Solventless injecction for packed column supercritical fluid chromatography

The adverse effects of injection solvent strength on microbore packed column SFC band broadening are demonstrated and a solventless injection system that eliminates these effects is introduced. The injection system removes solvent in a GC-like manner using a retention gap and an on-column capillary GC syringe. The analyte is delivered to the analytical column in a solvent-free plug of supercritical fluid mobile phase.     

流动注射—在线分离富集与原子光谱检测联用技术

现代分析化学发展的重要特征之一是分析方法从离线/手动操作向在线/自动操作方向转化。流动注射(FI)作为非均匀和非平衡状态下的溶液处理和微量进样技术,是实现上述转化的有力工具。FI可与不同的分离富集和检测手段结合,具有很强适应性和实用性。在众多联用技术中,FI—在线分离富集与原子光谱检测联用技术特别受到分析化学界的青睐。这种联用不仅可以克服常规离线操作费时、污染环境和试样/试剂消耗大的缺点,而且可大大提高分析效率,显著改善分析方法的灵敏度与选择性,进行多种成分同时检测(对ICP—AES,DCP—AES     

Production of high melt strength polypropylene by gamma irradiation

High melt strength polypropylene (HMS-PP) has been recently developed and introduced in the market by the major international producers of polypropylene. Therefore, BRASKEM, the leading Brazilian PP producer, together with EMBRARAD, the leading Brazilian gamma irradiator, and the IPEN (Institute of Nuclear Energy and Research) worked to develop a national technology for the production of HMS-PP. One of the effective approaches to improve melt strength and extensibility is to add chain branches onto polypropylene backbone using gamma radiation. Branching and grafting result from the radical combinations during irradiation process. Crosslinking and main chain scission in the polymer structure are also obtained during this process. In this work, gamma irradiation technique was used to induce chemical changes in commercial polypropylene with two different monomers, Tri-allyl-isocyanurate (TAIC) and Tri-methylolpropane-trimethacrylate (TMPTMA), with concentration ranging from 1.5 to 5.0 mmol/100 g of polypropylene. These samples were irradiated with a ⁶⁰Co source at dose of 20 kGy. It used two different methods of HMS-PP processing. The crosslinking of modified polymers was studied by measuring gel content melt flow rate and rheological properties like melt strength and drawability. It was observed that the reaction method and the monomer type have influenced the properties. However, the concentration variation of monomer has no effect.     

The relative importance of temperature and isotope effects on the dipole oscillator strength distribution of H2

Summary The calculation of the effects of temperature and isotopic composition on the energy weighted moments of the dipole oscillator strength distribution of H₂ in the random phase approximation to the polarization propagator are reported. It is seen that the effect of isotopic composition is small, while that of temperature is of an order accessible to experiment. We find that all the mean excitation energiesI , for =–1, 0, 1, decrease with temperature as does the dipole oscillator strength momentS() for >0, while the opposite is true for <0. These effects are interpreted in terms of the bond length dependence of the excitation energies.     

Properties study of anhydrite(II) prepared from waste gypsums

Anhydrites(II)- CaSO₄ were prepared from two waste gypsums (PRECHEZA Perov, FOSFA Potorná). The samples of anhydrites(II) with sulphate activators were tested on spillage, beginning and the end of setting time, bending and pressure strength. Both sodium and potassium sulphates accelerated setting of anhydrite, more impressively that prepared from Potorná gypsum. The addition of Na₂SO₄ influenced the strength of this anhydrite very favourably. On the contrary K₂SO₄ influenced favourably the strength of Perov anhydrite. Results confirm the necessity to evaluate properties of such materials with respect to their origin.     

ESR investigation on the phase transitions of DPPC vesicles in presence of high concentrations of Li+, Na+, K+ and Cs+

The partition of the spin label TEMPO in the hydrophobic region of di-palmitoyl-phosphatidylcholine unilamellar vesicles has been used to investigate the influence of high concentration (up 3M) of Li⁺, Na⁺, K⁺, and Cs⁺ on the phase transitions at 20–60°C. All of the above salts increase the permeation of TEMPO. The efficiency of monovalent cations in inducing the partition of the spin label in the hydrophobic environment of the bilayer increases in the order: Cs⁺+++. The disappearing of the pretransition and the downward shift of the main phase transition temperature from 37°C to 33.5°C is related to the increased permeation of TEMPO into the bilayer. The presence of salts in the bulk solution disturbs the hydration of the zwitterionic polar head of the DPPC molecules and changes the electrical interaction between the polar groups of the bilayer. This reduces the packing density of the lipid molecules and promotes the permeation of TEMPO.     

自增强高性能聚合物的成型工艺同力学性能间相关性研究——1.超高分子量聚乙烯的应力诱导结晶理论和其自增强作用

本文发展了一种高分子量聚合物熔融体的应力诱导结晶结构形态模型,它是由微晶聚集体(以下简称微区)-高分子链组网和缠结网的网络结构组成。基于上述模型,把二种网中的单个链组作为独立的统计单元和形变单元,计算了二种网中单个链组的末端距分布函数,进一步计算了二种网和总网的形变自由能。在此基础上,讨论了诱导结晶结晶机理和自增强聚合物网络自由能的依赖性,并着重地研究了超拉伸高聚物的起始熔点拉伸比间的关系。用超高分子量聚乙烯膜和超取向高密度聚乙烯纤维的起始熔点和拉伸比的实验数据进行处理,得到理论予期的近似直线关系,初步验证了聚合物网应力诱导结晶理论。     

簇离子Mo_3S_4M~（n＋）中M与Mo成键作用及电子光谱（M＝Fe、Ni，n＝4；M＝Cu，n＝5）

应用ＩＮＤＯ／Ｓ半经验量子化学方法，对簇合物离子Ｍｏ３Ｓ和Ｍｏ３Ｓ４Ｍｎ＋（Ｍ＝Ｆｅ、Ｎｉ，ｎ＝４；Ｍ＝Ｃｕ，ｎ＝５）分别进行分子轨道计算。根据计算得到的簇离子中的原子表观电荷和成键指标，说明Ｆｅ、Ｎｉ、Ｃｕ＋与Ｍｏ３Ｓ成键作用的相对强度依次是Ｆｅ－Ｍｏ＞Ｎｉ－Ｍｏ＞Ｃｕ＋－Ｍｏ。比较了用含组态作用的ＩＮＤＯ／Ｓ方法计算得到的电子跃迁能与实验得到的电子吸收光谱值，并讨论了吸收峰归属情况。对于Ｍ为Ｆｅ、Ｎｉ的簇离子Ｍｏ３Ｓ４Ｍ４＋，最低能量的电子跃迁吸收峰起源于异金属间电荷转移跃迁（ＭＭ’ＣＴ）；而Ｍｏ３Ｓ４Ｃｕ（５＋）簇离子观察到的吸收峰主要是Ｍｏ３Ｓ芯的局域内电荷转移跃迁。根据理论计算结果，由Ｃｕ＋离子到Ｍｏ３Ｓ的电荷转移跃迁谱线，大约在４６０００ｃｍ－１以上才能观察到吸收峰。从Ｍｏ３Ｓ４Ｆｅ４＋次低能量吸收峰的实验值１６６００ｃｍ－１和理论值１６５００ｃｍ－１与Ｍｏ３Ｓ的最低能量吸收峰的实验值１６６００ｃｍ－１和理论值１６９００ｃｍ－１比较，表明无论从理论上或实验上都能证实簇离子Ｍｏ３Ｓ４Ｆｅ４＋在能量为１６６００ｃｍ－１处的吸收峰是起因于Ｍｏ３Ｓ芯的局域内电荷转移跃迁。     

The effect of injection procedures on efficiency in micellar electrokinetic capillary chromatography

Summary Micellar electrokinetic capillary chromatography (MECC) involves the application of a high voltage (10–30 KV) across a capillary column (75μm i.d.) which is filled with a solution containing micelles. The mobile phase in this work consisted of sodium dodecyl sulfate in an aqueous borate/phosphate buffer system. Injection parameters in MECC were investigated to minimize the contribution to band-broadening resulting from the injection process. Efficiencies as high as 240,000 theoretical plates/meter are reported.     

Synthesis and formulation of vinyl-containing polyacids for improved light-cured glass-ionomer cements

Vinyl-containing poly(acrylic acid-co-itaconic acid) copolymers were synthesized and used to formulate light-curable cements containing reactive glass fillers (Fuji II LC). The conditions for light curing were studied and optimized. Effects of molecular weight (MW), grafting ratio, comonomer, liquid composition, powder/liquid (P/L) ratio, glass powder and aging were evaluated. The results show that the vinyl-containing glass-ionomer cements (GICs) prepared in this study exhibit higher compressive strength (CS, 225.6 MPa), diametral tensile strength (DTS, 28.4 MPa) and much higher flexural strength (FS, 116.4 MPa), as compared to commercial Fuji II LC GIC (186.6 in CS, 19.1 in DTS and 57.1 in FS). The optimal light-exposure time was found to be around 10 min, and concentrations of CQ and DC were 0.5% (by weight) and 1.0%, respectively. Effects of MW, grafting ratio, P/L ratio and content of polymer in the liquid formulation were significant. The highest strengths were found for the optimal formulations where the MW was 15,000 (weight average), grafting ratio 25 mol%, P/L ratio 2.7 and liquid composition 50:20:30. During aging, the cement showed an increase of strength over the first week and then no change for a month. SEM analysis suggests that more integrated microstructures and smaller glass particles can lead to higher FS and higher polymer content in GICs leads to tough fracture surface and plastic deformation.