Numerical study of hysteresis in annular swirling jets with a stepped‐conical nozzle

This study investigates the experimentally observed hysteresis in the mean flow field of an annular swirling jet with a stepped‐conical nozzle. The flow is simulated using the Reynolds‐averaged Navier–Stokes (RANS) approach for incompressible flow with a k–ε and a Reynolds stress transport (RSTM) turbulence model. Four different flow structures are observed depending on the swirl number: ‘closed jet flow’, ‘open jet flow low swirl’, ‘open jet flow high swirl’ and ‘coanda jet flow’. These flow patterns change with varying swirl number and hysteresis at low and intermediate swirl numbers is revealed when increasing and subsequently decreasing the swirl. The influence of the inlet velocity profile on the transitional swirl numbers is investigated. When comparing computational fluid dynamics with experiments, the results show that both turbulence models predict the four different flow structures and the associated hysteresis and multiple solutions at low and intermediate swirl numbers. Therefore, a good agreement exists between experiments and numerics. Copyright © 2006 John Wiley & Sons, Ltd.     

THE UNIQUENESS OF A TRANSONIC SHOCK IN A NOZZLE FOR THE 2-D COMPLETE EULER SYSTEM WITH THE VARIABLE END PRESSURE

In this paper, by use of the methods in [1-3], we establish the uniqueness of a 2-D transonic shock solution in a nozzle when the end pressure in the diverging part of the nozzle lies in an appropriate scope. Especially, we remove the crucial but unnatural assumption in recent references which the transonic shock must be assumed to go through a fixed point in advance.     

微波消解、流动注射-氢化物发生原子荧光光谱法测定三七中硒含量

用微波消解、流动注射－氢化物发生原子荧光光谱法测定三七中硒，通过实验选择最优化的测定条件，方法的检出限为0．30μg.L^-1，相对标准偏差为1．2％，线性范围为0－100μg.L^-1，相关系数为0．9999，回收率为96．7％－100．7％。     

流动注射氢化物发生-蒸气贮存脉冲进样原子荧光法测定地质样品中的痕量砷

本文研究了流动注射氢化物发生－蒸气贮存脉冲进样原子荧光法测定地质样品中痕量砷的方法，砷的灵敏度提高17.6倍，精密度(RSD)为2.1%，检出限为0.32ng/mL。用于地质标准样的测定，结果满意。     

Reproducibility in capillary supercritical fluid chromatography: Comparison of injection techniques

An analysis of the precision obtained using commercially available microvalve injectors is reported for three modes of injection: conventional split; timed-split; and direct. Results from this study show that good precision (< 3% RSD for external standard and < 1% RSD for internal standard methods) can be obtained with capillary supercritical fluid chromatography (SFC). However, particular attention must be paid to the type of valve used, the orientation of the column relative to the valve, the mode of interfacing or connecting the column to the valve, and the type of pressure or density programming used for the analysis as all of these factors will affect the reproducibility.     

Simulation of the starting flow in a wedge–like nozzle

The starting process of the flow in a wedge-like expansion nozzle of a shock tunnel is simulated by an unsplit 2-D GRP scheme on an unstructured grid. The scheme is briefly outlined and results are presented and discussed in comparison to the experimental (shadowgraph) findings obtained by Amann. The simulated pattern of reflected and transmitted shock waves in the nozzle inlet region and inside the nozzle is found to agree well with the experimental data. Received 5 April 1996 / Accepted 16 June 1997     

简易毛细管气相色谱冷柱头进样法

介绍了一种在无冷柱头进样器和特殊注射器情况下简便可行的冷柱头进样技术。以海洛因、秋水仙碱、正三十烷醇为研究对象，考察了本方法的定性、定量偏差，提出两种溶质聚焦方法。     

微型超高压宝石喷嘴内部的空化与磨损

宝石喷嘴是影响超高压水射流切割系统工作效率的重要部件,而宝石内部的空化直接影响射流的形成,也是宝石磨损的重要原因之一。对400 MPa压力范围内宝石孔内部的空化两相流进行了数值模拟,阐述了射流在宝石内的形成过程,分析了长径比、压力和入口形状对宝石内空化的影响,并在相应压力下对宝石喷嘴的磨损进行了实验研究。结果表明:宝石内部的空化发展程度随着长径比的增大而减弱;在一定的长径比范围内,空化可以发展到喷嘴出口,并最终使射流的初始直径小于喷嘴直径,且在此条件下当压力升高时,射流的初始直径增大;良好的入口形线可以降低空化的发展程度;宝石入口的磨损较出口更显著,空蚀和高压水的冲蚀造成了宝石孔边缘形状的破坏,这种破坏随着压力的升高而加剧,选择合适的长径比是减少冲蚀磨损的有效途径。