Interactions between synthetic and indigenous naphthenic acids and divalent cations across oil–water interfaces: effects of addition of oil-soluble non-ionic surfactants

Interactions between naphthenic acids and divalent metal cations across model oil–alkaline water interfaces were investigated by correlating changes in dynamic interfacial tension (IFT), to plausible reaction mechanisms. The measurements were carried out by using a CAM 200 optical instrument, which is based on the pendant drop technique. The naphthenic acids used were synthesised model compounds as well as commercial acid mixtures from crude distillation and extracted acid fractions from a North Sea crude oil. The divalent cations involved Ca²⁺, Mg²⁺, Sr²⁺, and Ba²⁺, which are all common in co-produced formation water and naphthenate deposits. The results show that the dynamic IFT strongly depends on naphthenic acid structure, type of divalent cation, and the concentration of the compounds as well as the pH of the aqueous phase. Introducing divalent cations to systems involving saturated naphthenic acids caused mostly a permanent lowering of the IFT. The decline in IFT is due to electrostatic attraction forces across the interface between the cations in the aqueous phase and the carboxylic-groups at the o/w interface, which cause a higher interfacial density of naphthenic acid monomers. The permanent lowering in IFT is likely due to formation of positively charged monoacid complexes, which possess high interfacial activity. On the other hand, in the case of the aromatic model compounds, the cations affected the IFT differently. This is mainly discussed in light of degree of cation hydration and steric conditions. Various oil-soluble non-ionic surfactant mixtures were also introduced to systems involving a model naphthenic acid and Ca²⁺ in order to investigate how the interfacial competition affected the local interactions. Based on the behaviour of dynamic IFT, probable inhibition mechanisms are discussed.Electronic Supplementary Material Supplementary material is available for this article at     

Enantiomeric analysis of rivastigmine in pharmaceuticals by cyclodextrin-modified capillary zone electrophoresis

Chiral separation method development is usually very time-consuming due to the diversity in chemical structures of pharmaceutical drug substances as well as the suitable separation conditions and the problem to choose the appropriate chiral selector. This paper shows capillary zone electrophoresis (CZE) which was developed for chiral separation of a basic compound - rivastigmine (RIV) using 30 cm × 50 μm i.d. polyacrylamide (PAA)-coated fused-silica capillary (effective length 20 cm), amine-modified phosphate buffer of pH 2.5 and sulfated-β-CD (S-β-CD) as chiral selector. Other selected native or derivatized cyclodextrins (CDs) were also tested: β-CD (5, 30 mM), carboxymethyl-β-CD (5, 30 mM), dimethyl-β-CD (15 mM), hydroxypropyl-β-CD (5, 30 mM), hydroxypropyl-α-CD (5, 30 mM) and hydroxypropyl-γ-CD (5, 30 mM). Complete enantiomeric separation of RIV was achieved at 20 kV, 18 °C and detection at 200 nm within 8 min with R.S.D. for the absolute migration time reproducibility of less than 2.1%. Rectilinear calibration range was 5.0-500.0 μM of each enantiomer (r = 0.9994-0.9995). The CZE method proposed was used for the control of chiral purity of pharmaceutically active S-RIV and for the analysis of Exelon caps preparation.     

Capillary Zone Electrophoresis of Eleven Priority Phenols with Amperometric Detection

A scheme for separation and detection of eleven priority phenols using capillary zone electrophoresis (CZE) coupled with amperometric detection is described. With a capillary of I.D. 50 μm and length 62.5 cm at 9 kV and an electrophoretic buffer of 20 mM CHES (pH 10.1), complete separation of the eleven compounds was achieved in less than 17 min. Amperometric detection was carried out using a carbon fiber microelectrode of diameter 9 μm inserted into the end of the detection capillary. Linearity over two orders of magnitude was generally obtained for the eleven priority phenols. With an electrode potential+1.10 V (vs. Ag/AgCl reference), the concentration limits of detection were in the sub-ppm (10^?6 M) level. This method was successfully applied to analysis of priority phenols in industrial waste water.     

合并带流动注射分光光度法研究硫羟乳酸掩蔽性能

本文运用合并带流动注射分析技术，建立了以Ｙｂ＾３＋ＸＯ显色体系为参考体系研究硫羟乳酸掩蔽性能的方法，在ｐＨ５．６硫羟乳酸能掩蔽Ｓｎ＾４＋，Ｂｉ＾３＋，Ｔｌ＾３＋，Ｈｇ＾２＋，Ｃｕ＾２＋，Ｃｒ＾３＋和Ｃｄ＾２＋测定Ｙｂ＾３＋的线性范围为１．３６×１０＾－６～２．７２×１０＾－５ｍｏｌ／Ｌ，采样频率可达１２０次／ｈ。     

Structural effects in electron transfer reactions: comparative interfacial electrochemical kinetics for cis- versus trans-dioxorhenium(V)(bi)pyridine oxidation

The comparative interfacial oxidation kinetics of the approximate structural isomers trans-(O)₂Re^V(py)⁺₄ and cis-(O)₂Re^V(bpy)(py)⁺₂ (py, pyridine; bpy, 2,2′-bipyridine) have been assessed in aqueous solution via conventional cyclic voltammetry at a highly ordered pyrolytic graphite (HOPG) electrode. HOPG was employed because of its known propensity to diminish interfacial electron transfer (ET) rates (by ca. three to four orders of magnitude) and because of a probable lack of importance of kinetic work terms (diffuse double-layer corrections). Measured rates for the trans complex exceed those for the cis by about a factor of 3. Expressed as an effective activation Gibbs energy difference ΔG^*, this corresponds to a cis-trans difference of ca. 3 kJ mol⁻¹. The actual vibrational barriers to ET have determined from a combination of published X-ray structural results (trans complex) and new resonance Raman results (cis complex). The values are 0.6 kJ mol ⁻¹ for the trans oxidation and 4.4 kJ mol⁻¹ for the cis oxidation (i.e. close to the barrier difference inferred from rate measurements). Further analysis shows that most of the barrier difference is associated with displacement of a (predominantly) Re-N(bpy) stretching mode found only in the cis system. Differences in metal-oxo displacements (cis > trans) are also implicated.     

Chiral Recognition of Phenylacetic Acid Derivatives by Aminated Cyclodextrins

Chiral recognition of mandelic acid ( 1), acetylmandelic acid ( 2), 1-methoxyphenylacetic acid ( 3), phenylsuccinic acid ( 4), 2-phenylpropanoic acid ( 5) and ibuprofen ( 6) in their anionic forms by protonated 6A-amino-6A-deoxy--cyclodextrin (mono-NH3+--CD) and 6A,6D-diamino-6A,6D-dideo xy--cyclodextrin (di-NH3+--CD) has been studied by means of capillary zone electrophoresis (CZE) and 1H NMR spectroscopy. Both methods show the preferable guests for mono-NH3+--CD to be the (R)-enantiomers of 1, 3 and 5 and the (S)-enantiomers of 2, 4 and 6. Cooperative work of Coulomb interactions and inclusion is essential for chiral recognition of these anionic guests.     

Determination of rimantadine in pharmaceutical preparations by capillary zone electrophoresis with indirect detection or after derivatization

Summary Rimantadine is synthetic analog of amantadine; both are antiviral agents used for prophylaxis and treatment of influenza A. A capillary zone electrophoretic (CZE) procedure for the determination of rimantadine has been developed. As the direct determination of rimantadine is poorly sensitive because the compound is almost transparent in the UV/Vis range, several indirect methods were studied. Two were found to be the particularly useful: (a) indirect detection using 5 mM 4-methylbenzylamine in 1:4 methanol-water as absorbing background electrolyte, with detection at 210 nm, and (b) derivatization of rimantadine with 1,2-naphthoquinone-4-sulfonic acid in alkaline medium and subsequent determination of the derivative by CZE (40 mM tetraborate, pH 9.2, detection at 280 nm). Uncoated capillary tubing, 44 cm length ×75 μM i.d., was used for both determinations. The detection limits were 0.1 and 2 ppm for methods a and b, respectively. The methods were used to determine rimantadine in pharmaceutical products and for dissolution testing of Flumadin^? tablets.     

A quick method for the simultaneous determination of ascorbic acid and sorbic acid in fruit juices by capillary zone electrophoresis

A method of quickly determining ascorbic acid and sorbic acid by capillary zone electrophoresis with ultraviolet detection was developed. The choice of background electrolyte, wavelength, injection time and applied voltage were discussed. Ascorbic acid and sorbic acid were well separated in 80 mmol L⁻¹ boric acid-5 mmol L⁻¹borax (pH = 8.0) in 5 min at the detecting wavelength of 270 nm. Under the optimum condition, the method has linear ranges of 2.54-352.00 mg L⁻¹ for ascorbic acid and 1.08-336.39 mg L⁻¹ for sorbic acid with the detection limit of 1.70 mg L⁻¹ for ascorbic acid and 0.54 mg L⁻¹ for sorbic acid, respectively. Other organic acids in fruit juices have no effect on the detection. This method is very feasible and simple and can be used to detect ascorbic acid and sorbic acid in fruit juices.     

Imaging Magnetic Domain Structures with Soft X-Ray Microscopy

The current achievements in magnetic transmission soft X-ray microscopy will be reviewed. The magnetic contrast is given by X-ray magnetic circular dichroism (X-MCD), i.e., the dependence of the absorption coefficient of circularly polarized X rays on the projection of the magnetization in a ferromagnetic system onto the photon propagation direction. X-MCD contrast can reach, e.g., at L_2,3 edges in transition metals, large values up to 50%. Combined with a soft X-ray microscope where Fresnel zone plates acting as optical elements provide a lateral resolution down at 25 nm, it allows for imaging magnetic microstructures. Specific features of this photon-based technique are the recording of images in varying external magnetic fields, an inherent chemical specificity, a high sensitivity to thin magnetic layers, due to the large contrast, and the possibility to distinguish between in-plane and out-of plane contributions. In this report, recent results obtained with the XM-1 microscope at the ALS (Berkeley/CA) demonstrate the broad applicability of this novel experimental technique to both fundamental and technological relevant issues in nanomagnetism. The future potential will be briefly outlined.