带孔洞的金属拉伸的分子动力学

在不同负静压下对中心带有一个球形孔洞的面心立方金属铜进行分子动力学模拟,从晶体的形变,原子分布示意图,径向分布函数等方面进行讨论.发现在弱的负压下,孔洞及材料作弹性变形,超过一定阈值时出现塑性变形,并在局部出现相变.在极强的负压下,材料断裂.随拉伸应力的增加,材料经历弹性均匀拉伸——局部fcc到hcp的相变及缺陷的产生——缺陷积累产生微裂纹或空洞——材料断裂的过程.     

通过幺正操作传送未知两个三能级粒子纠缠态

我们提出一个把未知的两个三能级粒子纠缠态传送给两个接收者的方案,该方案使用一个未知的五个三能级粒子纠缠态作为量子通道。必须指出该方案能够推广到传送未知的N个三能级粒子纠缠态给M个接收者的情况,使用的是未知(N.M 1)个三能级粒子纠缠态作为量子通道。在传送过程中,需要执行适当的幺正操作和(N.M 1)次独立测量,而且该方案不涉及Bell态测量。     

应力对La0.83Sr0.17MnO3薄膜输运性能的影响

采用溶胶-凝胶方法在Si(111)上制备了LSMO(x=0.17)薄膜.研究了块体材料和不同厚度薄膜R -T曲线、红外光谱和X射线衍射.结果表明，LSMO薄膜属于正交晶体结构，薄膜取向与膜厚度 有关，当膜厚度为450nm或680nm时，主要取向〈200〉，而膜厚度为900nm时取向为〈020〉 ：根据离子对相互作用能和谐振子模型，得到了红外吸收与Mn—O—Mn键长和键角关系式，6 00cm^-1附近红外吸收与晶格常数b的变化有关；块体与薄膜的金属—绝缘体转变 温度(T_MI)存在较大差别，薄膜转变温度显著低于块体，并与厚度有一定关系. 认为是LSMO薄膜中的应力诱导了晶格常数变化，引起键角改变及JT效应是转变温度变化的主 要原因. 关键词： 单晶硅 晶格常数 金属—绝缘体转变温度 应力诱导     

第一类永动机幻梦的破灭

介绍了13~18世纪物理学史和科技史上曾名噪一时的第一类永动机的设计方案的破灭.第一类永动机幻梦破灭的历史引起了人们的反思与启示,有力地促进了19世纪中叶能量转化和守恒定律的确立.     

在相干理论的基础上分析光栅成像

本文在相干理论的基础上,推导了光栅成像中的光强分布和物像位置关系,并给出一组具有不同参数的实验照片及一组借助计算机绘制的强度分布图。     

光学系统的等效变换

本文在普遍情况下使用矩阵方法详细讨论了光学系统的等效变换,证明光线变换矩阵为的光学系统当C≠0时可等效为一个薄透镜,当C=0时等效为一个薄透镜组。文中所得结果能用于分析光线或光束通过复杂光学系统的变换和多元件光腔的问题。     

无源空心波导谐振腔横模模式的竞争与转换

本文提出并采用非对角化的分析法研究无源空心波导谐振腔横模模式间的竞争与转换。从计算EH_(1m)类波导本征模在腔内的转换矩阵中发现:在模式的传输过程中,存在着横模模式间的相互转换,而且其互换的能量不相等。在一定的腔设计条件下,会出现高阶横模向低阶横模的能量净流动,这有利于谐振腔横模模式的选择和基模输出功率的提高。     

A discrete KdV equation hierarchy: continuous limit,diverse exact solutions and their asymptotic state analysis

In this paper, a discrete KdV equation that is related to the famous continuous KdV equation is studied. First, an integrable discrete KdV hierarchy is constructed, from which several new discrete KdV equations are obtained. Second, we correspond the first several discrete equations of this hierarchy to the continuous KdV equation through the continuous limit. Third, the generalized (m, 2N − m)-fold Darboux transformation of the discrete KdV equation is established based on its known Lax pair. Finally, the diverse exact solutions including soliton solutions, rational solutions and mixed solutions on non-zero seed background are obtained by applying the resulting Darboux transformation, and their asymptotic states and physical properties such as amplitude, velocity, phase and energy are analyzed. At the same time, some soliton solutions are numerically simulated to show their dynamic behaviors. The properties and results obtained in this paper may be helpful to understand some physical phenomena described by KdV equations.     

Ultrasound regulated flexible protein materials: Fabrication,structure and physical-biological properties

Ultrasound can be used in the biomaterial field due to its high efficiency, easy operation, no chemical treatment, repeatability and high level of control. In this work, we demonstrated that ultrasound is able to quickly regulate protein structure at the solution assembly stage to obtain the designed properties of protein-based materials. Silk fibroin proteins dissolved in a formic acid-CaCl₂ solution system were treated in an ultrasound with varying times and powers. By altering these variables, the silks physical properties and structures can be fine-tuned and the results were investigated with Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), scanning electron microscopy (SEM), differential scanning calorimetry (DSC), thermogravimetric analysis (TGA), dynamic mechanical analysis (DMA), gas permeability and water contact angle measurements. Ultrasonic treatment aids the interactions between the calcium ions and silk molecular chains which leads to increased amounts of intermolecular β-sheets and α-helix. This unique structural change caused the silk film to be highly insoluble in water while also inducing a hydrophilic swelling property. The ultrasound-regulated silk materials also showed higher thermal stability, better biocompatibility and breathability, and favorable mechanical strength and flexibility. It was also possible to tune the enzymatic degradation rate and biological response (cell growth and proliferation) of protein materials by changing ultrasound parameters. This study provides a unique physical and non-contact material processing method for the wide applications of protein-based biomaterials.     

The Role of Information in Managing Interactions from a Multifractal Perspective

In the framework of the multifractal hydrodynamic model, the correlations informational entropy–cross-entropy manages attractive and repulsive interactions through a multifractal specific potential. The classical dynamics associated with them imply Hubble-type effects, Galilei-type effects, and dependences of interaction constants with multifractal degrees at various scale resolutions, while the insertion of the relativistic amendments in the same dynamics imply multifractal transformations of a generalized Lorentz-type, multifractal metrics invariant to these transformations, and an estimation of the dimension of the multifractal Universe. In such a context, some correspondences with standard cosmologies are analyzed. Since the same types of interactions can also be obtained as harmonics mapping between the usual space and the hyperbolic plane, two measures with uniform and non-uniform temporal flows become functional, temporal measures analogous with Milne’s temporal measures in a more general manner. This work furthers the analysis published recently by our group in “Towards Interactions through Information in a Multifractal Paradigm”.