Ultrasonic characterization of heavy metal TeO2–WO3–PbO glasses below room temperature

The longitudinal ultrasonic attenuation measurements have been made using pulse echo method at fundamental frequencies of 2, 4, 6 and 8 MHz in 20WO₃–(80−x) TeO₂–xPbO ternary tellurite glasses (x=10, 12.5, 15, 17.5 and 20 mol%) in the temperature range 160–280 K. The results showed the presence of a broad peak which shifts to higher temperature with increasing frequency. The ultrasonic attenuation peaks suggest that the experimental behavior is controlled by thermally activated structural relaxations. The internal friction, acoustic activation energy, deformation potential, relaxation strength, number of loss centers and density of state have been calculated both as a function of temperature and PbO content. The acoustic activation energy was found to decrease from 0.156 to 0.135 eV with the increase of PbO content. The results showed that both the number of loss centers and their activation energy decrease with the atomic ring size. An increase in the density of state is observed with addition of PbO content at the same frequency in the whole range of temperature which is associated with structural units formed when PbO is added.     

Optical properties in a two-dimensional quantum ring: Confinement potential and Aharonov-Bohm effect

Optical properties of a two-dimensional quantum ring with pseudopotential in the presence of an external magnetic field and magnetic flux have been theoretically investigated. Our results show that both of the pseudopotential and magnetic field can affect the third non-linear susceptibility and oscillator strength. In addition, we found that the oscillator strength and the absolute value of the resonant peak of the linear, non-linear and total absorption coefficient demonstrates the Aharonov-Bohm oscillation with magnetic flux, moreover, changes in confinement potential can influence the Aharonov-Bohm oscillation in peak while the resonant peak value of the linear, non-linear and total refractive index changes decreases as magnetic flux increases.     

Universal scaling for the dilemma strength in evolutionary games

Why would natural selection favor the prevalence of cooperation within the groups of selfish individuals? A fruitful framework to address this question is evolutionary game theory, the essence of which is captured in the so-called social dilemmas. Such dilemmas have sparked the development of a variety of mathematical approaches to assess the conditions under which cooperation evolves. Furthermore, borrowing from statistical physics and network science, the research of the evolutionary game dynamics has been enriched with phenomena such as pattern formation, equilibrium selection, and self-organization. Numerous advances in understanding the evolution of cooperative behavior over the last few decades have recently been distilled into five reciprocity mechanisms: direct reciprocity, indirect reciprocity, kin selection, group selection, and network reciprocity. However, when social viscosity is introduced into a population via any of the reciprocity mechanisms, the existing scaling parameters for the dilemma strength do not yield a unique answer as to how the evolutionary dynamics should unfold. Motivated by this problem, we review the developments that led to the present state of affairs, highlight the accompanying pitfalls, and propose new universal scaling parameters for the dilemma strength. We prove universality by showing that the conditions for an ESS and the expressions for the internal equilibriums in an infinite, well-mixed population subjected to any of the five reciprocity mechanisms depend only on the new scaling parameters. A similar result is shown to hold for the fixation probability of the different strategies in a finite, well-mixed population. Furthermore, by means of numerical simulations, the same scaling parameters are shown to be effective even if the evolution of cooperation is considered on the spatial networks (with the exception of highly heterogeneous setups). We close the discussion by suggesting promising directions for future research including (i) how to handle the dilemma strength in the context of co-evolution and (ii) where to seek opportunities for applying the game theoretical approach with meaningful impact.     

固体材料脆性断裂的多尺度时空模型(英文)

通过实例分析了动态断裂过程所固有的典型动态作用,基于断裂孵化时间理论的时空结构方法提出了固体材料断裂的统一解释.此外,还提出了计及尺度效应的广义断裂模型,该模型可以用于预测准脆性非均质材料的多尺度断裂,并证明此模型基于实验室尺度的实验数据可以预测更高尺度(真实尺度)的宏观断裂.     

Role of cleaning methods on bond quality of Ti coated glass/imidex system

Thin film materials are widely used in the fabrication of semiconductor microelectronic devices. In thin film deposition, cleanliness of substrate surface have become critically important as over 50% of yield losses in integrated circuit fabrication are caused by microcontamination [1]. There are many wafer cleaning techniques. The most successful approach for silicon wafer cleaning technique is RCA clean [2]. But for glass substrate it is still not known which procedure of cleaning is the best. This paper provides an understanding of the right way of glass wafer cleaning method, with a focus towards identifying good bond strength. Two wafer cleaning techniques have been used for cleaning glass substrates in the context of laser micro-joining of dissimilar substrates. First cleaning procedure involves two steps, first cleaning in acetone solution and then in DI water solution. After each step dried with N₂. Second cleaning procedure involves four steps, first cleaning with 1% Alconox solution, second in DI water, third in acetone solution and finally in a methanol solution and dried with N₂ after each step. Deposition of Ti thin film on top of these two types of substrate using DC magnetron sputtering method also showed better adhesion of Ti film on glass for the second type of cleaning method. Scanning electron microscopy (SEM) analyses of the lap shear tested failed surfaces for these two kinds of samples revealed strong bond for samples prepared by second cleaning method compared to first cleaning method. Characterization of these two sets of samples using X-ray photoelectron spectroscopy (XPS) has shown excellent contamination removal for the second cleaning method. This modification is believed to be due to reduction of carbon contamination.     

Effect of annealing prior to cold rolling on magnetic and mechanical properties of low carbon non-oriented electrical steels

The effects of annealing prior to cold rolling on the microstructure, magnetic and mechanical properties of low-C grain non-oriented (GNO) electrical steels have been investigated. The grain structure of hot-rolled electrical steel strips is modified by annealing at temperatures between 700 and 1050 °C. Annealing at temperatures less than the ferrite to austenite+ferrite transformation temperature on heating (Ac₁) causes a marginal effect on the grain size. However, annealing in the intercritical region at temperatures between Ac₁ and Ac₃ (the ferrite+austenite to austenite transformation temperature on heating) causes rapid decarburization and development of large columnar ferrite grains free of carbide particles. This microstructure leads, after cold rolling and a fast annealing treatment, to carbide free, large ferrite grain microstructures with magnetic and mechanical properties superior to those observed typically in the same steel in the industrially fully processed condition. These results are attributed to the increment in grain size and to the {1 0 0} fiber texture developed during the final annealing at temperatures up to 850 °C. Annealing at higher temperatures, T>Ac₃, results in a strong {1 1 1} fiber texture and an increase of the quantity of second phase particles present in the microstructure, which lead to a negative effect on the final properties. The results suggest that annealing prior to cold rolling offers an attractive alternative processing route for the manufacture of fully processed low C GNO electrical steels strips.     

Synchronization of complex community networks with nonidentical nodes and adaptive coupling strength

In this Letter, the complex dynamical networks with community structure and nonidentical nodes are considered. The globally asymptotical synchronization of the time-delayed complex community networks onto any uniformly smooth state is studied. Some simple and useful criteria are derived by constructing an effective control scheme and adjusting automatically the adaptive coupling strength. Finally, the developed techniques are applied to two complex community networks which are respectively synchronized to a chaotic trajectory and a periodic orbit, and numerical simulations are provided to show the feasibility of the developed methods.     

聚酯薄膜复合材料带状脉冲形成线传输介质

介绍了一种电气绝缘柔软复合材料——DMD膜,通过对膜结构的分析,设计了一种串联等效电路模型对其进行分析。运用该模型,对DMD膜在浸渍前和浸渍后两种情况下的介电常数和介电强度进行了求解并给出计算公式。从公式可以看出:DMD膜的介电常数在浸渍前后有明显的变化,浸渍后的介电常数得到了显著的提高,并且变化率较小;浸渍后DMD膜的介电强度高于未浸渍DMD膜的介电强度。当浸渍料介电常数愈大,聚酯材料上承受的电场强度愈大,浸渍料上承受的电场强度愈小,由于聚酯材料的耐压强度很高,所以整个传输线的介电强度得到提高。     

A Weighted Evolving Network with Community Size Preferential Attachment

Community structure is an important characteristic in real complex network. It is a network consists of groups of nodes within which links are dense but among which links are sparse. In this paper, the evolving network include node, link and community growth and we apply the community size preferential attachment and strength preferential attachment to a growing weighted network model and utilize weight assigning mechanism from BBV model. The resulting network reflects the intrinsic community structure with generalized power-law distributions of nodes＇ degrees and strengths.     

Freezing-off in disc cavities

A semi-quantitative analysis is presented of freezing-off in a disc cavity during the injection moulding of thermoplastics. A criterion is obtained which enables the occurrence of freezing-off to be predicted, at least crudely. The form of the criterion is found to depend on the direction of flow (radially outward or inward) in the disc.