Synthesis of silk-like FeS2/NiS2 hybrid nanocrystals with improved reversible oxygen catalytic performance in a Zn-air battery

The development of highly active and stable reversible oxygen electrocatalysts is crucial for improving the efficiency of metal-air battery devices. Herein, an efficient liquid exfoliation strategy was designed for producing silk-like FeS₂/NiS₂ hybrid nanocrystals with enhanced reversible oxygen catalytic performance that displayed excellent properties for Zn-air batteries. Because of the unique silk-like morphology and interface nanocrystal structure, they can catalyze the oxygen evolution reaction (OER) efficiently with a low overpotential of 233 mV at j = 10 mA cm^?2. This is an improvement from the recently reported catalysts in 1.0 M KOH. Meanwhile, the oxygen reduction reaction (ORR) activity of the silk-like FeS₂/NiS₂ hybrid nanocrystals showed an onset potential of 911 mV and a half-wave potential of 640 mV. In addition, the reversible oxygen electrode activity of the silk-like FeS₂/NiS₂ hybrid nanocrystals was calculated to be 0.823 V, based on the potential of the OER and ORR. Further, the homemade rechargeable Zn-air batteries using FeS₂/NiS₂ hybrid nanocrystals as the air-cathode displayed a high open-circuit voltage of 1.25 V for more than 17 h and an excellent rechargeable performance for 25 h. The solid Zn-air batteries exhibited an excellent rechargeable performance for 15 h. This study provided a new method for designing interface nanocrystals with a unique morphology for efficient multifunctional electrocatalysts in electrochemical reactions and renewable energy devices.     

强冲击加载条件下的钨合金的界面研究

借助定量金相、扫描电子显微镜、透射电子显微镜等微观分析手段对钨质量分数为９３％的钨合金在１５～５０ＧＰａ冲击压力下微观结构响应性态进行了考察，发现了一些钨合金所特有的现象，即钨颗粒与粘结相交界处出现成分迁移，新相析出；并结合断口分析，探讨了钨合金在冲击作用下发生断裂的微观特征与韧脆转化间的关系及其物理本质。     

锑化镓的光助微刻蚀及其表面氧化物的研究

用电化学和光电化学方法研究锑化镓表面的腐蚀以及锑化镓表面氧化膜的生成和溶解，锑化镓电极在一定电势下生成的氧化膜，用俄歇能谱证明，其主要成分为难溶的氧化锑，此氧化膜的存在抑制了锑化镓的进一步腐蚀，同时亦使锑化镓的半导体光电化学性能大为减弱，通过激光微刻蚀及电子显微镜的观察，在刻蚀剂中添加酒石酸，柠檬酸和氢氟酸等试剂，可使刻蚀形得改善，实验研究了锑化镓的平带电势的测定。     

带甲基侧基的环氧树脂增容剂对炭黑在丁苯橡胶中分散度的影响

用自制的带甲基侧基的环氧树脂(TMBP)作为界面增容剂, 从拉伸性能、键合胶含量、动态性能、扫描电镜和流变性能等方面, 研究了TMBP对炭黑在丁苯橡胶中分散度的影响, 并与市售通用双酚A型环氧树脂(E-51)和橡胶工业常用软化剂邻苯二甲酸二辛酯(DOP)进行了比较. 结果表明, 带甲基侧基的环氧树脂TMBP在提高炭黑分散性方面的效果远比E-51好， 其作用模式具有典型的增容特性.     

蛋白质-蛋白质相互作用界面统计分析

以作者开发的从蛋白质结合部位推导出其界面所具有的疏水性质和氢键性质的计算程序PP_SITE为基础,利用蛋白质结构数据库(PDB),对蛋白质-蛋白质相互作用界面进行了统计分析.从PDB中挑出非冗余的链间相互作用对,计算出这个数据集中所有链间界面的疏水和氢键相互作用特征.对得到的界面特征进行统计分析,寻找能够明显聚类的界面特征.结果表明，界面大小、氢键和疏水相互作用在界面所占比例以及疏水相互作用的集中程度可以作为分类的依据.     

Electro-catazone treatment of an ozone-resistant drug: Effect of sintering temperature on TiO2 nanoflower catalyst on porous Ti gas diffuser anodes

Electrochemical heterogeneous catalytic ozonation (E-catazone) is a promising and advanced oxidation technology that uses a titanium dioxide nanoflower (TiO_2-NF)-coated porous Ti gas diffuser as an anode material. Our previous study has highlighted that the importance of the TiO_2-NF coating layer in enhancing OH production and rapidly degrading O₃-resistant drugs. It is well known that the properties of TiO_2-NF are closely related to its sintering temperature. However, to date, related research has not been conducted in E-catazone systems. Thus, this study evaluated the effect of the sintering temperature on the degradation of the O₃-resistant drug para-chlorobenzoic acid (p-CBA) using both experimental and kinetic modeling and revealed its influence mechanism. The results indicated that the TiO_2-NF sintering temperature could influence p-CBA degradation and OH production. TiO_2-NF prepared at 450 °C showcased the highest p-CBA removal efficiency (98.5% in 5 min) at a rate of 0.82 min⁻¹, and an OH exposure of 8.41 × 10⁻¹⁰ mol L⁻¹ s. Kinetic modeling results and interface characterization data revealed that the sintering temperature could alter the TiO₂ crystallized phase and the content of surface-adsorbed oxygen, thus affecting the two key limiting reactions in the E-catazone process. That is, ≡TiO₂ surface reacted with H₂O to form TiO₂-(OH)₂, which then heterogeneously catalyzed O₃ to form OH. Consequently, E-catazone with a TiO_2-NF anode prepared at 450 °C generated the highest surface reaction rate (5.00 × 10⁻¹ s⁻¹ and 4.00 × 10^-3 L mol^-1 s⁻¹, respectively), owing to its higher anatase content and adsorbed oxygen. Thus, a rapid O₃-TiO₂ reaction was achieved, resulting in an enhanced OH formation and a highly effective p-CBA degradation. Overall, this study provides novel baseline data to improve the application of E-catazone technology.     

A new approach to the design of surface treatments for reinforcing agents

A new approach for design of improved interfacial bonding between carbon fibers and polymeric matrices is described. In this method the affinity of surface-treated carbon fibers to various polymer matrices is simulated by analyzing the adsorption characteristics of model compounds, typical of the polymer units, onto very high surface area carbon fibers. The affinity can be evaluated by the use of Thermogravimetric Analysis (TGA) to measure adsorption–desorption characteristics. Since high surface area, activated carbon fibers (ACF) can be chemically treated to obtain acidic, basic, nonpolar or highly polar surfaces, it should be possible to assess the interactions of chemically modified surfaces with model compounds such as methanol (MeOH), acetone, dimethylformamide (DMF), dimethylether, tetrahydrofuran (THF) and water. Some preliminary results are presented, indicating that surface treatments for carbon fibers other than oxidation may lead to enhanced bonding with polymeric matrices.     

热导式热量计特征热谱方程的建立

Based on the interfacial model of a conduction calorimeter, a characteristic thermogram equation is suggested in this paper. Measurements of only two quantities such as the maximum peak height △m and its time tm, enables us to calculate the peak height at any interval by using this model. Thermograms of alkaline hydrolysis of ethyl propionate and ethyl acetate have been measured at 25℃, respectively. The themographic data calculated by using the characteristic thermogram equation are in reasonable agreement with those read from the thermograms.     

All-glass open-split interface for capillary GC/MS

This paper describes a design for an all-glass GC/MS interface. The design has advantages due to low dead volume, lack of column effluent adsorption and degradation, simple interface production and installation, and ease of column mounting/dismounting.