The influence of radiation-induced vacancy on the formation of thin-film of compound layer during a reactive diffusion process

A theoretical approach is developed that describes the formation of a thin-film of AB-compound layer under the influence of radiation-induced vacancy. The AB-compound layer is formed as a result of a chemical reaction between the atomic species of A and B immiscible layers. The two layers are irradiated with a beam of energetic particles and this process leads to several vacant lattice sites creation in both layers due to the displacement of lattice atoms by irradiating particles. A- and B-atoms diffuse via these lattice sites by means of a vacancy mechanism in considerable amount to reaction interfaces A/AB and AB/B. The reaction interfaces increase in thickness as a result of chemical transformation between the diffusing species and surface atoms (near both layers). The compound layer formation occurs in two stages. The first stage begins as an interfacial reaction controlled process, and the second as a diffusion controlled process. The critical thickness and time are determined at a transition point between the two stages. The influence of radiation-induced vacancy on layer thickness, speed of growth, and reaction rate is investigated under irradiation within the framework of the model presented here. The result obtained shows that the layer thickness, speed of growth, and reaction rate increase strongly as the defect generation rate rises in the irradiated layers. It also shows the feasibility of producing a compound layer (especially in near-noble metal silicide considered in this study) at a temperature below their normal formation temperature under the influence of radiation.     

THERMAL BEHAVIOR OF PP/PA6 BLENDS UNDER DYNAMIC CONDITIONS. THE EFFECT OF DIFFERENT INTERFACIAL AGENTS BASED ON CHEMICALLY MODIFIED ATACTIC POLYPROPYLENE

The thermal behavior in dynamic conditions of polypropylene/polyamide 6 (PP/PA6) blends with a modified interphase is discussed in terms of the crystallinities of the polypropylene and polyamide components imposed by the processing step conditions and after removal of those constraints by holding the blends 5 min in the molten state in the calorimeter. As interfacial agents, two based on succinic anhydride or succinil-fluoresceine grafted atactic polypropylenes were used. The experimental program was run following the Box-Wilson experimental design methodology. Thermal scans were made using round samples (5 mm diameter and 100 μm thick) cut from compression-molded sheets with morphologies and macroscopic behavior studied previously. Changes of the amount of crystallinity of each polymer in the modified blends are contrasted with the tensile strength values of the heterogeneous materials as a whole; evidence of the different roles played by each interfacial agent acting at the interface among blend components is shown.     

Kinematics of layered reinforced-concrete planar beam finite elements with embedded transversal cracking

In this work crack formation and development is addressed and implemented in a planar layered reinforced-concrete beam element. The crack initiation and growth is described using the strength criterion in conjunction with exact kinematics of the interlayer connection. In this way a novel embedded-discontinuity beam finite element is derived in which the tensile stresses in concrete at the crack position reaching the tensile strength will trigger a crack to open. Since the element is multi-layered, in this way the crack is allowed to propagate through the depth of the beam. The cracked layer(s) will involve discontinuity in the cross-sectional rotation equal to the crack-profile angle, as well as a discontinuity in the position vector of the layer’s reference line. A bond–slip relationship is superimposed onto this model in a kinematically consistent manner with reinforcement being treated as an additional layer of zero thickness with its own material parameters and a constitutive law implemented in the multi-layered beam element.     

Application of the transmission line matrix method for outdoor sound propagation modelling – Part 1: Model presentation and evaluation

The present paper deals with an original time-domain approach applied to outdoor sound propagation under meteorological effects. The transmission line matrix method, based on the Huygens’ principle, had already been validated over impedant grounds and complex topography. The presented formulation proposes to take into account meteorological effects (wind speed and temperature) through the relative sound speed. The necessary wavefront direction is determined through the calculation of the averaged intensity vector direction. A good agreement is found between simulations of both the transmission line matrix and parabolic equation methods. A relevant use of the method is shown in the framework of environmental acoustics and initial applications are proposed in Part 2.     

Disjoining pressure and the film-height-dependent surface tension of thin liquid films: New insight from capillary wave fluctuations

In this paper we review simulation and experimental studies of thermal capillary wave fluctuations as an ideal means for probing the underlying disjoining pressure and surface tensions, and more generally, fine details of the Interfacial Hamiltonian Model. We discuss recent simulation results that reveal a film-height-dependent surface tension not accounted for in the classical Interfacial Hamiltonian Model. We show how this observation may be explained bottom-up from sound principles of statistical thermodynamics and discuss some of its implications.     

考虑重力因素的断溶体储层“井-洞-缝”模型试井解释方法

顺北油田属于大型断裂构造运动形成的断溶体储层，纵向裂缝系统和垂向分布的溶洞是主要的储集体空间.本文提出溶洞中的压力变化是由流动和波动共同产生的，依此把能量守恒方程与试井理论相结合，建立考虑重力因素的断溶体储层试井解释方法.定义无量纲量，并对无量纲方程进行Laplace变换，得到Laplace空间上的井底压力.由Stehfest数值反演算法得到试井分析所需的图版曲线.对重力因素进行敏感性分析表明：重力因素只影响双对数曲线的末期，当重力因素很明显时，曲线特征类似于定压边界.对新疆油田的某井进行分析，解释了曲线后期下掉原因，并给出溶洞体积以及波动相关参数等，分析结果与生产实际情况相吻合.     

Modeling the Effect of Injection Molding Process Parameters on Warpage Using Neural Network Theory

A back propagation artificial neural network (BPANN) prediction model for warpage of injection-molded polypropylene was developed based on an orthogonal design method. The BPANN model was trained by the input and output data obtained from the moldflow software platform simulations. It is proved that the BPANN model can predict the warpage with reasonable accuracy. Utilizing the BPANN model, the effects of the process parameters, packing pressure (Pp), melt temperature (T_me), mold temperature (T_mo), packing time (t_p), cooling time (t_c), and fill pressure (p_f), on the warpage were investigated. The most important process parameter affecting the warpage was Pp, and the second most important was T_me. The rest of the process parameters, T_mo, t_p, t_c, and p_f, were found to be relatively less influential. Warpage increased with elevating T_mo. In contrast, an increase in Pp and T_me caused the warpage to decrease.     

Poroelastic toughening in polymer gels: A theoretical and numerical study

We explore the Mode I fracture toughness of a polymer gel containing a semi-infinite, growing crack. First, an expression is derived for the energy release rate within the linearized, small-strain setting. This expression reveals a crack tip velocity-independent toughening that stems from the poroelastic nature of polymer gels. Then, we establish a poroelastic cohesive zone model that allows us to describe the micromechanics of fracture in gels by identifying the role of solvent pressure in promoting poroelastic toughening. We evaluate the enhancement in the effective fracture toughness through asymptotic analysis. We confirm our theoretical findings by means of numerical simulations concerning the case of a steadily propagating crack. In broad terms, our results explain the role of poroelasticity and of the processes occurring in the fracturing region in promoting toughening of polymer gels.     

Operation principle of self-phase compensated optical waveguide isolator

A theory is developed for the self-phase compensated optical waveguide isolator recently reported in the literature. The operation principle of such device is explained in terms of synchronization of phase and power conversion. The effect of balancing phase mismatches of the two convertors on achieving a proper percentage of mode conversion is revealed. The way to make use of the phase mismatches of different sections to accommodate the different requirements in phase relationship for the reciprocal and nonreciprocal mode convertors is discussed. The theory is extended to the case where phase compensator is used. It is demonstrated that the introduction of phase compensator separates the adjustment of phase from the adjustment of power for the mode convertors so that relaxes fabrication tolerances of such devices. An isolator consists of three phase mismatched waveguide sections is designed and simulated. The simulation results confirm the self-phase compensation theory.