratio of the reactant and transition state rotational symmetry numbers. However, special care is advised in the evaluation of symmetry numbers in the following situations: (i) if the reaction is symmetric, (ii) if reactants and/or transition states are chiral, (iii) if the reaction has multiple conformers for reactants and/or transition states and, (iv) if there is an internal rotation of part of the molecular system. All these four situations are treated systematically and analyzed in detail in the present article. We also include a large number of examples to clarify some complicated situations, and in the last section we discuss an example involving an achiral diasteroisomer.     

STUDY ON HIGHLY ACTIVE ZIEGLERNATTA CATALYSTS FOR POLYMERIZATION OF OLEFINS

In this paper, highly active Ziegler-Natta catalysts of MgCl_2 supported TiCl_4 for synthesis ofpolyolefins, using di-n-butyl phthalate (DNBP) as internal donor and diphenyl dimethoxyl silane(DPDMS) as external donor, have been prepared. The conditions controlling the treatment ofsupport were studied. The interactions of various components present in the catalysts and theirinfluences on catalytic performance were investigated. It is found that by using DNBP and DPDMSas internal and external donors together the polymer products with higher isotactic index can beobtained. Plausible structure model and mechanism were proposed.     

Hydrolysis of cellobiose by immobilized β-glucosidase entrapped in maintenance-free gel spheres

A crude preparation of Aspergillus niger β-glucosidase (27.5 cello-biase U/mg protein at 40°C, pH 5.0) was immobilized on concanavalin A-Sepharose (CAS). The cellobiase activity of the immobilized enzyme was 1334 U/mg dried CAS or 108 U/mL CAS gel. The β-glucosidase-CAS complex was entrapped within crosslinked propylene glycol alginate/bone-geletin gel spheres that possessed between 0.67 and 2.35 cellobiase U/mL spheres, depending on their size. The effect of cellobiose concentration (10–300 mM) on the activity of native, immobilized, and gel-entrapped enzyme was determined. It was shown that concentrations of cellobiose between 10 and 180 mM were not inhibitory to the entrapped enzyme, although inhibition was found to occur with the native and immobilized enzyme. Exogenous ion addition was not necessary to maintain the structural integrity of the spheres, which were stable for 4 d at 40°C.