滑带土动力学性质试验研究

为了研究地震高烈度区老滑坡的复活变形原因,本文对滑坡滑带土的动力学特性进行了系列研究。本次试验采用扰动土样,制样基本物理指标按滑带土的现场测试指标确定,在不固结不排水条件下,运用MTS810Teststar程控液压伺服土动三轴仪对单个样品逐级放大动应力的分级试验方法进行。侧向压力 (围压 )分别采用 100kPa、20 0kPa、300kPa三级,通过施加轴向振动荷载 (力 )模拟地震作用,振动波形为正弦波,频率为 1Hz,振幅随试样性质确定。研究结果表明,滑带土在动荷载作用下的动力学性质与其静荷载作用下的力学性质有着较大的差异,主要表现在滑带土的动应力与动应变关系的非线性、滞后性及变形积累特点,动弹性模量与动强度的显著降低以及动阻尼比的显著增大特性。这揭示了动力作用下的滑坡复活原因之一,同时为滑坡稳定性评价和动力作用下的变形机制模拟分析提供了基础资料,也为分析滑带土动力本构模型提供了基本内容。     

NONLINEAR UNIFIED STRENGTH MODEL OF GEOMATERIALS

将材料的破坏归结为剪切破坏,每种材料对应于特定的剪切滑动面,抗剪强度为滑动面上正应力的函数,基于不同材料的强度特性将一系列的剪切滑动面统一起来,建立了岩土材料的非线性统一强度模型.非线性统一强度模型的滑动面为β应力空间内的等倾面,在β应力空间内的强度面为圆锥面;在普通应力空间内的强度面为一系列连续光滑、外凸的锥面,在偏平面上强度曲线涵盖了从下限Matsuoka-Nakai曲线到上限Drucker-Prager圆之间的所有区域,子午面上强度线为直线.非线性统一强度模型只有3个材料参数,参数都具有明确的物理意义,通过与国内外学者已取得的岩土类材料真三轴强度试验结果的比较,表明模型可适用于多种类型的材料,并合理描述其非线性强度特性.     

建立P-S-N曲线的双加权最小二乘法

为充分利用成组疲劳试验数据和疲劳强度试验数据,获得较高精度的P-S-N曲线,提出了一种建立P-S-N曲线的双加权最小二乘法。该方法充分考虑了疲劳试验方法、疲劳试验数据分散性和试件样本容量对P-S-N曲线建立的影响,构建了不同来源误差的分配模型。它首先利用疲劳试验的最小样本容量判据处理成组试验数据,导出试验数据分布p分位点的置信区间长度,并进行第一次加权拟合。再结合疲劳强度试验数据,进行第二次加权拟合,推导出了任意可靠度下的P-S-N曲线。作者对17组金属材料和PMMA(聚甲基丙烯酸甲酯)材料进行了统计分析以验证所建立的P-S-N曲线的拟合能力、合理性和预测精度,结果表明建立的P-S-N曲线具有较高的精度和可信度。     

Investigation of crystallographic sites of Eu in La2BaZnO5 by site-selective laser-excitation spectroscopy

La₂BaZnO₅:Eu³⁺ (0.05 mol%) was prepared by a solid-state reaction at high temperature. X-ray powder diffraction analysis confirmed the formation of single phase La₂BaZnO₅. Luminescence properties of La₂BaZnO₅:Eu³⁺ are investigated by site-selective laser-excitation and emission spectroscopy at 18 K. Two different crystallographic sites for Eu³⁺ corresponding to the La³⁺ and Ba²⁺ sites are identified from the ⁷F₀→⁵D₀ excitation spectra obtained by monitoring the ⁵D₀→⁷F_J (J=1, 2, …, 6) emissions. It is found that Eu³⁺ substituted for the Ba²⁺ ion experiences stronger crystal-field strength than Eu³⁺ substituted for the La³⁺ ion. Energy transfer between the two crystallographic Eu³⁺ centers is investigated by luminescence decay curves at 18 K.     

超高强块体非晶合金的研究进展

研制具有极限力学性能的金属材料一直是材料研究人员的梦想.超高强块体非晶合金是一类具有极高断裂强度(4 GPa)、高热稳定性(玻璃化转变温度通常高于800 K)和高硬度(通常高于12 GPa)的新型先进金属材料,其代表合金材料Co-Ta-B的断裂强度可达6 GPa,为目前公开报道的块体金属材料的强度记录值.本文系统地综述了该类超高强度块体非晶合金的组分、热学性能、弹性模量及力学性能,阐述了该类材料的研发历程;以弹性模量为联系桥梁,阐明了该类超高强块体非晶合金材料各物理性能的关联性,并揭示了其高强度、高硬度的价键本质.相关内容对于材料工作者了解该类超高强度金属材料的性能和特点,并推进该类材料在航空航天先进制造、超持久部件、机械加工等领域的实际应用有着重要意义.     

流动注射化学发光法测定山奈酚

采用流动注射技术,研究了高锰酸钾-山奈酚-过氧化氢体系的化学发光行为,对影响化学发光强度的因素进行了试验,建立了流动注射化学发光法测定山奈酚的新方法.方法检出限为1×10-10g·mL-1,线性范围为1.0×10-7-1.0×10-4g·mL-1.对1.0×10-6g·mL-1的山奈酚平行测定11次,其RSD为2.1%...     

Modification of bonding properties and microstructure of resin-cement interface by coupling agents

To solve the problem of organic-inorganic light conductive composite interface features, transparent resin and cement matrix were used as carriers to further study features of the organic-inorganic interface formed by transparent resin and cement matrix and the interface modification of the coupling agent. The bond strength, micro-hardness, microstructure and surface morphology of a resin light conductive cementitious materials (RLCCM) interface were evaluated by tests of tensile and oblique shear, micro-hardness, environmental scanning electron microscopy, and atomic force microscope. The results show that the silane A-151 and aluminate coupling agent could significantly improve interface bond properties of RLCCM. At 7 d, the interface tensile bond strength of the silane A-151 and aluminate coupling agent increased by 117 and 105%, respectively. At 28 d, strength on average increased by 73%. At 7 d, interface shear strength the silane A-151 and aluminate coupling agent of 45° increased by 43 and 53%, respectively, At 28 d, strength on average increased by 40%. The transparent resin performance weakened region thickness up to 100 μm; the hardness of the transparent resin in the transition region was increased by 19.6 and 39.9%, respectively. Silane coupling agent A-151 and cement hydration products formed flat spherical particles with diameter of approximately 78 nm, and these particles mosaicked and fused in the surface of the hydrate; therefore, the surface became denser and smoother.     

囚禁弱相互作用玻色气体的势场优化准则

根据Thomas-Fermi近似,在基于最小动量态上玻色-爱因斯坦凝聚的前提下,研究了囚禁弱相互作用玻色气体势场的最优化问题.导出了指数吸引势阱中有效势场和粒子数极限判据,粒子数给定时,可由此判据求出所需势场强度;势场强度给定时,可由此判据求出粒子数极限.根据吸引相互作用系统的稳定性以及求出的排斥相互作用的最大粒子数极限,结合有效势场判据,分别给出了囚禁吸引和排斥相互作用玻色气体时,势场强度的最佳取值范围. 关键词： 玻色-爱因斯坦凝聚 弱相互作用 粒子数极限 势场强度     

ICF靶用空心玻璃微球耐压性能测试

 利用自行研制的空心微球耐外压装置和充气装置，测试了目前激光惯性约束聚变实验打靶使用的空心玻璃微球耐内压能力和耐外压能力。空心玻璃微球采用液滴法制备，直径为180～250 mm、壁厚为0.8~4.0 mm。理论计算表明，当微球纵横比超过90时，耐外压能力与球壳材料的杨氏模量有关，由此测量得到的空心玻璃微球杨氏模量为55~75 GPa。玻璃微球的耐内压能力主要与球壳材料的抗拉强度有关，实验测量得到的玻璃微球抗拉强度为90~140 MPa。     

Stability of Optically Injected Two‐State Quantum‐Dot Lasers

Simultaneous two‐state lasing is a unique property of semiconductor quantum‐dot (QD) lasers. This not only changes steady‐state characteristics of the laser device but also its dynamic response to perturbations. In this paper we investigate the dynamic stability of QD lasers in an external optical injection setup. Compared to conventional single‐state laser devices, we find a strong suppression of dynamical instabilities in two‐state lasers. Furthermore, depending on the frequency and intensity of the injected light, pronounced areas of bistability between both lasing frequencies appear, which can be employed for fast optical switching in all‐optical photonic computing applications. These results emphasize the suitability of QD semiconductor lasers in future integrated optoelectronic systems where a high level of stability is required.