Probing in vitro digestion at oil–water interfaces

Interfacial layers have been widely applied to study the formation and stability of emulsion-based systems. However, the application of isolated interfaces to address digestibility of emulsions is often limited because of the complexity of experimental methods and results. This review summarizes the latest developments in analytical methods and literature data on effects of digestion on interfacial layers. Particular emphasis is given to understand the changes on interfacial magnitudes during oral, gastric, and duodenal digestion, either applied separately or sequentially. Limitations of interfacial aspects and key factors that influence emulsion microstructure in bulk and lipid digestion are identified. Understanding the behavior of interfacial layers upon gastrointestinal digestion promotes an accurate tracking of the physiological fate of emulsions.     

First‐principles study of metal/nitride polar interfaces: Ti/TiN

We have examined the optimal interface structure, ideal work of adhesion and bonding character of polar Ti(110)/TiN(111) interfaces by first‐principles density‐functional plane‐wave pseudopotential calculations. Both Ti‐ and N‐terminated interfaces, including six different interface structures, were calculated. The interface structure for each termination, continuing the TiN crystal structure across the interface, has the largest work of adhesion. Although both terminations yield substantial adhesion energies in the range 3–7 J m^?2, the N‐terminated interface is ～4 J m^?2 stronger than the Ti‐terminated interface. Analysis of the interfacial electronic structure shows that the Ti‐terminated interface is a mixed strong, metallic and weak covalent character, whereas the N‐terminated interface is a polar covalent bond similar to the Ti/TiC interface. Further study of the separation of the optimal interface shows that the cleavages will never fracture at the interface due to the strong bonding, which is consistent with the experimental results. Copyright © 2003 John Wiley & Sons, Ltd.     

Coil-to-globule transitions of interfacial copolymers in better than theta-solvents

Experimental studies of the coil-to-globule transitions exhibited in better than -solvents by interfacial copolymers ofN-isopropylacrylamide and acrylamide imply that a lower bound for the value of n in then-clusters of poly(N-isopropylacrylamide) (PNIPAM) is 3. The corresponding upper bound is therefore likely to be 5 or 6. Statistical copolymers of PNIPAM containing upwards of 0.75 mole fraction of acrylamide (whose homopolymer does not itself displayn-clustering) exhibited this transition, which disappeared at higher mole fractions of acrylamide. Interfacial homopolymers ofN-ethylacrylamide and its statistical copolymers withN-isopropylacrylamide exhibitedn-clustering at all compositions.     

Polylactide hollow spheres fabricated by interfacial polymerization in an oil-in-water emulsion system

A one-step pathway has been adopted to fabricate biodegradable polylactide (PLA) hollow spheres by interfacial polymerization in an oil-in-water emulsion system. The mechanism of sphere formation is suggested with respect to interfacial cross-linking polymerization and subsequent precipitation of the unreacted PLA macromonomers onto the preformed shells. Their hollow nature and morphology were verified by transmission electron microscopy and scanning electron microscope characterizations.     

低温低内应力化学镀镍工艺的研究

化学镀广泛应用于非金属的电镀、电铸前的施加导电层。化学镀沉积层质量与其在零件上的附着力有着密切的关系 ,重视对化学镀沉积层内应力的研究 ,开发一个低温、低内应力的化学镀镍工艺 ,对于化学镀沉积层的推广应用有着十分重要的意义。本文采用正交实验方法对低温、低内应力化学镀镍工艺进行了系统研究 ,开发出了一个低温、低内应力的化学镀镍工艺。在实验过程中发现沉积层内应力同其在零件上的结合力具有密切关系并对其进行了初步探讨。1　实验方法1 1　正交实验根据探索性实验结果分析 ,影响化学镀镍层内应力σ和沉积层速率ｒ的主要因…     

有机锡聚醚的合成及性质的研究

利用界面缩聚技术,将二烷基二氯化锡、二(β-烷氧羰乙基)二氯化锡与有机二元醇、酚、硫醇反应,制成了一系列新的有机锡大分子化合物.对这些新化合物进行了分子量、红外光谱、TG/DTG测试.对有机锡大分子化合物阻止聚氯乙烯(PVC)热分解性能进行了测定.结果表明,新合成的有机锡聚醚化合物可作为PVC热稳定剂使用.     

Deformation behavior of thin,compliant layers under tensile loading conditions

In this article, a connection is made between the behavior of thin layers of Newtonian liquids under tensile loading conditions and the behavior of highly deformable elastic or viscoelastic solids, which are more commonly used as adhesives. The behavior of Newtonian liquids is understood in the most quantitative detail and serves as a starting point for understanding the origins of fingering and cavitation instabilities that appear when the tensile deformation rates applied to these layers are sufficiently large. Similar instabilities appear in solid systems and can be attributed to common features of the stress distribution for incompressible liquids and solids. A unifying treatment is presented that can be used to understand the overall deformation behavior and adhesive performance of a wide variety of solid and liquid systems that are typically applied as thin layers. © 2004 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 42: 4023–4043, 2004     

A preliminary study on the initial elastic adhesion behavior of leucocytes

By treating the cell body as an elastic colloid and applied with the Hertz contact theory of linear elasticity and the lubrication equation of fluid dynamics, the elastic adhesion behavior of leucocytes in close motion toward a plane surface is investigated. The effect of the Stokes number on the deformation profile of the cell is considered during the adhesion period. From the results of numerical simulation, it is found that under certain conditions (i.e. regardless of the magnitude of F for the cases of ST=1 and 3 and ε0.0055 for ST=10), after exhausting all of the incoming kinetic energy, the cell can rest at an equilibrium separation which is close to the ligand–receptor bond length formed between two interacting surfaces.     

聚碳酸酯合成工艺开发的新进展

本文从工艺开发的角度，简要评介了目前聚碳酸酯两大工业生产工艺，即光气化界面缩聚工艺和熔融酯交换缩聚工艺的研究开发新动向。     

Application of the JKR Method to the Measurement of Adhesion to Langmuir-Blodgett Cellulose Surfaces

The JKR method has been applied for studying adhesion between poly(dimethylsiloxane) (PDMS) caps and Langmuir–Blodgett cellulose surfaces including the substrate, hydrophobized mica, and two flat mineral surfaces, bare mica and glass. The self-adhesion of PDMS caps and oxidized PDMS caps are included as a reference to compare with literature data. The results of the measurements have been compared with previous studies using the surface force apparatus and similar systems. A satisfactory agreement is obtained for simple systems showing no, or very limited, hysteresis between loading and unloading curves. In several cases, however, a large hysteresis is found between loading and unloading curves, with a larger adhesion measured from the pull-off force than from the JKR-curve determined on loading. This is, for instance, the case for PDMS against cellulose. The situation is analogous to that found in wetting studies showing a large hysteresis between advancing and receding contact angles.